Seagull washing machine e1 fault The master who knows it will talk about it

1. Check whether the drainage pipe is smooth first, if it is smooth, it means yesThe water level sensor is malfunctioningIf the drainage is not smooth, it means that it is blocked.

2. If the drainage is very small or does not drain, confirm firstThe drain pipe is not loweredIf you can't put the drain pipe in a high position, it is easy to have the problem of not draining.

3. If it is not placed too high, check whether the drain pipe is blocked by foreign objects or the water pipe is too bent, if the flow of water is very smallThe drain pipe is blockedFinish.

4. It could also beThe drain valve controller is out of action, the washing machine cannot control the drain valve, resulting in the water cannot be discharged.

Fault**:

1. L--1: Drum washing machine manually selects the amount of clothing**HTD68, BS68Z;

2. L--A: Manual clothing selection of drum washing machine**, HTD68, BS68Z, ASAFE ON when the clothes are basically full; Drum washing machine starts the keypad lock function HTD, BS68;

3. SFE OFF: cancel the keypad lock function of the drum washing machine HTD, BS68;

4. end: indicates the end of the drum washing machine program;

5. E1: Abnormal door lock of drum washing machine HTD, BS68, HDY, D08A, D08, D09, BS58, S06A, 60-HT, BS08 Re-close the door and check the door.

The above content reference: Haier community - drum washing machines always appear E1

It is a problem with the failure of the load cell of Haier drum washing machine.

Here's how to deal with it:

1. Check whether the connection plug from the display board to the driver board is loose, if not, the driver board is broken.

2. Check whether the washing machine is leaking, which causes the line to be damp and cause failure.

3. Check whether the computer board is working properly.

Tip: Wash the washing machine.

Buy some bleach at a supermarket or chemical store, fill the bucket in the washing machine with water, pour about 300 grams of oxidizing bleach, soak for 2 hours, and then choose to start running once.

If the inner bucket is already dirty, you can use this method to wash it several times. The general washing machine only needs about three months to clean and maintain according to this method. If the washing machine itself has a bucket cleaning function, then you can directly follow the bucket cleaning method.

It can also be cleaned with a special washing machine cleaner such as Geko washing machine cleaner. This detergent can completely remove the stubborn dirt and stains of a large amount of anti-anionic active agent accumulated due to long-term use in the inner tank of the washing machine and the interlayer tank of the washing machine.

E1: It is the fault of Haier washing machine**, because the drainage is overtimed, and it is necessary to check whether the drainage pipe is blocked in other faults found in Haier Knowledge Hall**, you can also understand the following F1: Poor contact of the water level sensor.

E2: The lid is not properly covered.

e3: Unbalanced dehydration.

E4: When the water inlet is overtime, check the water pressure and whether the water inlet valve is dirty and blocked.

E5: The water temperature is over 50 degrees.

E6: The sensor is not in good contact or the computer version is faulty.

After understanding the cause of the failure through the Haier washing machine failure, you can take corresponding measures, adjust the poor contact places, dredge and clean the blocked parts, cover the lid, and shake the clothes again to dehydrate if the dehydration is unbalanced, so that some small problems can be solved by yourself, if the fault still exists later, you can only contact Haier after-sales service.

This ** is the drain timeout, mainly check whether the drain valve is blocked, to see if the washing machine drain is smooth, if it is smooth, that is, the water level sensor "some are called pressure switches" failure, if the drainage is not smooth, it is blocked, I hope my answer can help you.

Whether the drain is down or blocked.

This is because the drainage system of the washing machine is faulty, at this time, first check whether the drainage pipe of the washing machine is blocked by something, if so, remove the debris in the drainage pipe, so that the fault code should be automatically eliminated.

If the drain of the washing machine is smooth and the drain pipe is not blocked, then it may be that there is a problem with the water level sensor of the washing machine or the drain valve controller of the washing machine, which makes the washing machine computer program unable to control the drain operation, so that the water in the bucket cannot be discharged.

If none of the above situations are the cause of the E1 fault code of the washing machine, then it is possible that the other hardware of the washing machine is faulty, and then you need to find professional personnel to check and repair.

1. Before washing clothes, be sure to check whether there are still items in the clothes, especially paper items, sharp items and volatile items, if these things are washed in the washing machine with the clothes, it is very likely that Li Pei will cause irreversible damage to the washing machine, and even ** or fire.

2. After the washing machine is used up, be sure to drain the sewage in the bucket, and then it is best to use a dry rag to wipe the water droplets on the inner wall of the washing machine shell and the drum dry.

3. The plug-in board for the power supply of the washing machine must be kept dry, and if there is a leakage, it is necessary to immediately find a special repair personnel to come and repair it.

The failure of Haier washing machine E1 usually refers to the failure of the air sensor or the failure of the water level control board. Here's how to deal with it:

1.Check the washing machine's inlet pipe for blockages or leaks, and if so, clean or replace the inlet pipe.

2.Check that the washing machine's water level sensor is damaged or loose, and if so, need to replace or re-fix it.

3.Check whether the water level control panel of the laundry machine is damaged or malfunctioning, and if so, it needs to be replaced or repaired.

4.If none of the above methods can solve the problem, it is recommended to contact professional maintenance personnel for overhaul and repair.

1. When the washing machine appears E1, it means that the drainage of the washing machine has expired. 2. At this time, the first thing to check is whether the drain pipe of the washing machine is blocked, if there is no problem with the drain pipe, it is likely that there is a problem with the water level sensor. 3. It is recommended to replace the drain pipe in time, it is likely that the drain pipe is blocked or not suitable, too thin or too bent will lead to the occurrence of such conditions.

4. Replace the drain valve in time, it is also possible that the controller of the drain valve has lost its function and the drainage is abnormal. Relevant knowledge popularization: 1. When encountering the failure of household appliances, we must pay attention not to blindly repair and disassemble at will when the situation is unclear, the fault is unknown and you can't deal with it, so that it is likely that not only will not make the situation better, but also increase the maintenance cost and shorten the service life of the machine, resulting in the equipment can not be repaired.

When we can't deal with it, we will contact professional maintenance personnel in time to check and deal with it. When buying household appliances, especially some small accessories of electrical appliances such as remote controls, batteries, water pipes, screws, etc., it is recommended to buy quality assurance and regular products, and do not pay more price and time because of greedy for a small bargain. 2. The drainage pipe of the washing machine is easy to be blocked and poor drainage due to long-term use, so it must be cleaned regularly to prevent malfunction.

The appearance of such ** prompts in the washing machine means that the drainage and storage are faulty, which can be caused by the following reasons. The first thing you can consider is whether the faucet is turned on and whether the water is stopped at home, and you can also consider that the water level sensor is abnormal, malfunctioning, or because of foreign objects blocking the drain outlet. At the same time, it can be considered that the internal motor or computer version of the washing machine is faulty.

The reasons and solutions are as follows:

When this happens, consider checking if the water in your home is out of the water, or if the faucet at the water inlet is open.

If the washing machine is suddenly prompted during operation, it can be considered that the drainage and water storage are abnormal due to the impurities in the washing machine that are blocked by the uncleaned impurities in the washing machine. If this is the case, remove the debris from the drain of the washing machine and it will be ready to go.

When it is judged that it is not a foreign body blockage, but also ensures that the water is sufficient, it can be considered that there is a problem with the water level sensor, and you can choose to disassemble the machine for maintenance and replacement, or directly contact professionals for on-site maintenance.

Of course, the abnormal drainage and storage may also be caused by the failure of the internal motor or computer board of the washing machine. If this is the case, please check the cause of the fault and deal with the source accordingly. If you cannot judge, please contact the after-sales customer service directly for consultation, or apply for after-sales customer service.