How to eliminate the Toyota Lei Ling maintenance lamp, how to eliminate the Lei Ling maintenance lam

The following ways can be used to eliminate the Ralink maintenance lamp.

1. First turn the car key under the steering wheel to power the vehicle, otherwise the maintenance light of the Toyota Levin cannot be eliminated.

2. After that, click the DISP instrument information adjustment button on the right side of the steering wheel to adjust the instrument information to the maintenance function.

3. After that, click the MODE button on the left multi-function steering wheel, so that the maintenance light is eliminated.

4. You can see that the maintenance light on the dashboard of the vehicle has been eliminated.

Turn off the ignition, press and hold the big button on the right side of the steering wheel with your left hand, turn on the ignition with your right hand, don't activate, the wrench will flash five times until it disappears. Reset successful.

If you want to turn it off, there's actually a black button under your seat. As long as you turn it off, you're good to go.

Put the ignition in ON mode and press the maintenance light reset button on the instrument cluster until the short-range odometer A appears. Turn off the ignition switch, press and hold the maintenance light zero button to rotate, put the ignition switch in ON mode again, press and hold the maintenance light zero button, rotate until the mileage is cleared, 5 seconds later, the odometer A will display 000000, and the maintenance light will complete the reset and elimination.

The style of the front face of Toyota Lei Ling has increased compared with the old line, the front fenders on both sides are raised, and the narrow L-shaped headlights have reduced some roundness, and the horizontal width has been increased visually. At the rear of the car, a black trim plate runs through the taillights on the left and right sides, and the black underneath surrounds the bottom and wraps the bottom, which is special. The tail shape is very agile and lively, and the two taillights are connected with chrome decoration, which looks very delicate and beautiful.

On the side of the body, the styling is still very compact.

1. To eliminate the maintenance lights of the vehicle, you need to turn off the ignition switch of the Toyota Leiling vehicle first.

2. Next, you need to keep pressing the single meter reset button on the dashboard of Toyota Leiling car.

3. At this time, you need to turn on the ignition switch of Toyota Leiling car again, and keep the button in the previous step pressed.

4. Finally, when the odometer of Toyota Leiling car is displayed, immediately release the operation button in step 2, and the maintenance light of Toyota Leiling car will be eliminated.

1: Press and hold the small wrench button with your left hand, and then turn on the ignition switch with your right hand (the position before landing).

2: Release the small wrench button with your left hand and press the minute button of the time adjustment button.

3: Turn off the ignition and leave the time button with your left hand. When the ignition is switched on or the engine is started, the maintenance prompt disappears and the manual maintenance reset ends.

Zeroing the maintenance lamp is very simple:

1.Turn on the power and the panel switches to Trip A.

2.Turn off the power, press and hold the reset button on the panel until the wrench light goes off.

When the short range odometer reset button is pressed, switch the engine switch to the "on" position (do not start the engine as the reset mode will be canceled). Keep holding the switch until the short distance odometer shows "000000":

1.Tachometer, which shows the engine speed per minute.

2.Speedometer.

3.Fuel gauge.

4.Short range odometer reset button to toggle trip information. The "Disp" switch on the right side of the steering wheel can also be used to toggle travel information.

5.Gears and Ranges *

6.Outside temperature display.

7.Engine coolant temperature gauge showing engine coolant temperature.

8.The driver monitor display provides the driver with a variety of driving-related data, including the current outside temperature.

Answer Autumn is high and cool, the mountains are red all over, in this fruitful golden autumn, I wish you wealth like autumn rain, love like autumn water, troubles drifting away with the autumn wind, career as mature as autumn fruits, and a clear mood like the autumn moon.

1. Press the "A" button and press the brake pedal, neither of which can be released halfway.

2. The engine cannot be started, but the power of the vehicle must be turned on.

3. At this time, the dashboard or characters flash.

4. Continue to press down the zero button "a" until "...appears on the display.

5. Release the brake pedal and release the "A" button at the same time.

6. After the maintenance light reset operation is completed, turn off the power of the vehicle.

To eliminate the GAC Toyota Leiling maintenance lamp, you need to start the engine first, turn on the power supply of the whole car, the maintenance lamp is set by the car factory to let the owner set a reminder function according to a certain mileage or time, in the form of instrument or screen information or indicator light, remind the owner of the model maintenance; The specific operation steps to eliminate the GAC Toyota Leiling maintenance lamp are as follows:

1. Press and hold the maintenance elimination shortcut key of the GAC Toyota Leiling dashboard and do not release it.

2. Press the driver's brake pedal of GAC Toyota Leiling.

3. Rotate the car key of GAC Toyota Leiling to the ON gear.

4. When the instrument of GAC Toyota Leiling lights up, release the maintenance elimination shortcut key.

5. Press the OK button of the GAC Toyota Leiling multi-function steering wheel to confirm the elimination.

The elimination method of Toyota Levin maintenance lamp is as follows:1. First of all, let Lei Ling be in ON mode.

2. Press the maintenance light reset button, and then rotate it until the short-range odometer A appears.

3. Turn off the ignition switch and let the cherry shed be in OFF mode.

4. When you press and hold the maintenance light zero button to rotate, put the ignition switch in ON mode again, press and hold the maintenance light zero button to rotate until the mileage is cleared, and after 5 seconds, the song roll odometer A will display "000000", and the maintenance light will complete the reset.

Toyota LeilingBased on Toyota's MC platform, it is a new sensory Lingxiu compact sedan that is deeply customized for Chinese consumers, which debuted on April 18, 2014 and was officially launched in the summer of 2014. The Lelink is based on the 11th-generation Corolla of Toyota's A-segment. The American version of the Tanze, with its sharp appearance and excellent quality, has been selling well in North America for many years, and its sales have long ranked first in the A-segment car market.

Lei Ling has inherited the champion gene of this model, with a very high quality foundation. The design creativity of the American version of the Leiling model is based on the North American raptor bald eagle, and the design of the Leiling has also inherited its fierce style. This sharp appearance gives Lei Ling a high degree of recognition, and creates a heart-pounding sense of déjà vu for Lei Ling.