Why does iphone7 play king special power hungry

You can set it up in the following way;

a. Turn off the screen to close the app settings, setting method: Select "Settings > Power Saving Management > Protected Background Apps", do not check the apps marked as "High Power Consumption Tasks", and do not select other unwanted background tasks. Turning off the screen after setting it will automatically stop this battery-draining app.

c. Adjust the brightness of the screen, select "Settings > Display > Brightness" in turn, and adjust the value of the progress bar for reducing brightness.

If it consumes electricity, the king is also a large game, and it will waste electricity.

Cause: Running a large app or game.

The brightness of the mobile phone screen is too high, and the lock screen of the mobile phone screen is not set reasonably, which will also cause the mobile phone to consume power and generate heat.

After the screen is lit, some programs run with high consumption, which is also a cause of the heating of the phone.

Some apps need to constantly monitor the status of your internet connection or GPRS. The monitoring of these network connection status will also cause the mobile phone to consume power and generate heat. The mobile phone signal is not good, and the frequent switching of 4G, 3G, and 2G will also cause the temperature of the mobile phone to rise.

Solution: If you encounter your iPhone7 draining battery and getting hot, first see if a large app or game is running, if so, it is recommended to turn it off. Most of today's smartphones will get hot when running large applications or games, and high load will also lead to faster power consumption, which is normal.

If you don't have a large game or app running, and there are not many apps open in the background, iPhone 7 has a hot power loss situation, it is likely that an app and iOS 10 may not have good compatibility, there is an internal dead loop, it is recommended to enter: iPhone 7 Settings - Battery - Low Power Mode, check which apps consume the fastest battery.

Turn off wallpaper zoom and enable animation attenuation.

The screen brightness is adjusted to 30% and below.

Locate or specify several programs.

Turn off background refresh.

If you don't need it, you can turn off email push and software push that you don't use often.

1. The mobile phone system costs electricity. Some versions of the system do consume a lot of power, so it is recommended to update the system and try to solve it.

2. Motherboard leakage. The motherboard leakage is more troublesome, and the power supply will be automatically lost, which must be solved by professional maintenance.

3. Mobile phone setting problems. Check your phone's settings, such as notifying whether the Vertical Attendant feature allows all software to be licensed. Looking at privacy again, whether the location acquisition is all turned on, resulting in the residual noise of the GPS connection and the consumption of power.

Here's how to turn on the power saving mode:

1) Open your phone's [Settings] first, enter the settings menu, find the [Battery] option and turn it on. (as shown below).

2) After entering the battery option, you can see [Low Power Mode], turn on the corresponding switch. (as shown below).

Reasons for fast power consumption:

1. The charged power is virtual electricity, although the mobile phone shows that the power is 100%, so it will soon run out of power when you use it;

2. There are too many software running in the background, and many times we will forget to close the software after opening it, which is also very power-consuming;

3. Turn on some unnecessary functions that are not needed, such as Bluetooth, GPS, etc., which will also speed up the power consumption of the mobile phone;

4. You can also contact Apple after-sales (020 8362 1957): The battery 214*** grid has been started since May 1, and anyone who replaces the mobile phone battery can enjoy the 214 activity. (214 activities; It only takes 214 yuan to replace the battery of the iPhone).

Did you turn on the dots and use the 3D Touch lock screen? This one has a bug, and after a while, you will find that there is no vibration feedback, and then the battery is the same as the power consumption percentage. As long as the small dot is turned off, or turned off and on, it is normal to press the lock screen and have vibration feedback.

1. The standby time of the mobile phone is closely related to the operation you do.

3. It is recommended that you turn off 3G, WiFi, Bluetooth and GPS switches when you don't need them, and develop the habit of cleaning up the background.

4. The screen brightness is set to automatic adjustment, which I believe can meet your normal use.

5. Clean up the programs running in the background of your phone frequently.

Reasons for fast power consumption:

1. The charged power is virtual electricity, although the mobile phone shows that the power is 100%, so it will soon run out of power when you use it;

2. There are too many software running in the background, and many times we will forget to close the software after opening it, which is also very power-consuming;

3. Turn on some unnecessary functions that are not needed, such as Bluetooth, GPS, etc., which will also speed up the power consumption of the mobile phone;

4. Send it for maintenance.