Ace fast forward! 100 CPU usage! How to fix it?

Just go to the repair point and clean the dust inside......

70° is not very high, it should not be a fan problem. The main thing should be the CPU issue. You can clear the fan.

Reinstall the system and look at the fan speed.

1.Maybe the fan can't get heat, so it's best to change it to another one (I've also had this situation and it will return to normal after changing the fan): 2Fallen into a Trojan horse or something: 3There may be some drivers who are not very modest, or install a new system.

Remove the CPU and then clean up the dust in the application of silicone OK What a simple problem You said that the software is no problem The system is no problem That's the hardware problem Remove it yourself and clean it up Then apply some silicone between the radiator and the CPU It's OK It's because your temperature is too high So when the machine is just turned on, you can use it Slowly run for a while and it will get more and more stuck But even if it's high, you shouldn't use 100% Look at which CPU is more consumed in the process Clean up the hardware first and then check the software in it The driver of the graphics card must be installed correctly, and it will be useful to give extra points, hehe.

Is the fan speed too low? What is the configuration of the computer?

One is to see if the CPU fan is too dusty, and remove the dust. The other is to change to a more windy CPU fan, and the third is to add a case fan, which can increase the air circulation in the case.

It's a virus, and if you don't have anything to do with the installation system, send it for repair.

system idle process"idle in means "idle".

system idle process"That is, the "system idle process".

The more cup time the system idle process takes, the more idle your computer is.

When the CPU usage is high, there are several things that can be done:

1. Right-click on the taskbar, then click on Task Manager, click Processes, and close the programs that consume high resources.

2. It may be computer poisoning, computer antivirus, it is recommended to disinfect in safe mode.

3. Open less programs that consume more CPU resources.

Hello! Thank you for your continued support and attention to ASUS products, I'm Elly and I'm going to be at your service today. In view of the problems you encounter, the following suggestions are given, and I hope your problems can be solved smoothly:

1.Turn off IE Protected Mode: Click the "Tools" button of IE Browser Click on "Internet Options" Click on the "Security" tab Uncheck the checkbox in front of "Start Protected Mode", and then reopen IE Browser; 2.

Reset IE: Click the "Tools" button of the Internet Explorer Click on "Internet Options" Advanced "Reset" "Reset" OK; 3.Check if your computer is poisoned:

Press the F8 key before booting into the Windows system, select to enter the safe mode, and use the antivirus software equipped with the latest virus database to check the virus to eliminate the factors of computer virus interference. 4.Still can't do it, please back up your data and restore the operating system There are two ways to restore the pre-installed Vista model to the factory state, please back up the data before the system is restored.

Method. 1. Press the F9 key when the ASUS screen appears at boot, and then pass"Progress bar"、"Launch the interface"A prompt will appear asking you to select the first option (Recover Windows to First Partition Only) so that you can restore the system to the first partition of the hard drive. After that, please press twice"next"and select it later"finish"After that, the system starts the recovery process. Method.

2. Put the system recovery disc (recovery ***) into the optical drive, restart the computer, press esc when the ASUS screen appears at boot, select the disc to start, and then please refer to the steps in the first article. When the recovery is complete, you will be prompted to insert the driver CD, so please insert the driver CD to install the driver. Description of the options、In"select the appropriate option below"page, with three options, explained below:

windows to first partition only. windows to entire hd. windows to entire hd with 2 partition.

Its functions are: aOnly the system is restored to the first partition, the other partitions remain unchanged b

Divide the entire hard disk into a partition and restore the system to this partition cDivide the entire hard drive into two partitions and restore the system to the first partition Note: To ensure data security, please back up all important data of the partition before recovering any project to avoid losses caused by unpredictable errors.

We apologize for any inconvenience caused.

Check whether the rated power of the power supply reaches 300W

Check whether the memory of the graphics card is plugged in or the gold finger is oxidized.

Remove the graphics card and compare the boot time and the operation of the related software**What is the difference between it and before?

Have you checked the running frequency of the CPU, will it be used to reduce the frequency, after the BIOS is modified, this situation may be very large, and 50% of the usage is normal, your CPU frequency is not high, so there is no big difference in such a high occupancy. The phenomenon of the outgoing card is likely to be that your driver installation is not suitable, XP came out in 2002, when there was no desktop-level dual-core processor, therefore, in order to perfectly support dual-core, Intel and AMD have issued CPU drivers for their own CPUs, and Microsoft itself has issued a patch to correct dual-core. In addition, other drivers are also very important, such as the motherboard chipset driver, which directly affects the read speed between the hard disk and the memory, and the graphics card driver directly affects the performance of the graphics card.

It is recommended that you complete the installation of all drivers and test again.

I didn't see what brand the graphics card was, so I can't make a conclusion!!

If the graphics card is sapphire, there is a high probability that there will be a conflict.

But it can also be a driver problem.

Does the machine have an integrated graphics card, if so, please go to the BIOS and turn it off, if it is still the same problem after turning it off, consider the compatibility problem first, and consider the power supply problem second.

It's very irresponsible to recommend answers!

Your e2160 is a 07-year-old U, with a very low frequency and poor processing power.

NVIDIA GeForce 8600 ATI HD3000 series and above.

Your u is fully loaded, which is the situation that causes your card to be stuck and can't even open the web page when you play a single machine.

Your boot time is longer because there are more startup items, just disable some unnecessary startup items.

Go upgrade your CPU.

Driver questions in Driver Genie or the official website next.

Is there a lot of stuff on the C drive? It's either the virus that's doing the trick! My family's is also Take it to repair the computer, then you can kill the poison!