Has anyone ever used a Simin Ares graphics card cooler?

You can adjust the number of revolutions of the fan in the CCC, of course, you can also modify the BIOS and flash it to the graphics card, so that you can also adjust the number of revolutions of the fan at different temperatures.

Comrade, the barbecue grill is good, it depends on how to make it, believe in the arctic silver or above on your silicone grease.

In addition, the room temperature is 25, your graphics card is 45, and at this temperature, are you talking about the highest video memory unit or **, surface? Full load control at 63, I personally think this performance is already good, the speed below 60 is only 14%, comrade!

Multiple air ducts may have crosstalk, post a picture to see?

You can adjust the speed. You've bought a barbecue, and in order to be worthy of it, you should go to the mainstream forums of DIYER and OCER (if I'm talking nonsense, you can just ignore it).

What is the fan speed when you look at 40%?

With such speed control, you need both silence and cooling effect, in addition to recommending you to replace the high-end and larger size fan that can produce more air volume and at the same time better control noise, you can only recommend water cooling, and you also need to make the cooling radiator of water cooling DIY farther.

Actually, that's it, what else? If you want to spend a lot of money and see the effect, you can buy a set of water cooling system, motherboard, graphics card, processor, and get it at one time, if it is fanless water cooling, then it is still silent.

It can only be said that it is average! I've used it, and it feels so-so! It is recommended that you choose brand-name products with a good reputation!

This kind of comparison is more expensive, it is better to change to Zotac.

The air volume seems to be a 46 (ares), a 66 (god wing) In comparison, the V6000 may be a little more noisy, but it is said that the fan is 92*92*25, and the ARES 90*90*25, the speed difference between the high and low speeds of the ARES is relatively large, that is, the adjustment is stronger, and the maximum speed may be about the same

But in terms of weight, the V6000 is a lot heavier It is said that it is a copper bottom V6000 six heat pipes, although the design is too decent, it looks like the heat pipes of the ares are better, but it seems to be a little thin

How much worse is it Who knows who will buy two at once anyway But the Shenyi V6000 is generally more expensive than the Ares (100 yuan?) However, the V6000 does not emphasize that the pure copper heat pipe only says the pure copper base, and the Ares just says that both are pure copper

But what a big difference

Distressed, I also want to change the graphics card heatsink In fact, can I just buy a small fan, it's too cheap

6850 Generally used overclocking 3 Aegean popularized can. If the ambient temperature is high, consider Caribbean Sea Caribbean Supreme.

Or the double breasts of the Swiss AC This one is very strong. There is also a barbecue grill.

Simin's Ares can too.

My own experience, do-it-yourself change. The special fan for graphics cards is generally 4cm, and some are subject to special-shaped heatsinks, and it is difficult to buy a similar match.

In fact, the fan is used to dissipate heat, buy a 6cm, 7cm, 8cm fan, and tie it to the heat sink with screws, wires, and ropes. It works well and is cheap.

The chassis width in the can be overclocked with the Tri Caribbean Ultra.

Or the Black Sea.

This is too expensive... I'd rather use an AC barbecue...

TT is the most grinding, but what do you mean by graphics card cooler? Is it a radiator that blows the ridge of the graphics card blindly? Graphics cards all have their own fans. The front fan I use is cool, and the rear is Fengshen, and TT is actually very good.

HD 4750 is more than gone, what model of yours?

The kind you are talking about is the original fan of Lanbao and Dilan Hengjin.

Plugged copper and aluminum.

The effect is average. In Chengdu, using a pure copper radiator with a large fan is the king.