How can an iPad flash without entering recovery mode

If you can't update or restore your iPhone, iPad, or iPod touch

You can put your iOS device into recovery mode and restore it using iTunes.

You may need to use recovery mode to restore your device when:

iTunes doesn't recognize your device, or shows that it's in recovery mode.

You see the Connect to iTunes screen.

Learn what to do if you see the progress bar on your screen for a few minutes.

Put your device into recovery mode and set it up again.

1.Make sure you're using the latest version of iTunes web links.

2.If iTunes is turned on, turn it off. Connect your device to your computer, then open iTunes.

3.With the device connected, follow these steps to force restart the device:

4.iPhone X, iPhone 8, or iPhone 8 Plus: Press and quickly release the Volume Up button.

Press and quickly release the volume down button. Then, press and hold the side button until you see the recovery mode screen.

5.iPhone 7 or iPhone 7 Plus: Press and hold the side button and the volume down button at the same time. Keep holding these two buttons until you see the recovery mode screen.

6.iPhone 6s and earlier, iPad, or iPod touch: Press and hold the Home button and the top (or side) button at the same time. Keep holding these two buttons until you see the recovery mode screen.

4.When you see the option to Restore or Update, choose Update. iTunes will try to reinstall iOS without erasing your data.

Please wait for iTunes **Your device's software. If it takes more than 15 minutes and your device is out of recovery mode, wait for it to end and then repeat the steps above.

5.When Update or Recovery is complete, set up your device.

Method 1: When the phone enters recovery mode, don't plug in the data cable first, turn off the phone, press and hold the home button with your thumb, then plug in the data cable and connect to the computer, and wait for more than ten seconds for the phone to automatically enter the recovery mode.

Open iTunes, tap Recover, tap Restore & Update, tap Next, tap Agree, and the flashing process will be done automatically.

Method 2: Open Weifeng.com, click Apple Tools, click iOS firmware**, click iPhone, click your phone model, click the required firmware version, click Firmware**, click Save, it is recommended to put it in an easy-to-find location, click OK.

**Open iTunes when it is done, the phone enters recovery mode, connect the computer with the left hand and hold the shift key, click Restore, tap the OK iOS firmware, click Open, click Recover, and the flashing process will be completed automatically.

Method 3: Enter the recovery mode on your phone, connect to your computer, open AIS-Helper, click OK, click to enter the flashing page, and click Import.

Click on the best iOS firmware in method 2, click to open, click to flash immediately after the import is completed, click to flash now, the flashing process will be completed automatically, and the flashing process of iPad is the same as that of iPhone.

iTunes is required to restore the iPad after flashing, and the solution is as follows:

Operating Equipment: Dell laptops.

Operating system: win10

Operating procedure: iTunes

Device: iPad mini5

1. Open the iTunes application on your computer.

2. Enter the main program interface of iTunes.

3. Turn off the iPad, press and hold the home button and connect with the computer with a data cable.

4. Wait for the recovery mode to enter automatically.

5. After entering the recovery mode, click "Recover" on the computer.

6. Wait for the recovery to be completed and then the deactivation will be lifted.

One, when your iPad keeps being stuck in recovery mode, it is very likely that something is wrong with the system crash.

Second, you can try to press the "Power + Home Screen" button at the same time to force the iPad to restart and see if it can return to normal.

Third, if iTunes still prompts that an iPad in recovery mode is detected after force restarting, the only way to restore the firmware system is through iTunes on the computer.

Fourth, the specific operation method:

1. Connect your iPad to your computer and turn it off.

2. Press and hold the power on button and the home button at the same time.

3. When you see the white Apple logo, please release the power on and off button, and continue to hold the home button.

4. Turn on iTunes and wait for it to prompt you to resume mode, then you can press and hold the shift key on your keyboard, click "Recover", and select the corresponding firmware to recover.

You can go to Apple's official place and ask them, and if you want to restart it specifically, how about it?

iPad needs to press and hold the Home button in the power-off state and then connect the device to "iTunes" to enter recovery mode.

1. Turn on the computer, double-click the iTunes icon on the desktop of the computer.

2. Enter the main interface of iTunes.

3. Turn off the iPad first, wait for the iPad to complete the shutdown, press and hold the Home button, and connect the device to the computer with a data cable.

4. Then you can see that the iPad automatically enters the recovery mode, and the following picture is the interface of the recovery mode.