Very urgent, CPU usage problem!!

It's okay.,100% means that your CPU computing speed is not enough.,It's equivalent to running at full load.,It won't burn out.,If you run this game, it's going to be like this.,It is recommended that your computer can be replaced.。

It won't burn to 100%, he has temperature protection! And 100% is fine!

You'd better install a 360 security guard, click Advanced, and then click Start, and disable everything that shouldn't be used in it (only antivirus and ctfmon)!

Then you take a look!

That's because the CPU can't keep up with the computing speed!

Now the motherboard BIOS comes with an auto-shutdown function, 1

If the CPU temperature is too high, it will automatically shut down!

Rest assured to play.,Absolutely not.,The high CPU occupancy is caused by the number of games and other software running in your system.,And your low configuration is caused.,But burning the CPU is a hardware thing.,As long as your fan rotates, it won't burn.。

CPU usage is 100%?If you use it like this for a long time, it will shorten the life of the CPU.

If your CPU usage is high without opening any software, it is estimated that your system is poisoned.

It is recommended to reinstall the system and see if the game will have the above situation when running the dungeon.

Yes....It is recommended to buy a TT fan to cool down!

That's because your computer has too many things in it, which is hindering the speed of your computer, just disable some things that you don't use.

Running at full load The CPU power consumption of the P4 series is high and will not affect the CPU.

The optimization of online games is poor, so I have to explain it like this, let's change to dual-core.

The CPU uses multi-threading to transmit and process data, that is, the number of bits is different, so it is divided into 32 and 64. When the thread length is different, the time taken is different, and according to the principle of superposition, it will go up and down. When all the processes are running at the same time, there is a peak, and all or part of the run is finished, which is the trough.

Hope it helps.

It can be concluded that it is caused by poor CPU heat dissipation or insufficient power supply.

If the CPU core exceeds a certain temperature (at this time, the CPU surface is generally above 70 degrees), it will automatically reduce the voltage, frequency, and effective speed to reduce the heat generation.

Note: The internal circuit of the CPU sends out a shutdown command, which is different from the overheating shutdown in the COMS settings of the motherboard, which cannot be intervened or changed by the user.

1. Check whether the power cord of the CPU fan is properly connected.

2. Remove the CPU fan and clean it, and the silicone grease on the heat sink is best to be re-applied3. If there is no relief after reinstalling the radiator, it is recommended to buy a new radiator.

4. Use Everest to monitor the CPU temperature, if it is not high, it is likely that the power supply is insufficient or the quality is poor. Buy a new power supply.

There are many programs running in the background and they are unstable.

1All graphics cards belong to G41 integrated graphics cards,And the machine uses G41 as a motherboard, which is not suitable for 3DMAX such as 3D design software,In addition, the memory is low,2G memory is well-off under XP,But to win7, it can only be said to be food and clothing - and it is DDR2 - -

The Celeron E3200 CPU itself is a low-frequency CPU. Running design software The cache can't keep up with --

At the end of the day, this machine wasn't designed at all.

If you're not in a hurry, then take it and let it render on its own, and it's possible to render a high image for a few hours.

Solution, if possible, directly replace the entire computer. The CPU, motherboard, and graphics card of the machine are not suitable for design, and some friends will object that buying another graphics card can be improved, which is purely half the effort, and the PCI-E graphics card interface on the G41 board is not a full-speed interface, so it can't be reflected in G41 when you buy a good graphics card.

As for the CPU, it needs to be replaced, at least at the core level, especially if you are still using 3DMAX10-

I've always only heard its sound, and I don't dare to use it,,, the old machine at home is so tired that I'm running 7 to death

If the conditions don't allow it,Then it's just like I said above.,Simply buy a good graphics card first.,It's a big deal to save enough money and then change the motherboard CPU or something.。。。 Let's enjoy the interface of the full-speed PCI-E at that time

This computer is not suitable for 3D and the like. The onboard graphics card consumes CPU resources in itself.

A graphics card for mid-range professional graphics users, **block letters are more than 4000 yuan (professional graphics cards are expensive, reaching 4-5 times that of the same display core game graphics card)!

The graphics card is not good, and it can be solved by changing the hardware.

3DMAX10 large software is CPU intensive, so you should check your software and try to install the new version of 3DMAX10

Update the NIC driver. It may be that there is a problem with the network card driver that comes with win7. It's good that I've updated it.