Many people like hardwood flooring, what are the benefits of underfloor heating and wood flooring?

Wood flooring has obvious advantages in terms of thermal insulation performance of indoor temperature, and floor tiles have relatively poor thermal insulation performance due to fast heat conduction. Especially in the spring and autumn seasons adjacent to winter, the floor tile surface will give people a cold feeling, which is not comfortable enough. The surface of the floor tile has a smaller coefficient of friction than the wooden floor, which makes it easier to slipIt is easy to fall and bump into small family accidents, so in families with small children and the elderly, it is more suitable to choose wooden flooring.

Many consumers think that wood floors are much more expensive than floor tiles, in fact, better floor tiles are similar to wood floors, and some are even dozens of yuan or even hundreds of yuan more expensive than wood floors. In the case of the same **, the floor tiles are not free because they are very prone to damage in the pavingThere is no professional paving team for paving, consumers can only find someone to pave by themselves, and the labor cost and cement sand and other accessories will cost dozens of yuan per square meter, so that the cost of floor tiles will be much higher. <>

Wooden floorsDifficult maintenance is a thing of the past, and now both multi-layer solid wood flooring and laminate flooring have greatly improved the wear resistance, and laminate flooring is exempt due to the good wear resistance factorWent to a lot of problems in later maintenance. The floor tiles will appear black joints because they are not easy to clean and take care of for a long time, and the floor tiles will become darker and darker because of dirt, which will not only affect the appearance but also affect the health. <>

Wooden floors regulate air humidity. Although the floor tiles do not absorb water and are easy to care for, they are cold and may be radioactive. Wooden flooring can absorb moisture, reduce noise, warm in winter and cool in summer；On the other hand, wood flooring is more intimate, soothing and has a stress-relieving effect for urban people who are now under increasing stress.

The floor heating environment has high requirements for the floor, the oak solid wood floor is very suitable for the geothermal environment, and the front and back of the Fudeli oak pure solid wood floor are treated with 11 primers and 4 topcoats simultaneously, realizing 360 degrees of three-dimensional waterproof and moisture-proof, on this basis, with the patented technology of meshing lock and hidden buckle, it easily solves the problem of heating stability of the solid wood floor in the geothermal high temperature environment. It is not only wear-resistant and anti-fouling, convenient to disassemble and assemble, and can be reused, but also perfectly retains the natural color and texture of solid wood flooring, which not only satisfies consumers' healthy and comfortable experience of geothermal energy, but also fully enjoys the natural noble characteristics of solid wood.

Geothermal heating system is the most comfortable way to heat, the indoor surface temperature is uniform, the room temperature gradually decreases with the increase of height from bottom to top, and this temperature curve is just in line with the physiological needs of people.

Floor tiles because the paving is very prone to damage phenomenon and do not implement free paving and even no professional paving team, consumers can only find their own people to pave, labor costs and cement sand and other accessories per square meter to spend dozens of yuan, so calculated, the cost of floor tiles will be much higher.

It is very easy to break the phenomenon and do not implement free paving or even no professional paving team, consumers can only find someone to pave by themselves

The electric radiator is not hot, which may be due to the following problems: 1. The power cord in the machine is broken, especially at the joint; 2. The power cord is broken or the power plug is damaged.

First, first of all, from the point of view of heat preservation.

In terms of heat dissipation, the heat dissipation of wood flooring is certainly not as good as that of ceramic tiles, but the advantage of this is that the thermal insulation of Motian wood flooring is much stronger than that of ceramic tiles. This means that when the floor heating is heated to the same temperature, the floor heating is turned off, and the house with wooden floors will be able to stay warm for a longer time than the house with tiles.

Second, from the perspective of environmental protection.

The main reason why many people are worried about the use of wood flooring in floor heating is that the floor will contain formaldehyde, which will accelerate the release and volatilization of formaldehyde when heated by floor heating. At this stage, laminate flooring is currently recognized as the most suitable type of wood flooring for floor heating, and the thickness of laminate flooring is mostly 6 mm and 9 mm, which is easy to conduct the heat generated by the geothermal system to the surface, and has better heat transfer performance. Laminate flooring has always been the main force of floor heating flooring, but we need to be vigilant that many businesses in the production of laminate flooring, will inject substandard chemical glue, so that its formaldehyde content exceeds the standard, experts recommend that you must choose E1 or above environmental protection standards of laminate flooring.

Third, from the perspective of comfort.

Many people will choose wood flooring because it will give people a very comfortable, natural and beautiful appearance in appearance, and at the same time bring a warm and comfortable feeling to the feet. This is a different tile, it is hard and it is difficult to create a feeling of warmth.

Fourth, from the perspective of stability.

A large part of the population will say, is it really okay to have underfloor heating? Ceramic tiles are more stable than wooden floors, and they will not be deformed and warped when they encounter water, especially under high temperature conditions, they will not be deformed and warped like wooden floors, so ceramic tiles are better to use than wooden floors. Here you can be advised to choose multi-layer parquet.

Because in the same environment, multi-layer parquet is the most stable, and it is not easy to deform.

Square peg. Because there are safety hazards in wooden flooring, and underfloor heating is more suitable for ceramic tiles, I don't think wooden flooring is suitable.

It is not suitable to lay wooden floors, because the temperature of the floor heating at home is relatively high, which is particularly easy to cause the wooden floor to crack, and the service life of the wooden floor will be shortened.

I don't think it's suitable because the temperature of the underfloor heating is relatively high, and if you put a wooden floor, it is likely to cause corrosion.

Floor heating can be laid with wooden flooring, but it is recommended that it is best to choose composite flooring as floor heating flooring, which can ensure the normal use of floor heating while ensuring good conduction and heat dissipation.

Precautions: First, look at the moisture content of the floor. The moisture content is generally less than 14% to be considered a qualified product.

Second, look at the processing accuracy of the floor. Use two pieces of flooring together to see if the seams are tight.

3. Look at the paint finish of the floor.

Fourth, when opening the package for acceptance, see whether the board, color and wood species are consistent with the specifications, colors and wood species at the time of delivery.

Fifth, see if there are any shortcomings in the delivery floor. For example, there are holes, insect eyes, scars on the surface, obvious deformation, bursting, whether the paint surface is complete and smooth, etc.

6. Acceptance of installation materials. It is best to choose the dragon tiger board because it does not contain formaldehyde, benzene and other harmful substances, and it is a waterproof, mildew-proof, deformation-proof material with high density and very stable material! If you use splint or wood to make the backing board, it must be dried, anti-corrosion, mildew-proof, and insect-proof before it can be installed, otherwise it will be moldy and deformed after installation, and the formaldehyde of the splint exceeds the standard, and 70% of the splint is unqualified.

Definition of underfloor heating:

Floor heating refers to the floor suitable for low-temperature hot water floor heating (referred to as floor heating). The quality is not good, it is not strictly dried, so the water content is too high, and after use, as the moisture content decreases, the wood shrinks and cracks occur.

How to measure whether it is a floor heating floor:

There are many specific technical parameters that are required to measure a true geothermal floor. First of all, it must have good heat dissipation. Floor heating floors are very particular about the choice of materials, and those special substrates that meet the requirements of wood density are strictly selected.

The thickness of the floor is between 6 5 and 8 5 mm (the standard thickness of geothermal floors) to ensure that the floor has good air permeability and heat dissipation. The second property is heat resistance.

Advantages of underfloor heating:

1. High efficiency and energy saving 2, good thermal stability 3, space saving 4, convenient room temperature adjustment 5, sound insulation and environmental protection.

It is best to lay a special floor for underfloor heating, or a solid wood multi-layer floor.

Special precautions.

Mixed constructions cannot be crossed. When laying the floor, it is not possible to cross-mix the structure. Once the paving is complete, the floor needs to be allowed to dry for more than two or four hours to ensure that the adhesive is fully cured.

Placing furniture does not affect the underfloor heating, so try not to place legless furniture on the underfloor heating floor, and do not fix home accessories to the ground. This is because the hot air in the room conducts from the floor to the whole room, and if the heat dissipation surface is blocked by a large area, the heat dissipation in the room is not smooth, and it is easy to deform the floor.

The first time you use underfloor heating, you need to let the temperature rise slowly. Because once the temperature is rising sharply, then it is easy to cause deformation of the floor.

Listen to me right, the floor heating should be the same as the parquet, and his deformation is the best. He will use the most beautiful solid wood grain for the first surface. Unlike solid wood, he won't pick wood for you.

Solid wood can not be geothermized, because the keel is to be beaten, and if the keel is not hit, there is no feeling of solid wood. And to punch the keel to the ground punch bit, so that it is easy to burst your floor heating.

Can be paved. Laminate flooring, do not use solid wood or bamboo. Now the quality of the floor is okay, try to choose a thick floor for floor heating, don't pave.

Clause.

First, you must first understand the characteristics of solid wood flooring, we all know that solid wood flooring is not only environmentally friendly, but also atmospheric grade, but different materials of solid wood flooring, its number of variants is different. The final effect of different processes is different.

Clause. Second, the choice of the variety and category of floor heating is of great significance, which determines what kind of floor decoration materials you should choose.

Clause. 3. How professional and responsible is the floor heating company? Understanding and application of physical principles.

Clause. Fourth, the second generation of superconducting thermal technology floor heating in spring, is the leader in the floor heating industry, a new level of surface heat dissipation technology, so that the heat in every corner of your room is very balanced, efficient heating design concept and rigorous construction specifications, whether you are solid wood floor or laminate flooring, whether you are high-end or low-end flooring, will not be deformed, because it is a new surface heat dissipation technology.

Floor heating flooring can not be used general solid wood flooring, it is best to use solid wood flooring, laminate flooring, laminate flooring or ceramic tiles for floor heating.

The choice of floor heating floor should pay attention to meet the following conditions:

The floor is dimensionally stable and able to withstand temperature changes without damage;

No deformation, cracking, small thermal expansion and contraction coefficient;

Environmentally friendly, no formaldehyde and harmful gas release;

Not afraid of water soaking the floor (to prevent the floor heating pipe from breaking, water flowing out of the floor and damaging the floor).

The owner must pay attention to the particularity of the floor heating floor when choosing the floor heating floor, and ensure the heating effect of the floor heating on the basis of the beautiful and generous floor.

Floor heating can be laid with solid wood floors, choose the best point of the floor

The emergence of floor heating makes the cold winter warmer, which is deeply loved by the majority of consumers, and many users will also lay floors on floor heating, making the home more high-end and more generous. But is it really good to lay wooden floors with underfloor heating? The following brings you the hazards of floor heating and wooden flooring, I hope it will help you.

First, the hazards of floor heating and wooden flooring.

Some wood floors themselves are of poor quality, although they are no different from brand floors on the surface, in fact, the floors contain a lot of formaldehyde, because the glue used to bond wood floors adds a lot of chemicals, which will double the release of formaldehyde at high temperatures, which has a great impact on the health of residents. However, in the manufacturing process of brand flooring, glue that is less harmful or harmless to the human body will be added, and will not cause formaldehyde effects to the occupants.

Second, it is better to use floor tiles for floor heating.

1. Comparison of environmental protection.

Nowadays, everyone attaches great importance to environmental protection, in which the floor tiles are fired at high temperature in the production process, as long as the floor tiles meet the national standards, they will not emit harmful substances due to floor heating; Although wood flooring is more environmentally friendly, it will release a certain amount of formaldehyde after high temperature of floor heating, especially laminate flooring, which has a higher formaldehyde content.

2. Comparison of heat retention.

The thermal insulation of the floor is very important, in contrast, the floor insulation is better, and the floor tiles can heat up quickly. Studies have shown that wood floors can maintain a higher temperature when underfloor heating is turned off at the same temperature.

3. Comfort comparison.

The color of the floor is natural, beautiful and generous, and the feet feel comfortable, while the floor tiles are hard and look cold, but they are also more favorable, and you can buy them according to your preferences.

Conclusion of the article: The relevant knowledge about the hazards of floor heating and wooden flooring will be introduced to you here, I hope it will be helpful to you. Whether it is flooring or tiling, each has its own advantages and disadvantages, and the one that suits you is the best.