Why does Android freeze after a long time, and Apple crashes after a long time?

Updated on technology 2024-02-15
16 answers
  1. Anonymous users2024-02-06

    After about two years of use, it is obvious that the smoothness of the mobile phone is not as smooth as before. This phenomenon used to be more common on Android phones, but in fact, Apple iPhones, which are known for their smoothness, will experience deterioration after a long time, and even have flashbacks, white screens, and other phenomena.

    In fact, the mobile phone becomes stuck, and the most common problem is that there is too much system junk, but the most fundamental reason is that the performance of the hardware cannot keep up with the software requirements, and the hardware here refers to the CPU, GPU, memory, and flash memory. The phone is running slowerThe second reason is that the flash memory performance of mobile phones has declined, which is often referred to as "speed loss".

    Mobile phones used to use the EMMC protocol, but now most of them use UFS, which is faster than EMMC and supports simultaneous reading and writing, so the speed performance is much better. Although there is a big performance gap between the two, they are both flash memory particles, and they both have the commonality that performance will decay over time.

    There are many reasons for the crashback, which can be roughly boiled down to a few points:App compatibility, system memory, and possibly battery issues. App compatibility is easy to understand, and many old devices are prone to compatibility problems with the new system.

    In addition, many old users refuse to update the new system, but the App Store only pushes new versions, which leads to compatibility issues. In the case of Apple devices, battery performance can have a very direct impact on performance.

  2. Anonymous users2024-02-05

    Android will be stuck after a long time because of its memory clearance, many Apple don't know, after all, it hasn't been used.

  3. Anonymous users2024-02-04

    This is a very normal phenomenon, because all kinds of problems will arise over time.

  4. Anonymous users2024-02-03

    This is the problem with the system, which stores a lot of stuff after a long time.

  5. Anonymous users2024-02-02

    Because Apple's system can maximize the capabilities of the hardware.

  6. Anonymous users2024-02-01

    I think this is different from the characteristics of each system, Android and Apple have their own flaws.

  7. Anonymous users2024-01-31

    In fact, there is no relationship between the two of them, the Android system can't completely clean up the background, so a lot of garbage will accumulate in the background, which leads to the slow response of the mobile phone, which is why the mobile phones of the major Android systems have expanded their storage in recent years. Apple's flashback is because Apple does not allow any software to have any problems, for example, a software has several processes, and a process is divided into several threads, as long as one thread has a problem, the software will be forced to close, which is why there is a "flashback". The way Android phones do this is to close the thread and restart it.

  8. Anonymous users2024-01-30

    The use of mobile phones has a lifespan, and time has passed. Of course something will go wrong.

  9. Anonymous users2024-01-29

    Because of system problems, these conditions will occur when the mobile phone is used for a long time.

  10. Anonymous users2024-01-28

    The apples I use never crash.

  11. Anonymous users2024-01-27

    No matter what system of mobile phone, you can change a stainless steel basin.

  12. Anonymous users2024-01-26

    I think it's probably because there is too much garbage in the phone system, which is why this result is caused.

  13. Anonymous users2024-01-25

    I think it's mainly because Android's system is not very good, so it will freeze, but Apple's system will also have problems, so it will crash.

  14. Anonymous users2024-01-24

    This is the case because these applications will degrade in terms of performance and so on over time.

  15. Anonymous users2024-01-23

    After using the Apple mobile phone for a period of time, you may encounter the situation of software flashback, so why does the software crash and what is the reason for the flashback? So how to solve it after the flashback? Here's a detailed explanation for you.

    What is the reason for the flashback of the Apple mobile phone software?

    What is a flashback? It is the phenomenon that when opening an app, there will occasionally flash and then exit to the background, or the dialog box of the login ID will pop up, which we call a flashback. I believe that many friends have encountered this kind of software crash problem.

    This usually happens between the old app and the new system. For example, if you have upgraded to an app that hasn't been updated for a long time or isn't compatible with iOS 8, it's likely that you'll get a crash.

    2. There are many background programs and insufficient memory.

    I have to say that the optimization of iOS is very good, and the smoothness is much better than Android. But Apple's 1GB RAM that hasn't changed for thousands of years is also very tight, especially when you open a lot of programs. At this time, there are too many background programs, and when the memory is insufficient, a crash will occur.

    3. Jailbreak modify files.

    Some jailbroken users may experience app crashes. Especially if you have changed the font, the font library you replaced is incomplete, and the system's app will not be able to open the application according to your font, and it will flash back at this time. Workaround:

    Replace the full and compatible font, or switch back to the original font, or without jailbreaking.

    4. Other flashbacks.

    It may be that this situation is likely to be caused by a third-party assistant, first popularize the principle of this kind of software: first purchase and obtain the installation files of each app according to Apple's process, and then put them on their own servers for users to use their own clients**. It also emulates the communication specifications of iTunes and applies them to the device.

    This makes all apps installed through this type of client have the Apple ID of the client, not the user's usual ID on their device, so even if you enter your own ID, it will not be valid. Therefore, there will be a direct flashback, or the pop-up Apple ID input box will also flash back after entering.

    In this case, after the flashback, you can reinstall the app in the AISI Assistant, or in the "Management-Repair" of the AISI Assistant mobile terminal, you can fix these flashback applications.

  16. Anonymous users2024-01-22

    Flashback, it is also possible that the software needs to be updated.

    The system itself is wrong, the iOS system is not so perfect, and there are often bugs.

    5.The internal hardware failure of the phone may cause the phone to not function properly and cause a crash.

Related questions
8 answers2024-02-15

First correct the LZ error,The hardware of the Android high-end machine is not comparable to the iPhone,But Android's direct spike from the hardware alone, the processor equipped with the highest is no more than 800MHz dual core,And Android,Dual cores abound。 In terms of memory, most of them are 1G for Android and up to 512MB for iPhone. However, due to the great difference in the specifications of Android mobile phones, the screen resolution and hardware configuration are very different, the lowest screen resolution is only 320 240, and the highest has reached 1280 720, and the processor is also from 550MHz to vary, so the adaptation in this regard occupies a lot of system resources (every pixel on the screen is occupying resources), and it also affects the system fluency to a certain extent. >>>More

8 answers2024-02-15

If the wifi signal of the mobile phone is weak or unstable, resulting in frequent drops, it is recommended: >>>More

19 answers2024-02-15

The easiest way,Use one-click root (it is recommended that you still use a third-party flashing tool to crack root,z4root just gives you a method,But it's all the same,That is to crack root,You can try bell pepper,Zhuo master,Brush elf,,360,Mung bean,Deep flash, etc.,,,,If it doesn't work,Try the phone crack,Kingroot,Z4root.): >>>More

5 answers2024-02-15

In fact, the skinning is very simple, install the file from the official ********, and save it in the Sogou SGA directory specified in the SD card. After that, enter the Sogou input method setting program, select "**Settings", and enter the **list. You can click the button behind the name to install, enable, etc.

3 answers2024-02-15

At present, only Motorola in Chinese mainland is the closest to the lollipop system of the native Android, after all, it is Google's own son. >>>More