The reason why you have to press the F1 key every time the computer is restarted to start

It can be seen from the prompt that there may be a problem with the frequency or working voltage of the CPU between the CPU and the motherboard, a prompt after it is automatically restored, or a problem with the motherboard such as CMOS

Just like when I used to work in the office, I had to press F1 every time I turned it on

Then I pressed it for almost two months, and then one day the computer crashed and was invaded by a virus.

Our network manager reinstalled it for me and I didn't have to press it! You reload and try it!

Get rid of unnecessary tests from the BIOS.

Boot requires pressing F1 to enter the system troubleshooting.

Under normal circumstances, the requirement to press F1 to enter the system is caused by a minor problem with the system's BIOS settings that do not affect the system startup, so please check the hardware information settings in the BIOS for discrepancies with the actual situation.

The common faults in general are:

1. The battery on the motherboard is dead.

Solution: Replace the motherboard battery.

2. You have set up the floppy drive to start, but there is a problem with your floppy drive.

Solution: A. Press del to enter the BIOS at boot, boot up the boot sequence, and turn off the floppy drive to boot.

b. Turn off the detection function of the floppy drive when it is turned on

Start the computer and press the [DEL] button to enter the main BIOS settings interface.

Select the "Advanced BIOS Features" setting item and press the Enter key to enter;

Set "Boot Up Floppy Seek" to "disabled" to turn off boot software detection.

When booting up,Win7 system users always need to wait for a while to enter the system,Some users feedback that during this period, the screen will appear "pressf1tocontinue,deltoentersetup"prompt,And the screen is frozen,You need to press the F1 key to start the computer normally。 It doesn't affect our normal use of the computer, but it feels weird. Why is this happening?

What should we do in this situation? Let's find out!

Reason:

1. There is no floppy drive or the floppy drive is broken, and there is a floppy drive in the BIOS, resulting in pressing F1 to boot up to start normally;

2. I originally hung two hard disks and set up two hard disks in the BIOS, but later removed one of them and forgot to change the BIOS settings back;

3. If the motherboard battery is not lost, it will also cause data loss.

4. Reboot the system, enter the BIOS settings, and find that the floppy drive is set to, but there is actually no floppy drive in the chassis.

Workaround:

1. Replace the motherboard battery;

2. Press del to enter the BIOS at boot, boot and start the order, and turn off the floppy drive to start;

3. Start the computer and press the [DEL] button to enter the main BIOS settings interface.

4. Select the "AdvancedBiosFeatures" setting item and press the Enter key to enter;

5. Set "bootupfloppyseek" to "disabled".

The above is the reason and solution for win7 system users who need to press the F1 key to turn on the computer normally.

Have you ever encountered the phenomenon of pressing f1 or f2 when the computer is turned on, and you have solved such a problem in this way. Today we're going to teach you how to turn off this pesky F1 key.

That's when the motherboard battery is dead, disassemble the main unit, you can find the battery (usually a button battery), just remove it and replace it with a new one.

Looks like you won't be able to do the BIOS setup if you do. Just reinstall the system!

If you are prompted to press F1 at startup, there is a non-critical error in the CMOS settings, and pressing F1 can ignore this error and continue to run.

If you don't want to press F1 every time you boot up, you need to go to the CMOS settings to find the wrong settings and modify them, such as the common problems:

1. In fact, there is no floppy drive or the floppy drive is broken, but there is a floppy drive in the BIOS, which leads to pressing F1 to continue.

2. I originally hung two hard disks, and set them as dual hard disks in the BIOS, but later forgot to change the BIOS settings back when I removed one of them, which will also cause this problem.

3. If the motherboard battery is out of power, it will also cause data loss, which will cause this failure.

If you really don't know** the settings are wrong, you can choose to load the default settings or the best settings. Press F10 again to save and exit and restart.

Well, a lot of old-fashioned machines are like this, you have to set up the BIOS, it's better to find a professional one, just set it up, and it's useless to reinstall the system.

This comes with the system and can be canceled in the BIOS.

Press the delete key to enter the BIOS to cancel when the computer is turned on.

Questioner: The ** you upload does not show the question you asked. If F1 is displayed, you should look at the English prompt displayed in front of F1, and you can know the problem encountered by the computer according to the content of the prompt, and make corresponding solutions. The occurrence of such a problem does not affect the normal boot and operation of the computer.

There are several possibilities: the keyboard cable is not connected; The cables of the internal accessories of the computer are not properly connected, etc.

Hope this answer will help you.