Can a wireless router be installed and connected to the Internet without a computer?

You have to have a network port that can access the Internet, link to the router and then set up the router, you can set up the router with a mobile phone, an ipad, and it's okay without a computer. Once you've set it up, you're OK.

It's a bit difficult to set up a router that requires network parameters, IP address subnet mask, gateway, DNS server, and standby server, and these data can only be seen when plugged into the computer. If you don't have a computer, you don't know how to get this data. But you can choose a router, don't buy one that requires you to set up a static network.

Buy the kind of small, no need to set up, plug and play, is the signal weakness.

The wireless status of the wireless router must be turned on the computer first! You can do without it in the future! You can borrow a notebook to mediate.

No, you have to set up the router first and then you don't need a computer, go borrow a computer or ask someone to help, the router has a manual to do it.

You need to set it up on your computer.

Yes, you can connect the settings with your phone.

Yes, but you have to set it up on your computer first, and I use it directly on the network cable with the wireless router.

It should be possible, but you need to set it up with a computer first.

No, the router needs to be set up on the computer, account number, etc.

Yes, you can have a network cable.

Of course, you can, first you have to apply for a broadband, a cat, and then prepare a wireless router. After connecting your phone to the wireless router, enter the default gateway in your phone's browser, or follow the instructions.

Expansion: 1. The wireless router is a router used for users to surf the Internet and has a wireless coverage function. A wireless router can be seen as a device that sends broadband network signals from the wall of your home to nearby wireless network devices (laptops, Wi-Fi-enabled mobile phones, tablets, and all Wi-Fi enabled devices) through the antenna.

Using tablets and smartphones is not as difficult as a computer system.

Yes- - The router does not need to be turned on the computer to run, but the network cable needs to be connected.

Yes, just pull a broadband and plug it into the router.

Yes, there are wireless routers and mobile phones can also access the Internet.

You can buy a wireless router and go to Settings --

Mobile phones can also be used.

If you don't have a computer, as long as you have broadband, the router can use the mobile phone to set the parameters, and the steps to set up the router on the mobile phone are as follows:

1. First, connect the router and the broadband modem with a network cable, and the connection method is to connect the LAN port of the broadband modem with the WAN port of the router through the network cable.

2. After the hardware is connected, use the mobile phone to connect to the wireless signal of the router, then open the mobile phone browser, enter the login address and login password of the router, and select Quick Settings after logging in to the background.

3. Then fill in the broadband account number and password as required.

4. Then set the wireless name and password to save and then the router can be used normally.

If you don't pick it up, you can use it. The router sets up an Internet account and password to automatically log in to the Internet. Connect to the ** line and go online. You can choose Wi-Fi and you can access the Internet.

OK.

However, there are some dial-up networks that need to be bound to the computer IP to access the Internet, and you must set up the computer and mobile phone and bind the MAC to the router.

Then, when using the Internet, you can use the Internet directly without a computer.

1. Connect the external network cable to the wireless route first, and then connect the router to the computer with a network cable (prepare one yourself, there are also some for sale).

2. Turn on the computer and wireless router.

3. Enter in the browser of the computer and press Enter.

Fourth, according to the wireless router manual for wireless router settings, the password of the router is generally admin, dial-up Internet password depends on your home network account opening invoice.

5. The wireless router can be connected directly to the network cable to access the Internet, or it can not be connected to the network cable to access the Internet (the computer must have a wireless network card).

Laptops usually have wireless network cards on them.

To connect to broadband, you need to dial up first, and then connect to a broadband server before you can access the Internet. The reason why you can use the router to turn on the Internet is that you have already filled in the broadband account and password into the router, and as long as the router is powered on, it will automatically dial up the Internet. Therefore, the access settings under the router can be turned on to access the Internet.

It's okay to set up in IE, but it's not as fast as startup connection dialing).

If the computer does not use a router and is directly connected to the home network cable or modem (modem) to surf the Internet, you only need to pull the dial-up icon of ADLS into the startup item to meet the requirements. (Win7 is used as an example below).

In the lower-right corner of the desktop, find the network ID. (If you are not connected to the Internet, it will display an exclamation mark).

Click on the network logo, pop-up window, and click on "Open Network and Sharing Center".

Once you're in the Network & Sharing Center, in the middle, find "Set up a new connection and network" and tap it.

Go to the Settings Connection or Network window and select the first item "Connect to the Internet".

Go to the "Connect to the Internet" dialog box and select "Broadband".

In the next interface, enter the username and password provided by the service provider, check Remember password, set the broadband name, and click Connect.

Next, enter the connection interface, wait for the step to be completed, and the message is successful, then the broadband connection is successfully created. Open the connection and select Properties"option"and turn off all the previous "checks" in "Dial Options".

Use the left mouse button to click the broadband dial icon on the desktop without letting go, and then point to Start in the lower left corner of the program to start. Only release the left mouse button in the startup item, so that the boot autodial is added to the startup item.

First of all, the hardware is installed and connected, the modem is connected to the power supply, and the power indicator lights up. Connect the cable to the connector of the modem.

One end of the network cable is connected to the network cable interface of the modem, and the other end is connected to the network interface on the computer host.

Start your computer system, and in the Network Connections box, click (Create a new connection).

At this time, the New Connection Wizard dialog box will pop up, select (Connect to Internet) by default, and click (Next).

Select the second option (Manually set up my connection) and click (Next).

Select the second option (connect with a broadband connection that requires a username and password), click (Next).

In the field of ISP Name, enter a name at random. Click Next.

Here you need to fill in the account and password, here is an example account (123) password (123). Click Next.

After the settings are completed, there is an additional network connection icon on the desktop, open the network connection point (connection), and you can surf the Internet after the network is connected.