The Guzun watch I just bought today is always slow, what s the matter?

Mechanical watch time is old and slow reason:

Mechanical watches will be magnetized, and the demagnetization method is as follows:

In today's social life, ubiquitous electronic products generate strong or weak magnetic fields around us. Magnetized watches may not see any problems in the short term, but as time goes by, it will become slower and slower.

Various types of permanent magnets are also widely used in electrical appliances, typically speakers and motors, and both magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel. There are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, and when the hairspring is magnetized, the watch will stop immediately. Magnetized watches may not see any problems in the short term, but as time goes by, it will become slower and slower.

How do I demagnetize my watch? The handling of the magnetization of the watch is very simple. Take it to the customer service center or the watch repairer, do not open the cover, and directly use the demagnetizer (or called the degaussing machine, a must for the watch repairer, the market price is only a few hundred yuan) for demagnetization, 2

seconds will allow the watch to return to normal. Nowadays, there are many anti-magnetic watches, but the so-called anti-magnetic watches are not all parts of the watch are anti-magnetic, only the main parts, such as the balance, hairspring, spring and other parts made of anti-magnetic materials. Although it is an anti-magnetic watch, it can only serve a preventive role, so you should avoid placing the watch next to electrical appliances or magnetic objects that generate magnetic fields.

It is best to send the watch repair department to degauss, because there is a special equipment for demagnetization, if it is not convenient to repair away from the watch shop, you can find a piece of iron in the shape of a circle in the middle, without magnetization, stand it on the table, and slowly pass the watch through the iron circle. The magnetization of the watch may go faster, slower, or even stop.

If the watch is always slow for a period of time, it means that the quality of his performance is not good, you can get it to the after-sales service or replace the watch place for a new watch, and change the watch movement to a little bit.

Hello, it may be that there is a problem with the battery of this watch.

If it causes an abnormal operation, it will appear in time.

It's always a slow phenomenon.

Specifically, you can take it to a watch repair shop.

Get a maintenance technician to check it out for you.

It's solved.

If the new watch is a quartz watch is slow, it is out of power or the quality is not good, the mechanical watch depends on how much slower, the error of a day is less than 30 seconds, it is called normal, but it is generally fast and slow.

If the time of the Guzheng watch you just bought today is always slow, it proves that the quality of this watch is problematic, generally speaking, if the mechanical watch has a daily time difference, the difference should be about 30 seconds.

You have to look at whether the watch is a mechanical watch or a quartz watch, and the time of a quartz watch is not slow or fast. If it's a mechanical watch, it's normal to be slow or fast every day. Generally, it will not exceed one minute per day. Just adjust it every day, don't worry.

Hello, if the watch you just bought back is always slow, it means this electronic. There's not so much electricity left, that's why it's slow.

Generally speaking, the watch does have an error, but the error will not exceed two seconds, and the general error is within seconds at home, if it is too much, it may be a battery problem or a mechanical watch problem.

If it is always slow, it may be because of the problem of some corresponding parts, or this setting is like this, then in this case, you can make some corresponding complaints with the official website, and they will also give you some corresponding methods.

If the time teacher is slow, it may be that his battery has aged, which is why it will lead to this, or that the quality of his movement is not good.

It means that there must be something wrong with your watch, Guzun watch, the time is not right, it is possible that your watch is a goods, and there may be a problem with the watch movement.

It may also be that he has used it for a long time, I think if the watch you just bought is not very good, you can return it, especially if it is easier to return it online, and then it is easy to return it in a physical store.

The guzheng you just bought today, the watch time is always slow, what's going on?

That's because he hasn't adjusted the function well, and the quality of the lawyer hasn't completely adjusted him to the most accurate.

The watch you just bought is slowing down, it may be a problem inside the watch, you can take it to the repair shop to check it.

Hello, your watch is a bit of a problem, if the time will be very slow, you can take it and replace it with a new one, so it's better.

Since I just bought it, I went to the store or asked the customer service what was going on, and if it didn't work, I would change it, and I couldn't spend money to buy a defective product.

If you just bought a new watch today, there will be a jam, I suggest that you still have to go to the counter to communicate with the customer service to see if you can replace the watch.

This table may be washed and oiled for a long time, and you can find the merchant to return it.

I just bought the Guzun watch today, and the time is always slow, what's going on? Actually, you have to see if there is a problem with your tone? If there is indeed a problem. You can go directly to them for an exchange.

Then you should go to the place that sells the watch to consult, it should be the quality of the watch.

The time of the Guzun watch I just bought today is always slow, and I have to go to the store to let people take a look, and ask the person who sells the watch to adjust it, or what kind of problem.

If you just bought it, it is slow and inaccurate, then you should contact customer service in time and you can return or exchange it.

If you find that the watch you just bought is not accurate, you can quickly replace it, and it can generally be replaced for you.

If the watch you just bought is not on time, I think it's better to take it to the store and ask him to check it for you and change it.

If you have just bought a Guzun watch, if the time is always slow, you should go to the specialty store immediately. Return it to him.

Is that not **, you'd better ask, or don't retreat.

The time of the Guzhen watch I just bought today is always slow, what's going on, because you uh adjust it, or um, after picking it up, he will.

1. The day of the week and the calendar cannot be adjusted from 21 o'clock to 3 o'clock in the morning, which hurts the watch. The calendar is gear-driven, and it is generally slow.

2. The watch is different from the quartz watch, the date and day of the quartz watch are jumped at zero o'clock, and this accuracy only appears in the electronic watch. Analog watches are not as precise and may be pushed forward or delayed, this is because the date and day of the week are pushed by a wheel.

3. If you skip words at the same time, the driving force is very demanding. Therefore, the change of the week will be skipped within half to a few hours after the change of the date.

4. If you encounter the date of the watch, it will jump at 11 o'clock at noon, 12 o'clock and 1 o'clock in the afternoon. Don't be in a hurry, just turn the clock hand around and readjust the date.

5. The adjustment button in the middle has two gears, the first gear is to adjust the date, and the second gear is to adjust the time. When adjusting the first gear, rotate backward to adjust the date, and rotate forward to adjust the week. If the watch itself does not display the day of the week, there is no need to set the day of the week.

The method of adjustment: pull out the first gear, directly to the front, take today as an example: adjust to the 29th, and then pull out the second gear when tuning, adjust a circle, the calendar will jump to the 30th, if it is the afternoon, then adjust one more circle, that's it.

Pull out the first gear, directly to the front, take today as an example: tune to the 29th, and then pull out the second gear when the tune, tune around, the calendar will jump to the 30th, if it's in the afternoon, then tune one more circle, that's it.

There are several main reasons:

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

There are three main reasons why mechanical watches are inaccurate.

1.Watch magnetization: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate.

After being magnetized, the watch may stop, slow, or fast. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to restore it to normal.

2.Lack of maintenance: If the watch lacks maintenance, it will lead to wear and tear of parts, dry up the sludge, affect the normal running time of the watch, and make the watch appear fast and slow.

3.Mechanical failures: Mechanical failures such as watch balance spring failures, escapement failures, and component slips can cause the watch to be fast and slow.

Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc. Quartz watches are generally very accurate and less prone to time failures. In the case of adequate maintenance, it is more likely to be fast and slow, which is more related to the failure of the circuit board, or the poor contact of a certain part.

The common factors that lead to the inaccuracy of the watch time are that the watch is magnetized and strongly impacted, the hairspring is deformed, or the fast and slow hand is displaced, and the demagnetization or adjustment of the fast and slow hand is solved by the watch repair shop.