Is it normal for a newly bought Siemens washing machine to have water in the drum?

Reasons why the washing machine can't put water in and how to deal with it:

1. Check whether the faucet has been turned on to see if the water has stopped.

2. Turn on the power supply, the ear is close to the water inlet valve to see if there is a "buzzing" sound, if there is, check whether the tap water is cut off, close the faucet, screw out the water inlet pipe joint to check whether the filter screen of the water inlet valve is blocked by foreign objects, if there is a pull out of the filter screen for cleaning, if the problem has not been solved, the water inlet valve should be replaced, the valve core of the water inlet valve may be stuck and cannot be opened.

3. If the inlet valve does not have a "buzzing" sound, you should try to replace the computer board at this time, and the problem may be on the computer board.

A little water in the drum of a newly bought Siemens washing machine should be normal.

Because every washing machine is in production and assembly, it must go through the mandatory inspection items stipulated in the national standards such as dry operation, water test operation, and leak inspection.

After the washing machine is added with water, it is necessary to drain the water and suction it dry.

But there are some structures where some water may still remain. For example, in the drain valve and hose, there will be no residual test water that has been sucked clean.

I just bought a Siemens washing machine three days ago, and after installation, I found that there was a rubbed mark on the top of the console surface, and there were some white marks on the drum door, I don't know how it was formed, after opening the sliding door, I found that there were some water droplets in the drum, and what was even more annoying was that I found a long hair on the drum wall, which should be normal as long as it does not affect the appearance and normal function. There is a rubbing mark on the top of the console surface, there are some white marks on the roller door, and a long colored hair was found on the drum wall, which was left during installation or packing, handling or disassembling the package. The water inside should be left over from the test run.

Drum washing machines turn on with less water, which is actually not less.

The drum is like a beer bottle placed horizontally, the mouth of the bottle does not come out, it is not that there is no water inside.

Of course, if you feel that it is less, you can also manually add water from the soap dispenser.

When the drum washing machine is cleaned, there is a state of less water inlet, which may be due to insufficient water, or the water inlet equipment of the washing machine itself is faulty, so it is best to recommend that it can be repaired and treated and used reasonably in a normal way to achieve the ideal degree of use.

The amount of water ingress in the drum washing machine is very small. Generally, in the process of laundry, only the splash can be seen, but not the water, which is normal. It is also one of the advantages of water-saving washing machines in front loaders.

Less water inlet into Siemens washing machine drum washing machines is the reason why less clothes enter the washing machine. Ten years ago, with the social requirements of environmental protection and energy saving, various brands of washing machines (drums, wave wheel washing machines, etc.) have realized the intelligent water intake: the water inlet is automatically less when there are fewer clothes entering the washing machine, and the water inlet is automatically more when there are more clothes entering the washing machine.

This washing machine takes in too little water because you turn on the super water saving function, which can be set on the Siemens screen. After the user turns off the super water saving function, they will be able to use the normal state.

Siemens automatic drum washing machine can turn but does not enter the water reasons and treatment methods:

1.Check that the faucet is already on.

2.Solenoid valve filter screen blocking solenoid valve filter screen is a plastic product, when overhauling, remove the water inlet pipe, take out the filter screen with needle-nose pliers, clean up the blockage and then install it.

3.The spool skeleton is corroded, and the spool cannot be engaged after the spool skeleton is corroded. During maintenance, take out the water inlet valve, remove the 4 screws that fix the coil, remove the coil, take off the valve core skeleton, and eliminate the rust on it, so that the valve core can move freely.

4.The conduit hole on the pilot valve is clogged in the washing machine After long-term use, the small hole on the conduit of the inlet valve is clogged with dirt. During maintenance, first take out the valve core skeleton, take off the plastic pilot valve, dredge the early conduit with a thin wire, and then reinstall it.

5.Check that the water pressure is not too low.

6.Check whether the water inlet is blocked by debris, it is recommended to check the water inlet and clean the water inlet filter.

7.After removing the water inlet pipe joint of the washing machine at the machine end, turn on the faucet again to check whether the water is normal.

8.Check the inlet valve for abnormalities. If so, replace it.

Drum washing machine:

1.Originated in Europe, the laundry method is designed to imitate the principle of a stick hammer hitting clothes. The drum washing machine is made of stainless steel inner barrel, mechanical program controller, phosphating, electrophoresis, spraying triple protection of the shell, and a number of bulky cement blocks to balance the huge centrifugal force generated when the drum rotates to do repetitive motion, plus the joint action of washing powder and water to make the clothes clean.

2.Because the materials are mainly made of steel, the life span is generally about 15-20 years.

3.The drum washing machine is controlled by a microcomputer, the clothes are not entangled, the washing is uniform, and the wear rate is 10% smaller than that of the wave wheel washing machine, which can wash cashmere, wool, silk and other clothes, so as to achieve comprehensive washing.

4.It can also be heated to fully dissolve the laundry detergent and give full play to the detergent's round dirt effect. It can form a highly concentrated laundry detergent in the bucket, bringing the ideal washing effect while saving water.

In addition to washing and dehydration, some drum washing machines have functions such as disinfection and sterilization, drying, and upper drainage, which meet the needs of consumers in different regions and living environments.

When the Siemens front-loading washing machine does not enter the water, you can consider the following five solutions:

1.Check the water source: First, make sure that the faucet is open and that the water supply is working. Check if the faucet connection is loose or clogged. If so, repair or replace the connections and make sure the water is smooth.

2.Clean the filter: A drum washing machine is usually equipped with an inlet filter, which can stop impurities from entering the machine. Check that the filter is not clogged with dirt or debris. If so, remove the filter and wash it to make sure it is unobstructed.

3.Check the water level controller: The water level controller is a key component in monitoring the water level of the washing machine. Check the water level controller for damage or malfunction. If there is a problem, the water level controller may need to be replaced to ensure proper water level control.

4.Check the water inlet valve: The water inlet valve is a device that controls the flow of water into the washing machine.

Check that the inlet valve is working properly. You can try testing the valve with a Dominica (multimeter) to see if it is working properly, or try other methods to make sure the valve strap or door is open and allows water to flow into the washing machine.

5.Contact a professional maintenance personnel: If you have tried the above solutions but the problem persists, CCB will contact the Siemens after-sales service center or professional maintenance personnel for inspection and repair.

They will have more in-depth expertise and tools to be able to accurately diagnose problems and make repairs.

Summary: When a Siemens front-loading washing machine is not flooding, first check the water supply source and clean the filter. If the problem persists, check the water level controller and inlet valve. If the problem cannot be solved, it is advisable to seek the help of a professional repairer.

Summary. Siemens drum washing machines are filled with very little water, and in general, the washing machine's water level sensing system is faulty, resulting in the washing machine not being able to properly fill the required water line.

Siemens has learned that the drum washing machine fills very little water, and in general, the water level sensing system of the washing machine is faulty, which leads to the normal filling of the washing machine to the required water line without the state difference.

Siemens has learned that the drum washing machine fills very little water, and in general, the water level sensing system of the washing machine is faulty, which leads to the normal filling of the washing machine to the required water line without the state difference.

Siemens has learned that the drum washing machine fills very little water, and in general, the water level sensing system of the washing machine is faulty, which leads to the normal filling of the washing machine to the required water line without the state difference.

Siemens has learned that the drum washing machine fills very little water, and in general, the water level sensing system of the washing machine is faulty, which leads to the normal filling of the washing machine to the required water line without the state difference.

<> there are many reasons why the Siemens automatic washing machine washing machine does not dehydrate and does not enter the water, first make sure whether your door is closed in place, otherwise it will not work normally; When there is no water ingress, it may be caused by damage to the water inlet solenoid valve or circuit break; There is a certain relationship between non-dehydration and water level switches, water pumps, drain valves, etc., and the above failures may also be the failure of the computer board itself, resulting in many reasons why the Siemens automatic washing machine washing machine is not dehydrated and does not enter the water. When there is no water ingress, it may be caused by damage to the water inlet solenoid valve or circuit break; No dehydration and water level switches, pumps, drain valves, etc. have a certain relationship, the above failures may also be the failure of the computer board itself caused by the rain orchid dance yesterday 23:27 reason: 1

Drain valve malfunction. 2.Blockage of foreign bodies.

Hello, I am inquiring for you, please wait!

The main reason why the washing machine is not running is that the water inlet solenoid valve is bad or the motor is faulty. Here's how to deal with it:

1. If the laundry can only enter the water and does not operate, you can check whether the valve core is rusted, and if it is seriously rusted, the solenoid valve should be replaced. 2. If the motor is damaged, remove the motor, measure whether the motor winding has an open circuit or short circuit fault, and repair the winding or replace the motor if there is. 3. Check whether the starting capacitor of the motor is normal, if the capacitor capacity is not enough, replace the new capacitor.

4. Check whether the motor bearing is damaged; Whether the shaft is rusted or not, you can use the hand rotation test, if it does not move, the bearing should be disassembled to clean or replace the motor.

Hope mine helps you! Have a great day! If you are satisfied, you can give a thumbs up!

Dear, I'm glad to answer for you. The Siemens washing machine has been flooded without washing, and the answer is as follows: 1. The connector is blockedIf the connector of the washing machine is blocked, the water will not stop.

In this case, there is no pressure control water level switch because the water level pressure in the washing machine barrel cannot enter the connector. For this phenomenon, you can unplug the plastic pipe connected to the water level virtual vertical switch, and then blow hard into the bucket until the blockage inside is discharged, and then install the plastic pipe, which can be used normally. 2. Water level switch failureWhen the water level switch of the washing machine fails, this phenomenon will also occur.

For example, the switch is leaking, or the normally open and normally closed contacts are not in good contact. All of this can lead to a constant stream of water in the washing machine. This needs to be checked by a professional.

If it can't be repaired, a new water level switch needs to be replaced. 3. If the adjusting screw on the contact of the water level switch is loose during use, it is easy to lead to the phenomenon of uncontrolled water supply. Because after this screw is loosened, it will change its dynamic and static trigger operation, so that the water level switch is out of control.

If it cannot be adjusted correctly, it is recommended to replace it with a new one. 4. The water level switch of the washing machine is connected to the laundry bucket by the connector. If the connecting part of the water level switch falls off and the water level switch cannot control the water level, then the water supply will not stop.

Just reattach the connector to the laundry tub. 5. If the drain pipe is placed too low, the drain pipe of the drum washing machine has installation height requirements, and if it is placed too low, the water cannot be stored in the barrel, resulting in insufficient water level and water inflow. At this time, we find the instruction manual of the washing machine, and rearrange the washing machine drain pipe as required.

Hope it can help you, look forward to the compliment, thank you dear.