-
There are still very few in the country, very little, very little.
-
According to your description and **, it can be preliminarily judged that this problem is caused by the lack of T or M serial numbers in front of the G90 instruction in program mode.
In the Mitsubishi M70 system, the G90 command needs to be used with a T or M serial number. The T serial number is used to indicate the tool compensation, and the M serial number is used to represent the table coordinate system. If the G90 command is entered in program mode without the corresponding T or M serial number, the system will display the error message "Incorrect Absolute Delta" message.
The solution to this problem is to add the T or M sequence number correctly to the program, or to add other repentance instructions to the front of the G90 instruction to relieve hunger, such as G00 or G01. When entering G90 instructions in program mode, you should select the appropriate T or M serial number according to your needs, and ensure that the syntax of the program is correct to avoid grammatical errors or logical errors.
It should be noted that there may be some differences in the control system of different machine tools, and the specific operation methods and instructions may be different. If you encounter problems, you can refer to the operation manual of the machine or consult the relevant technician.
-
Based on the information you provided, it may be because the G** system is not set up correctly in your program mode.
On CNC machines, the G** system is used to control the movement and position of the tool. G90 and G91 are two common G** systems that are used for absolute and incremental coordinates, respectively. If the machine does not support the g** system you are trying to use, an error will occur.
You can try the following steps to fix this issue:
Make sure you have entered the G90 command correctly. You can try to enter G90 in MDI mode and check if the machine responds correctly. If it works fine in MDI mode, the problem may be related to program mode.
In program mode, check if there are other ** in your program that conflicts with the G90. For example, if you have other commands in your program that set the g** system to g91, it can lead to an error. Make sure that the program contains only the ** you need, and check for grammatical or spelling mistakes.
Hope this information is helpful to you. If you have any other questions about guessing the bush wheel, please feel free to ask.
-
Mitsubishi M70 system.
1.Preparation before processing.
Before machining, the machine needs to be inspected and maintained. Check whether the parts of the machining center are in normal condition, and clean up the dust, oil and other impurities of the machining center in time. At the same time, it is also necessary to check the workbench and tool magazine of the machining center to ensure that it is in good working condition.
2.Machining program settings.
Before machining, it is necessary to write the corresponding processing program according to the requirements of the workpiece to be processed. When writing the machining program, it is necessary to pay attention to the setting of parameters such as cutting speed, machining depth, and cutting feed rate of each operation. At the same time, when writing the machining program, it is necessary to consider the tool magazine and tool clamping device of the machining center to ensure that the selected tools can be correctly clamped and used.
3.Load the workpiece.
After the machining program and tools are ready, Sakura is required to mount the workpiece to be machined on the machining center. Before installing the workpiece, it is necessary to ensure that there are no scratches or damage to the surface of the workpiece. At the same time, it is necessary to check how the workpiece is fixed to the machining center and ensure that it is safe and reliable.
4.Debugging settings.
After the installation of the workpiece is completed, it is necessary to set up the machine for commissioning. The debugging settings include the setting of tool offsets, table coordinate systems, cutting parameters, and other aspects. These settings can make the machining center process according to the preset processing program, so as to ensure the stability of product quality and the improvement of processing efficiency.
5.Machining operations.
Before the machining begins, the machining program needs to be started so that the machining center can start the automatic machining according to the steps. In the machining process, it is necessary to pay attention to observe the machining status and processing quality, and adjust the cutting parameters and processing speed in time. At the same time, it is also necessary to pay attention to the stability and safety of the machining center when machining large workpieces.
6.Inspection and quality control.
At the end of the machining, the results need to be inspected and quality controlled. The inspection results should meet the requirements, and the dimensional accuracy and surface quality of the workpiece should meet the expected requirements. If a problem is found, the cause needs to be traced and addressed to ensure the consistency of product quality and the improvement of processing efficiency.
7.Routine maintenance.
In the process of using the Mitsubishi M70 system machining center, routine maintenance is required. Routine maintenance includes everything from machine cleaning, lubricant replacement, and parts inspection. Only by keeping the machine in good condition can it have a longer service life and higher production efficiency.
Mitsubishi M70 system machining center is a kind of CNC machine tool equipment with stable performance and simple operation, and the equipment is simple to operate and easy to use. When using this equipment, you only need to follow the above steps to easily complete high-quality machining tasks.
-
Guess that you may be using a machining center with a Mitsubishi M70 system, and you have entered the G90 command in program mode, but there is no corresponding T or M serial number, resulting in the error message "The absolute incremental value mode is incorrect" 1.
The G90 instruction is an instruction used to indicate the programming of the absolute sitting royal opening standard, and it needs to be used with a T or M serial number. The T serial number is used to indicate the tool compensation, and the M serial number is used to indicate the workbench sitting liquid royal standard system 21. If you want to program with absolute coordinates, you need to add the correct T or M sequence number in front of the G90 instruction, or some other valid instruction such as G00 or G011.
If you don't want to use absolute coordinate programming, you can use the G91 instruction to represent incremental coordinate programming. Incremental coordinate programming is a method of programming the amount of displacement of a tool from the previous position and the next position2.
-
Mitsubishi M60S system 2010.
Mitsubishi M60S system how to modify the parameters of the Mingque:
With RS232 Biji-pure must have transmission software to transmit, the parameters of the system do not need to be changed, the main transmission speed is 9600 or 19200, this can be changed through the transmission software, change to match the system, M60s, you can see that it is 9200 or 19200 in the transmission interface.
The Mitsubishi Group is a loose entity formed by the dissolution of the original Mitsubishi zaibatsu in Japan, and the name Mitsubishi means "three" and bishi means "water chestnut".
The first Mitsubishi company was Yataro Iwasaki, who took over the Nagasaki Shipyard, which was officially run by Japan in 1870, and the shipyard was renamed the Mitsubishi Chamber of Commerce in 1873. Mitsubishi then ventured into mining, shipbuilding, banking, insurance, warehousing, and later paper, steel, glass, electrical equipment, aircraft, oil, and real estate. Today, Mitsubishi has built up a series of companies that have played a pivotal role in the modernization of Japan's industry.
-
: One of the operation panels is a crystal panel, and the other is ordinary, which is the calculation speed, machining accuracy, etc.
-
The Mitsubishi System M70A is not much different from the M70V, but the power is different.
The Mitsubishi CNC system works by two parts: CNC hardware and CNC software. The hardware of the numerical control system is composed of numerical control device, input and output device, driving device and machine tool electrical logic control device.
Working principle: The control system carries out interpolation operation according to the processing workpiece program, and issues control instructions to the servo drive system; The servo drive system amplifies the control instructions, and the servo motor drives the machinery to move according to the requirements; The measuring system detects the position or speed of the machine and feeds back to the control system to correct the control command. These three parts are organically combined to form a complete closed-loop control CNC system.
-
Mitsubishi M70A and M70V are different in power.
-
In Mitsubishi PLC, both M7 and M701 are input registers marked with an M to store the logical state. But their specific usage and function are different. - m7:
It is a conventional input register, usually used to indicate the status of input devices such as switches and buttons. For example, when a button is pressed, the value of m7 will change from 0 to 1, indicating that the button has been pressed. - m701:
is a special input register that is usually used to represent the state of an encoder or rotary encoder. An encoder is a device used to measure the angle of rotation or linear distance of movement, and is often used in the field of industrial automation. The M701 register records the position and orientation of the encoded former, helping the PLC controller for precise control and positioning.
Therefore, M7 and M701 are functionally different although they are both input registers that start with m. In PLC programming, the appropriate register type should be selected according to the actual application scenario.
-
Yes, the M7 and M701 differ in Mitsubishi PLC. The M7 is a model of the Mitsubishi PLC series, which usually refers to the CPU module in the Melsec-Q series. The CPU modules of the M7 series have high-speed processing power and large memory capacity, which are suitable for applications such as advanced control field, data processing, and network communication.
The M701 is an extended RAM module in the Melsec-Q series that expands the memory capacity of the CPU module. The M701 module offers 256KB memory expansion, which can be programmed and configured via the Melsoft series of programming and correction software. Therefore, the M7 and M701 are different modules with different functions and application scenarios.