iphone7 full coverage tempered film how to paste

First, first buy iphone7 tempered glass film, if you buy Apple 7 with gifts, you don't need to buy it, as shown in the figure below.

Second, first use a special lens cloth to wipe the iphone7 screen, generally buy a tempered glass screen will give a cleaning cloth, the purchased tempered glass film, it comes with 2 cleaning cloths, one is slightly wet, with a clean screen, the other is dry, obviously the former is used to clean the screen, the latter is cleaned, used to blot the screen, as shown in the figure.

Clean your iPhone7 screen.

3. After cleaning the screen, take out the purchased tempered glass film, and then tear off the layer marked 1 on it, and then correspond to the inner surface of the tempered film with the screen, starting from the top, do not press the protective film first, first correspond to the upper and lower positions, and the notches such as the earpiece hole and the home button correspond well to the corresponding position of the tempered film, as shown in the figure below.

Fourth, after the tempered film and the iPhone7 position corresponding, with the help of the three-pack certificate box or other hard cards in the iPhone package, press the tempered film from the top to fit the screen, and keep moving down, the air inside is discharged down, and the fingers of the other hand can slightly lift the bottom film to prevent the bottom from fitting the screen, as shown in the figure below.

5. Finally, you can complete the iphone7 screen film, as shown in the figure below.

Overall, the iPhone 7 screen film is very simple, and everyone can easily learn it. When applying the film, the most important thing is to correspond to the position of the film and the mobile phone screen, which can be referred to the notches such as the earpiece and the home button. For the film is not very good, such as the paste is crooked or there is more space inside, you can tear off the film, clean the screen, and try again.

Wipe the screen with wet wipes (alcohol cotton if possible), wipe it clean, and then wipe the screen with a clean dry cotton cloth to ensure that there can be no dust and water on the screen, and then paste it yourself, it is very easy, the film will be attached by itself. If there are small bubbles after pasting, you can squeeze them out.

1. Use the included wet wipes to wipe the edges and corners of the phone screen, remember to wipe them clean.

2. Then use a soft cloth to dry the water stains on the screen, remember to wipe it dry, otherwise there will be marks.

3. Tear off the protective layer of the tempered film, carefully align the tempered film with some other components such as the front camera, and then aim the top of the tempered film with the top of the mobile phone and gently paste it.

iPhone film, after opening the package, take out the cleaning film, first use wet film to wipe the surface of the screen, and then use dry film to wipe, pay attention not to wipe back and forth repeatedly, it is advisable to use rotary wipe, to ensure that there are no dust particles, take out the tempered film, remove the surface protective film, aim at the screen, especially pay attention to the camera, so that after placing the position, use a lens cloth or scraper in the middle of the screen film, and use force evenly on both sides to squeeze out the bubbles, which can be completed.

Question 1: How to paste the full-screen tempered film on the Apple 6 mobile phone The reasons are as follows:

1, Apple 6 mobile phone block is a curved edge screen, so the edge of the arc can not be filmed;

2. In order to facilitate the installation of the bezel and mobile phone protective case, part of the edge is left.

So the Apple 6 phone film can't completely cover the full screen.

Question 2: How to paste the Apple 6plus full-screen tempered film Peel off the protective film, align the hole, and paste. My sunn anti-blue light tempered film is self-adsorption, just press the middle of the tempered film, and you can remove it and re-paste it if you don't stick it well.

Question 3: How to paste the Apple 6plus full-screen tempered film Peel off the protective film, align it with the hole, and paste it. My sunn anti-blue light tempered film is self-adsorption, just press the middle of the tempered film, and you can remove it and re-paste it if you don't stick it well.

Question 4: How to paste the Apple 6 full-screen tempered film Apple6 plus's screen, because it is a rounded corner design, the tempered film cannot be pasted to the rounded corners, and after the film, the tempered film is smaller than the screen.

Question 5: Can Apple6splus tempered film be pasted all over the screen Yes, now there is a 3D full coverage, the whole is glass, and the arc is made around it, which is the same as Apple's arc edge. You can go to know about EST 3D full coverage tempered film, which is definitely the product you are looking for.

Question 6: Why can't the entire screen be covered with the tempered film of the Apple 6plus? Why can it only be posted on the home screen?

Because you're not buying a tempered glass film with full screen coverage. iphone 6 and 6+ The edge of the screen is curved, and many films can't be covered with full screen, because they can't solve the defects such as fragility, dust, and warping.

Question 7: Is it better to paste a full-screen tempered film on Apple 6 or a non-full-screen film, why? 20 points The full-screen is good-looking, it is said that the full-screen is fragile, and the non-full-screen is not easy to break,,, I pasted the sunn full-screen anti-blue light tempered film, and it hasn't broken for half a year.

Question 8: Is the tempered film of Apple Six not all pasted on the screen, so why is there still a full screen, and what is the difference between the two? The first one is Jian Zheng's messy screen. It's not good to have a full screen! The edge is easy to enter the ash, and the edge of the film is easy to break!

Question 9: Can you still press the phone case after the Apple phone is pasted with a full-screen tempered film Yes, the tempered film is the same as the front film. There is also a post-tempered film. If you want tempered film and mobile phone case, you can go to Sophi General mobile phone accessories to see, my friend opened it.

Question 10: What is the difference between Apple 6 tempered film full screen coverage and no coverage Pro, if you cover it all, you won't see the gap, if you don't cover it, there will be a little gap, the general tempered film covers 99%, you can't see it if you don't look carefully, woka shop, welcome.

1. No film is required.

2. The screen of the Apple mobile phone is scratch-resistant The screen material used in the iPhone mobile phone is Gorilla Glass. Gorilla Glass is an environmentally friendly aluminum-silicon tempered glass produced by Corning in the United States. This glass is bulletproof and is often used for ***, under normal circumstances, unintentional damage will not cause scratches.

As the most unique feature, scratch resistance has always been one of the most challenging items for users, and some users intentionally use a knife or key to scratch the screen to test the scratch resistance of the glass, often after wiping the screen, the scratches are not displayed.

3. The film will reduce the brightness of the screen Even if the AR film (also known as the high transmittance anti-reflection film) with high light transmittance as the selling point, its light transmittance is only about 95%; Other types of phone films will have a greater impact on the brightness of the screen.

4. The film will reduce the touch sensitivity After the film, the screen that originally slid like a fly may become "stuck" and "sliding", reducing the touch experience of the iPhone.

5. The mobile phone with damaged film cannot be guaranteed If the user uses a mobile phone film that has not been certified by Apple's MFI, if the film causes corrosive and other damage, he will not be able to get a warranty from Apple. Apple's technical support representative once said in an interview that the unofficial practice of applying film is particularly popular in China.

The reason why it is so popular in China may be that considering the income level and the price of the iPhone, Chinese users often do not simply regard the iPhone as a digital product, and it is difficult to accept its daily wear and tear and depreciation as a digital product.

If it is a standby machine that is not commonly used, and the economic conditions are not particularly allowed, it can actually not be pasted. If it is for daily use or more typing games, I personally recommend that the frosted film can increase the smoothness of the mobile phone screen and the effect of sweat control, and some people feel that the original screen is the most silky.

The steps for Apple 7 to paste full-screen tempered film are as follows:

Tools needed: Apple 7 mobile phone, tempered film, dust removal sticker, cleaning cloth.

1. Clean the mobile phone screen with a cleaning cloth and dust removal sticker before sticking the film, and wipe it clean from top to bottom.

2. Tear off the tempered film, align the position, and slowly fit, as shown in the figure below.

3. Use the card to scrape the place with bubbles, and the Apple 7 full-screen tempered film is completed.

There are 3 steps to wrap the film:

Step 1: Clean the surface of the mobile phone display to prevent dust.

Step 2: Paste the film; Compare the phone with the film before sticking it and look at the approximate position. Then tear off the film, place it on the side of the phone with the side, and poke the middle to automatically attach the surface.

Step 3: Erase the bubbles; After posting, there will generally be some bubbles or dust entering the country, which will affect the appearance. At this time, wipe the screen with the small towel that comes with it to push the bubbles out; If it is dusty, there will be a dust removal sticker that comes with it.

If you can, just try it a few times. If it is still not smooth, it is recommended to buy ordinary tempered film, and there is also a film artifact on the Internet, which can assist you to stick the film in place at one time.

iPhone does not need film, 1, iPhone7The hardness of the screen does not need film, the screen itself is very wear-resistant, and the effect of film is not great.

2. If you just paste an ordinary film, its quality is too poor, and it does not match the screen of iPhone7.

3. However, the cost of pasting tempered film or explosion-proof film is very high, but it will not have much effect.

4. For iPhone7 and other types of mobile phones, which are high-end products, you can often do some cleaning and maintenance on the mobile phone screen.

5. Nowadays, the screen of smart phones is very large, so many people will give the mobile phone film after buying it, and few people paste the ordinary plastic film now, and most people are pasting the tempered film.

6. For smartphones. If it's a metal body, don't wear a phone case, if it's a glass body, you may also wear a phone case, on the one hand, to prevent the glass from breaking, on the other hand, the glass is too easy to get fingerprints, or if you don't wear a phone case, you will stick a back film.

You can paste a tempered film, and it is not expensive, mainly to protect your beloved iPhone

The half-screen can barely be universal, but the iphone7 film is a little longer, if it is a full-screen tempered film, it can't be universal, and the full-screen film of Apple7 has an extra hole.

In 2012, the latest tempered glass protective film launched in the United States, a high-tech protective film specially designed to protect the screen, is currently the most powerful high-end new product to protect the screen. The thickness of this protective layer is only millimeters, which can completely cover the original screen surface, prevent damage from external forces, scratches, and increase the impact absorption, which is 5 times higher than the standard of PET film. It does not affect the effect of the screen.

On this basis, hackers launched a tempered glass oxygen eye film, which prevents the harm of blue light radiation on the human body on the basis of protecting the mobile phone screen, prevents myopia, and realizes the dual protection of man and machine.

The size is universal, but strictly speaking, the fit effect is not universal. 6S and 6SP Due to the different panel manufacturers and batches, there are many screen corners with a wider amplitude, resulting in 6P tempered film sticking 6SP with four white edges, that is, it is not tightly attached.

The film of 6 is attached to 7, which will cause the automatic adjustment of the brightness of 7 to fail.