Where is the Piaget Watch After Sales Service Center?

In fact, it is a common thing for dust to enter the watch dial, which is not very strange, after all, in this environment of life, dust is everywhere. Dust that enters the dial of a watch is usually due to gradual penetration during prolonged wear. If only fine dust is entered, there is no need to clean it without affecting the appearance and use.

However, if it is hair or acrylic fiber and other dust that has a certain length that enters the watch dial, it is necessary to pay attention, because such dust is very likely to cause the operation of the stop movement, it is recommended to go to Room 703 on the 7th floor of Guangzhou Tianhe Wanling Hui to be processed by a professional technician for your watch.

Find a Piaget watch after-sales repair point:

1.Log in to the Piaget Watch Service Center** and ask you about your problem.

2.Specialty stores or brand counters. If you bought your watch from a specialty store or brand counter, it is also possible to go to the place of purchase for repair.

3.In its prime. It has a lot of watch authorizations, and Piaget watches are among them. The method is to log in to Shengshi.com, click on maintenance, select your city, and you can also call ** for detailed consultation.

If you find that IWC is dusted, you must not open the back cover for cleaning without professional guidance, but should seek professional help or send it to a professional repair shop for cleaning, and regularly do waterproof tests and timekeeping accuracy tests to ensure that it works properly. At the same time, we need to be mindful of IWC's exposure to chemicals in our daily lives. And everyone should know the common sense that the waterproof watch is not cold water and hot water, so you must not take the watch to take a bath, avoid water vapor, prevent the waterproof function from becoming worse after entering the water, and then after adjusting the IWC watch, remember to restore the watch head and press it tightly to avoid dust entering.

After finding that the watch is dusty, do not easily open the back cover for cleaning, and send it to a professional place such as after-sales service for cleaning in time, and regularly do waterproof tests and timekeeping accuracy tests to ensure its normal operation. At the same time, it is also important to pay attention to the fact that the watch does not come into contact with chemicals in daily life. The waterproof watch is not cold water or hot water, so don't wear it to take a bath, avoid water vapor to ensure its waterproof effect, and then after adjusting the watch, remember to restore the watch handle and press it tightly to avoid dust entering.

Dust that enters the dial of a watch is usually due to gradual penetration over long periods of wear. If only fine dust is entered, there is no need to clean it without affecting the appearance and use. However, if it is a certain length of dust such as hair or acrylic fibers that enters the dial of the watch, it is necessary to pay attention, because such dust is very likely to cause the movement to stop.

If you have any questions, please click on the avatar to consult**, welcome to call.

If there is a problem with the watch, it is better to send it to the watch after-sales center for maintenance as soon as possible. It's best to go to after-sales service, not to those small repair shops. Not only are they not empowered, but their technology is not professional enough.

The instruments are not very sophisticated. **It's also misreported. It will also cause the watch to be out of warranty.

Piaget's watch is dusted and repaired in Room 1502, Block A, Victoria Plaza, No. 103 Tiyu West Road, Tianhe District, Guangzhou, usually, mechanical Piaget watches will have errors during use, about 30 seconds a day. The error of a quartz watch is about 15 seconds per month. Throughout the process, we must properly understand the usual use of the watch.

In doing so, avoid exposure to magnetic fields, pay proper attention to some of the daily methods of use, and the ability to carry out proper maintenance work in the right way.

1. Scratches on the dial.

If the watch is not very serious, you can first drop a drop or two of water on the dial, and then squeeze a little toothpaste to wipe it, the scratches will disappear, and the dial will be like new. In addition, the choice of toothpaste is also particular, and it is necessary to choose a toothpaste without particles to avoid secondary scratches on the dial.

2. Cleaning of the strap.

Because you often sweat in summer or during sports, the sweat stains on the belt are difficult to clean, and they will produce odors over time. When the strap smells, you can use a toothbrush dipped in an appropriate amount of soapy water to quickly scrub the band, and then wipe it with a slightly damp cloth. To avoid soapy water from penetrating the cortex, the whole process is best completed within 20 seconds.

In addition, you can also apply some leather oil to the strap, which has a protective effect on the strap.

3. The watch is damp.

After many things are damp, the first thing that comes to everyone's mind is to take them to the sun to dry, or use a hair dryer to blow them, these methods are not suitable for watches. If the watch is damp, you can press it on the watch with dry cotton, and then bake it with a 40-watt light bulb for 5 minutes, and all the moisture in the watch can be evaporated. However, if there is a water stain on the inside of the glass or on the dial, it must be treated by a professional institution.

4. Errors are caused by magnetic fields.

For time errors, most of the causes are caused by the magnetic field in life. For example, stereos, electrical appliances, etc., the watch should not be placed next to electrical appliances with high magnetic fields such as stereos and televisions to avoid magnetization. If it is affected, you can find a piece of iron that is not magnetized and has a circle in the middle, and slowly thread the watch through the iron circle, and the magnetism on the watch will be absorbed by the iron; You can also place the watch on a clean iron plate that is not magnetized, so that the magnetism of the watch will gradually disappear after two days.

Hello, glad to answer for you.

Reason for the watch to go into dust:

1. The watch has not been maintained for a long time.

2. There is dust accumulation inside the watch (the watch needs to be maintained) 3. The watch has the phenomenon of dust entering the outside (waterproof testing is required), it is recommended to send it to the after-sales center for testing and repairing the watch! If you have any questions, please call** Please feel free to call.

After the watch is dusted, do not disassemble the back cover for cleaning without professional guidance, you should find professional help or send it to a professional repair shop for cleaning in time, and regularly do waterproof tests and timekeeping accuracy tests to ensure its normal operation.

At the same time, we should also pay attention to our daily life and avoid contact with chemicals.

There are 12 Earl after-sales maintenance stores, the details are as follows:1. Beijing Wangfujing Earl after-sales service center2. Beijing International Trade Earl after-sales service center3. Earl after-sales service center in Shanghai Ganghui Center 2

4. Shanghai Hongyi International Plaza Earl After-sales Service Center

5. Guangzhou Wanling Hui Earl After-sales Service Center6. Earl After-sales Service Center, South East Road, Shenzhen

7. Earl After-sales Service Center of Tianjin Financial Center8. Chengdu Dongyuan Center Earl After-sales Service Center9. Chongqing Rongheng Earl After-sales Service Center10. Nanjing Center Earl After-sales Service Center11. Zhengzhou Earl after-sales service and training center12. Changsha Earl after-sales service center

Since its birth in 1874, Piaget has embraced the spirit of "always doing better than required", bringing savoir-faire and creativity to every creation, while prioritizing creativity and attention to detail, bringing together the craftsmanship of watches and jewelry.

From its beginnings, Piaget focused on the design and production of watch movements, and in the 60s Piaget expanded its expertise with a range of stunning jewellery watches and innovative jewellery collections. Piaget is able to capture the spirit of time, and each watch and jewellery piece is a relentless quest for savoir-faire, driven by boldness, professionalism and imagination.

Slim movement

From 1956 to 1963, Piaget wrote a beautiful chapter in the history of watches with his outstanding watchmaking skills. In 1957, Piaget's watchmaking workshop introduced the famous 9P hand-wound ultra-thin mechanical movement; In 1960, Piaget's watchmakers unveiled the 12P calibre, the thinnest self-winding movement in the world, with a thickness of just millimetres.

The creation of these two movements inspired Piaget's designers to create a number of exquisite and unique watches, a jewelled watch made by Piaget that opened a new page in the history of watches. The intricate parts housed in a slender movement, and in addition to jewellery watches that were both beautiful inside and out, Piaget also offered gold coin watches, ring watches, brooch watches and even cufflink watches.

The above content refers to: Encyclopedia - Earl Table.

Piaget watch after-sales repair service point

Daily maintenance of Piaget watches1. Avoid contact with water, oily substances and cosmetics for a long time.

2. Attention should be paid to avoid violent impacts such as accidental collisions during the use of the watch.

3. Avoid exposing the watch to extreme temperatures, greater than 60 or lower than 0.

4. After cleaning the metal bracelet case with soapy water with a toothbrush, wipe it with a soft cloth and dry it.