-
This requires more experience in daily driving, usually read more and remember more questions, in fact, driving is a skilled kung fu.
-
You can open it a few more times to increase your experience. After all, many times novices can't completely judge correctly, so when you're unsure, you can ask someone to take a look at it for you. For example, when you are reversing, you can ask you to help you see how far your car is from the obstacle behind you, and whether your car will be scraped or hit.
And when you're driving, just keep a safe distance in front of you, because if your car is moving, someone else's car will move too. So don't worry about crashing into someone else's car. <>
The second way is to install a dash cam in front of the car and a reversing monitor in the back of the car by installing a camera. And the dash cam is better than you can see the position in front of you through the glass. Better judge the distance of the car.
And the reversing monitoring is also very clear to see the rear of the car, when you reverse, the back of the car is easier to see than you go.
And if you want to be very familiar with yourself, then you need to feel it a few more times. After all, practice makes perfect, and those veteran drivers have many years of driving experience, so they have such rich experience.
-
10 o'clock around the wheel alignment method:
Requirements: Natural driving attitude;
Go straight; The hand is held in the direction of 10 points (left) and 15 minutes (right), and the hand points forward;
Judging the position: the ground can be seen near the front of the car when going straight;
Judgment method: When going straight, feel that the position of the left thumb is the center of the left front wheel; It feels like the right thumb position is the center of the right front wheel;
Determine the distance of the vehicle in front.
1. About one meter when you see the upper edge of the bumper of the front car from the lower edge of the windshield;
2. When you see the lower edge of the bumper of the front car (the knee of the person's foot) from the lower edge of the windshield, it is about two meters;
3. About three meters from the lower edge of the windshield when you see the lower edge of the front car and the lower edge of the rear tire (or see the ground);
4. The horizontal line relative to the ground seen on the lower edge of the left rearview mirror is the position of the front of the car.
-
Explain for beginners, if there is a discrepancy, you can explore it yourself:
1.The longitudinal position of the left wheel of the car: the left wheel of the car is in **, the wheel actually has a width, subject to the middle of the wheel, the position of the left wheel from the driver's field of vision, roughly at the line of the left third groove of the hood of the Poussin car, but to look far away, more accurate, in terms of promotion, not Poussin, the left wheel of the car is in the position of the clutch of your left foot, that is, the center of the steering wheel is about ten centimeters to the left, not more than the edge of the steering wheel.
2.30 cm away from the left wheel: the front windshield of the car, the junction with the left frame is called the A-pillar, the glass and the A-pillar are combined with the focal point, combined with the road surface at a distance, at this time exactly 30 cm away from the left wheel.
3.The longitudinal position of the right wheel: This is another very important point, after a long time, the coach said that the right groove line of the hood, after repeated verification, is incorrect, and may also be related to personal sight.
Personal verification, the position of the right wheel is in the middle of the front of the car, and you can also find a reference, such as the right edge of the protrusion of the left wiper of the Poussin car and the position of the left edge of the root of the right wiper.
4.30 cm away from the right wheel: this is another important position, often encountered in exams, but it is also a lot of hard work for the coach, repeated research, it should be in the right front third, but it should be noted that it is not the right groove line, but the groove line is a little left.
5.Front wheel lateral position: This is roughly a little behind the left mirror position, and beginners can understand it as the mirror position.
-
We all know that there are big blind spots when sitting in the cab and looking at the road conditions outside the car, and it is these blind spots that make it impossible for us to accurately judge the position of the body. The easiest and most effective way for beginners is to use markers. Park your car on a safe and straight surface, find one or more straight poles, and place them vertically against the body in the position you want to know, for example, the front left and right corners and the center of the car, and the tire position can also be used.
Then, sit in the driver's seat and place a colored tape or label on the front windshield or instrument panel on the pole. Due to differences in height and sitting posture, as well as the movement of seats, the marks you mark may not apply to other people. However, you should still have a margin when using this method, as your sitting position may not be exactly the same as when you were marked.
The left and right sides of the vehicle can be seen clearly through the rearview mirror. As for the rear, it is recognized as a fatal blind spot, and you can add a rearview mirror to the rear. Another way to judge the approximate way is that when driving in a straight line, the road surface corresponding to the two knees that you naturally relax is the position of the left and right tires of the body.
Finally, I wish you a skilled driver.
-
Are you sure the problem is the sides of the body, not the front and rear? If it's a position on both sides, it's easy to judge! It would be nice to judge by the width of the rearview mirror.
Slowly approaching, the width of the rearview mirror can be passed (the rearview mirror is broken back, which is also a way to pass), hehe. Drive often, be with your car more, and you will naturally feel it, and you will know whether the width on both sides is enough or not. It's the same as the clothes we wear, so we can estimate whether we will get hooked when we cross an obstacle, and think of the car as a piece of clothing that we wear on our body.
-
Who can make perfect, bold and careful, open and feel it.
-
1. The longitudinal position of the left wheel of the car. With the center of the wheel as standard. From the driver's point of view, the position of the left wheel is roughly on the line of the left third of the car's hood, but it is more accurate to look at it from a distance.
2, 30cm from the left wheel. The glass is placed in front of the car, and the junction with the left frame is called the A-pillar. The focus of the glass and the a-pillar is combined to the distance from the road surface, which is 30 cm from the left wheel.
3. The longitudinal position of the right wheel. The position of the right wheel is in the middle of the front of the car, and a reference can also be found, such as the position of the right edge of the protruding end of the left wiper and the left side of the root of the right wiper.
4, 30cm away from the right wheel. This is another important position, which should be in the front third of the right side of the car, but note that it is not the right groove line, but the groove line is a bit off the left side of the dust.
-
1. The wheels also have widths. From the driver's point of view, the position of the left wheel is roughly on the line of the left third of the poussin's hood, but it is more accurate to look at it from a distance. In terms of promotion, if it weren't for Poussin, the car's left wheel would be at the position of your left foot clutch, that is, about ten centimeters to the left of the center of the steering wheel, no more than the edge of the steering wheel.
2. 30 cm from the left wheel: the glass is placed in front of the car, and the junction with the missing or left frame is called the A-pillar. The focus of the glass and the a-pillar is combined to the distance from the road surface, just 30 cm from the left wheel.
3. Longitudinal position of the right wheel: this is a very important point. It should be in the right front third of the car, but note that it is not the right groove line, but the groove line is a little to the left.
4. Front wheel transverse position: This is roughly a little behind the left rearview mirror position, which can be understood by beginners as the rearview mirror position.
5. Lateral position of the rear wheel: The position of the rear wheel in the rearview mirror is roughly on the rear edge of the rear door handle.
-
10 o'clock around the wheel alignment method:
Requirements: Natural driving attitude;
Go straight; The hand is held in the direction of 10 o'clock (left) and 15 minutes (right), and Mu Hui is pointing forward;
Judging the position: the ground can be seen near the front of the car when going straight;
Judgment method: When going straight, feel that the position of the left thumb is the center of the left front wheel; It feels like the right thumb position is the center of the right front wheel;
1. The first type: the positive and negative electrodes of the galvanic battery are determined by the electrode material, the relatively active metal is the negative electrode, and the negative electrode undergoes oxidation reaction; The less reactive metal (or non-metal and some oxide) is the positive electrode, and the positive electrode undergoes a reduction reaction. >>>More
There is no such relationship between a man and a woman, a couple are married from good friends, this kind of I can be sure that the man must like you, otherwise he spends so much effort to please you. I think he has a crush on you. If you don't believe him, you can ask him directly.
If the water temperature exceeds 100 degrees Celsius and the water temperature does not drop, it is a high temperature. Handling methodCheck whether the coolant is missing, check if there is a water leak, check whether the electronic fan is working properly [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
It is necessary to do hearing tests such as ABR, ASSR, OAE, and acoustic impedance first, and judge the type and degree of hearing loss in children according to these results, and select hearing aids suitable for children according to the estimated threshold. After the fitting, it is necessary to do a sound field test and a real ear test to determine whether the hearing aid is effective for children, and whether the effect is good. At the same time, it is also necessary to have regular reviews and follow-ups, and do a good job of children's work.
** The winner or loser of the post-litigation shall be determined by the judge in accordance with the relevant regulations. >>>More