How a vacuum cleaner filters dust

There will be a filter configuration, such as a filter, a hape filter, or a filter cotton. I was a little curious about the dust bag, and then I inquired with others, and it turned out that the cloth bag was not an ordinary cloth bag, the inside was soft and could breathe air. That's it.

There is a filter inside for filtration, and the principle of the vacuum cleaner is introduced in detail.

The vacuum cleaner is mainly composed of three parts: dust collection, dust collection and dust filtration, which generally includes a string commutator motor, a centrifugal fan, a dust filter (bag) and a dust collection accessory. Generally, the power of vacuum cleaners is 400-1000w or higher, and the power of portable vacuum cleaners is generally 250w and below.

The vacuum cleaner removes dust, mainly because it has an electric exhaust fan mounted on its "head". There is a wind impeller on the rotating shaft of the exhaust fan, after the power is on, the exhaust fan will produce extremely strong suction and pressure at a speed of 500 revolutions per second, under the action of suction and pressure, the air is discharged at high speed, and the air of the dust collection part at the front end of the fan continuously replenishes the air in the fan, resulting in an instantaneous vacuum inside the vacuum cleaner, and the external atmospheric pressure forms a negative pressure brush, long pipe, elbow, hose, hose joint into the dust bag, dust and other debris are trapped in the dust bag, and the air is purified by the filter sheet, and is discharged from the tail of the body. Because the gas is heated as it passes through the motor, the gas discharged from the tail of the vacuum cleaner is hot.

The vacuum cleaner's vacuum bin is equipped with a dust collection box, and the dirt is left in the dust box, and when the box is full, it can be taken out and cleaned with water. The vacuum cleaner is equipped with different parts to complete different cleaning tasks, such as a floor brush to clean the floor, a flat brush to clean sofa tops, bed sheets, curtains, etc., and a small nozzle to remove dust in small corners and dirt in some household appliances.

Dust passes through the fan.

Something is passed through after entering. What treatment was done to separate the dust and air. This allows the dust to be stored. Map of exhaust air.

This data is ** on the map, and the final result is subject to the latest data on the map.

1. Open the dust storage box of the vacuum cleaner.

2. Pull away the protruding place with your hand and take out the obstruction, and the dust sponge and filter paper will be taken out.

3. At this time, you can see a large amount of dust inside: large pieces of dust can be torn off and rubbed out of the dust in the sponge (you can put it in water to clean, but you can't rub it too much, and then dry the water), and the filter paper behind the sponge can be knocked out on the ground hard, and the dust inside the filter paper can be knocked out.

4. Finally, don't forget to clean the dust on the side of the dust storage box, this place can be wiped dry with a rag or swept with a brush.

Personally, I think it's okay to sweep the dust, but it's unlikely to be completely clean. With the development of society and the continuous improvement of people's living standards, vacuum cleaners have gradually entered every household. As a new era of scientific and technological products, vacuum cleaners have brought a lot of convenience to people, but at the same time, there are some deficiencies in providing convenience.

First of all, let's take a brief look at the working principle of the vacuum cleaner, after opening the vacuum cleaner, the motor rotates at a speed of 500 revolutions per second, under the action of suction and pressure, the air is discharged at high speed through the inlet and outlet of the air flow, and the other end produces a strong suction outlet to suck in garbage and dust, the air of the dust removal part at the front end of the vacuum cleaner is continuously supplemented to the fan, and an instantaneous vacuum is generated inside the vacuum cleaner, forming a negative pressure difference with the external atmospheric pressure, under the action of this pressure difference, the air containing dust is inhaled, Dust and some debris enter the dust removal filter bag in turn through the joints such as carpet brushes, long connecting pipes, elbows, hoses, etc., and these dust and debris will remain in the dust bag. But for some corners of the dust, the vacuum cleaner does not have enough power to suck it out, so it cannot be cleaned up.

The second is that even advanced vacuum cleaners cannot absorb the tiny dust on the ground. For example, when you look at a clean object and touch the small white dust on your hands (the vacuum cleaner can't absorb it) The main function of a vacuum cleaner is to suck up those fine particles and residues, a vacuum cleaner can help you pick up the change under the bed, but the effect is average, in addition, most vacuum cleaners need to be plugged into a fixed plug to turn on the power, many vacuum cleaners don't have long enough wires, if the area of the home is large, you need to move the vacuum cleaner frequently4Vacuum cleaners usually consume a lot of electricity and make a lot of noise when in use.

Finally, the structure of the vacuum cleaner is not good enough, and it cannot enter these places at will, and these places are often the most difficult to clean, and they may not be able to be cleaned manually. If the vacuum cleaner has a variety of shapes, then for many hidden corners that cannot be seen by the naked eye, the vacuum cleaner can quickly go there to clean, which solves the problem that plagues people.

It's true. The vacuum cleaner is still very convenient. But he needs you to go to every corner by hand so that you can clean it. But his vacuuming capacity is very impressive.

I don't think it's possible to completely remove the dust, mainly because there will be some dust stuck to the ground, which the vacuum cleaner can't suck away.

I think of course it is, and a high-powered vacuum cleaner can do that.

The vacuum cleaner filter element is a very important part of the household vacuum cleaner, without which the vacuum cleaner can not work normally, the filter element of the vacuum cleaner has been used for a long time, and there will be a lot of dust on it that affects the normal operation of the household vacuum cleaner, at this time we need to clean it carefully.

How to clean the vacuum cleaner filter, follow me. First, we can directly clean it with a clean brush, and sweep the dust on it with a brush, which is suitable for daily cleaning and can not be cleaned with clean water.

The second is that you can flush the vacuum cleaner filter, and the general vacuum cleaner filter can be flushed directly, but it is best to read the instruction manual to avoid unnecessary loss. Then we rinse directly with running water, about once every two to four months.

The third is that it must be air-dried before it can be reassembled, otherwise if the motor is wet, it may turn on the self-protection mode and stop working.

It is very important to choose a household vacuum cleaner that is easy to clean, just like a finger butler vacuum cleaner, the filter element is in the dust cup, and you can unscrew it directly. The cleaning can also be directly carried out with running water, and the sponge can be replaced to ensure the cleaning efficiency.

How to clean the vacuum cleaner filter is very simple, and we do a good job of daily maintenance, so that the vacuum cleaner can help us work better and longer.

1. In the process of using the vacuum cleaner, it is generally necessary to pay attention to the dirtiness of the vacuum cleaner filter element. After the vacuum cleaner has been used for a long time, the position of the vacuum cleaner filter element is generally easy to accumulate a lot of dust and dirt, if it is not cleaned up in time, it is easy to cause the vacuum cleaner's dust collection effect to deteriorate, or cause the vacuum cleaner's dust collection speed to slow down, etc.

2. The vacuum cleaner filter element generally needs to be cleaned frequently, but the specific cleaning method can be decided according to the actual dirtiness of the vacuum cleaner filter element. If there is less dirt accumulated on the vacuum cleaner filter, then just use a brush to clean the dirt on the vacuum cleaner filter.

3. If there is a lot of dirt accumulated on the vacuum cleaner filter element, then you need to remove the vacuum cleaner filter element first, and then rinse it with water. Under normal circumstances, the vacuum cleaner filter element cannot be rinsed with water frequently, and generally can only be rinsed once every four months.

4. When the vacuum cleaner filter element is rinsed, it should be allowed to dry by itself, and it can be installed back for use after drying. If the filter element of the vacuum cleaner is not completely dry, then it must not be used, otherwise it is easy to cause damage to the motor of the vacuum cleaner and make the vacuum cleaner unable to work normally.

5. When disassembling the filter element of the vacuum cleaner, you must be careful and disassemble it according to the correct disassembly steps, if the disassembly is improper, it will easily cause damage to the body of the vacuum cleaner, making the vacuum cleaner unable to work normally, and bringing unnecessary trouble to the user.

That's all there is to say, either go to the compressed air and spray it more troublesomely, or buy one that's easy to clean.

The emergence of vacuum cleaners has solved the problem of daily sweeping and cleaning of many friends. In fact, the vacuum cleaner is frequently in contact with dust and garbage, and it must be cleaned up in time to avoid the chaos of the whole family. And when we clean the dust of the vacuum cleaner, we can deal with the appearance of the vacuum cleaner.

01 First of all, when cleaning the appearance of the vacuum cleaner, you can directly use a certain amount of soapy water to scrub the vacuum cleaner. It is recommended that friends do not use organic solvents when scrubbing the vacuum cleaner.

02 Because in life, if you directly use organic solvents to scrub, it may cause the appearance of the vacuum cleaner to crack, fade, and peel off the paint. However, friends cannot directly use steel wool balls and other hard objects for cleaning.

03 Secondly, you need to pay attention to the cleaning of the filter, generally use filter paper to clean the filter, of course, you can also use a soft brush to clean the dust on the filter paper.

04 For many friends, when using the vacuum cleaner, it may cause the exhaust breath of the vacuum cleaner to smell bad. Generally, cotton dipped in lemon juice is used to put it in the trash can of the vacuum cleaner, which can effectively remove the odor of the vacuum cleaner.

How do you clean a vacuum cleaner filter? Many friends have a vacuum cleaner, after a long time, the filter will become dirty, then cleaning becomes particularly important, and then I will introduce you to the cleaning method of the vacuum cleaner filter.

1. Unplug the power supply of the vacuum cleaner first, so that the machine is in a state of electromechanical separation.

2. Open the dust bag of the vacuum cleaner and gently pull out the filter.

3. Rinse the filter with clean water or replace it with a new one.

4. Place the cleaned filter in a cool, ventilated place to dry.

5. Take out the air filter from the back of the vacuum cleaner, replace it with a new one or clean it, and finally install it back in place.

I have introduced the cleaning method of the vacuum cleaner filter here, I believe that you have a certain understanding of the cleaning method of the vacuum cleaner filter after reading the above article, and I hope it can help you.