How do I reinstall my computer after reinstalling it?

1. After you find the executable file, right-click to send the desktop shortcut and try again.

2. Go to the next registry file on the Internet and pay attention to the version.

Open the software and click on the production system, select the system we want, and click to start the production.

2.Click OK.

3.Wait for the U disk to be made, and then we can pull out the U disk.

4.Restart the computer and plug in the USB flash drive, quickly press F12 when booting up, select the USB flash drive in the boot menu, enter the PE system and continue the installation.

5.Wait for the installation of the installation tool to be completed, and click Restart Now.

How can the computer reinstall the system.

This is not clear in a few words.,I guess you can't understand what you say upstairs.,It's best to find someone who understands the computer to help you reinstall.,You haven't installed it if you install it yourself for the first time, it may be very troublesome and error.。。。

Now it's very simple to reinstall the system, first buy a system disk, it's best to buy it at the place where you sell and assemble the computer, and you want to drive the whole one. Put the disk into the optical drive, start the computer and follow the prompts to install it (Dell, IBM may need to press F12). Usually, you can press the up and down buttons to move the mouse over the selection item and press enter, or press 1 (a) to enter.

Then leave it alone, wait a few minutes and it'll be OK, easy.

The specific tutorial shares the system package, just follow the steps to install it.

To put it simply, it's easy to take a disc to reload, and it's very simple to follow the prompts, but back up the drivers on your machine before reinstalling. You can search for it, see for yourself, figure it out, and you'll understand it right away.

There's a fool's version (that's ghost's),Put it on the plate,Browse the files in the disc,Open the gho image installer,Click yes,Click yes after copying,Then restart,Automatic installation。

In addition, before installation, you should back up the important files, networks, and drivers of the C drive.

In the BIOS setting, boot from the CD-ROM drive, and put an installation disk in the CD-ROM drive to boot.

Select the startup disk C drive.

Allocate space as a matter of course...

Then follow the guide step by step...

It's that easy to install the system!

It's better to search for your own hands than to wait for someone else's answer. In fact, one sentence is finished: throw the system disk in, the machine will install itself, close your eyes and press enter, the installation time depends on the speed of your machine.

Prepare the system disk and drive disk and reinstall them as follows:

1. Optical drive starts.

Award Bion setting.

Restart, press del to enter the BIOS Award interface, use the arrow keys in the function key area to select the second line of "BIOS Features Setup", press enter to enter the BIOS Features Setup interface, find the sixth line "Boot Sequence", and use PGUP or PGDN to turn the page to replace the A,C displayed on the right of it with CDROM,C,A. Press esc, press f10, and hit y to save and exit.

or Award BIOS settings.

Reboot, press Del to enter the BIOS Settings interface, find Advanced BIOS Features (Advanced BIOS Parameter Settings), press Enter to enter the Advanced BIOS Features interface, use the keyboard D-pad to select the First Boot Device, use PGUP or PGDN to turn the page to change the HDD-O on the right to CDROM (CD-ROM boot), press ESC, press F10, and then hit Y to save and exit.

2. Insert the XP installation disc into the optical drive, restart it, and see the CD ...... appear at the bottom of the screenWhen the word is written, press the enter key in time, otherwise the computer will skip the light start from the hard disk. After the XP system disk is opened, it is necessary to start installing the program, copy the file, load the hardware driver and enter the Chinese interface of the installation wizard.

Please note that as long as you follow the guided installation requirements, the installation task can be successfully completed.

The following are roughly as follows: XP system protocol, target disk, formatted partition, copy file, enter serial number and computer information, press enter, etc., and enter the XP desktop after restarting.

3. At this time, the desktop only has the ** station shortcut icon and taskbar, right-click on the desktop, select "Properties" - display "- Customize the desktop" item, check "My computer", "Online neighbors" and so on - "OK", return to the desktop.

4. Try to run it to see if it is normal, if there is no sound or the display is not normal, right-click "My Computer", select "Properties" - Hardware - "Device Manager" - the option that appears in front of the yellow question mark or exclamation mark represents the hardware that is not recognized and has not installed the driver, right-click and select "Reinstall Driver", put in the corresponding driver CD, select "Automatic Installation", the system will automatically identify the corresponding driver and complete the installation.

Use the above method until all the previous "question marks" disappear. The drivers that need to be installed generally include graphics cards, sound cards, network cards, cats and other drivers.

5. Set up the network connection, start Connect to - show all connections - right-click the local connection - Properties - set in the open dialog box, and generally set my broadband connection to automatic.

6. Install anti-virus software and commonly used application software.

Too much computer junk, too many running programs or more rogue software is also a reason for Super Bunny (free to clean up computer junk).

Malware Cleaner (Free Cleanup of PC Rogue Software).

If the machine is poisoned, you don't necessarily have to reinstall the system, if you don't have to die of busyness. The next better antivirus, Ewido Anti-Spyware, is also a good anti-Trojan. If the machine is stuck, disable some unused services first.

Start --Run--msconfig --Start Disable unwanted startup services, or open Task Manager and shut down some memory-intensive processes. If you really reinstall the system, I want to have an installation disk, and it will generally follow the default path.

Buy one"Tomato Garden"The system disk, there is an automatic installation system, and those who recognize words will be installed.

If you have a CD, you can install it directly, and if you don't have it, you can install it from the next XP on the Internet and from the hard disk.

After entering the DOS, FOMRAT C:

Once the format is complete, start it with the CD-ROM, then press Next and fill in the information. It's simple.

First of all, you need to enter the pure DOS to reformat the hard disk, and the method of entering the pure DOS can be a self-booting system CD or a system floppy disk. Before using them to enter, you need to set the boot order in the BIOS.

After entering, format your partition with format c:.

Then go to the disc directory, run the installation file, and follow the wizard step by step.

Enter dos formatting, format c:s

Put in the installation disk, set up to boot from the disc, and the next step is good.

Agree to "change it to optical drive boot in the BIOS first, put it in the system disk, and follow the prompts to operate".

If you install 2000 XP, find a self-starting installation CD, set it as a CD boot in the BIOS, and the Chinese interface will be followed.

Hang the optical drive and boot it with a disc, format c: q

Install the system with the system mounting disk.

It's simple.,Buy a fully automatic XP disk and put it in the light area.,Just look at the prompt.。。。

If you can repair it, you can repair it, and it is better not to use the grid.

Big brother, please make it clear that there are a lot of operating systems?

Now, it's also very convenient to go to the next system on the Internet, and now install a system, and when you look at it, he prompts that elementary school students will also install it.

It's hard to say this, it depends on what plate you use, but it's much the same, and there will be instructions on the plate to see yourself first, and then ask 1