TP LINK TL WR740N 150M WIRELESS ROUTER, HOW DO I SET IP BANDWIDTH CONTROL FUNCTION?

Generally, DHCP automatically assigns IP addresses, you can only manually specify the IP addresses of your and your friends' computers, as for the IP bandwidth control function, this function of WR740N is not very perfect, you can enter the wireless router to open the IP bandwidth control "Add a new entry".

IP Address Range: Start Address Set to: End Address: The DHCP of the WR740N is automatically assigned from the start by default. So you can press the settings above, as for the downlink bandwidth, yours is 12M. Can be set to.

The minimum bandwidth is 4096kb, the maximum bandwidth is 8192kb, so that no matter who you two are**something, the maximum**speed is only 8192kb, and the minimum is 4096kb, uplink bandwidth: the minimum is set to 20kb and the maximum is set to 80kb so that it should be enough, and there is no problem with opening an online game and yy. However, I would like to point out that the IP bandwidth control function of the WR740N is not very perfect.

**P2P terminator is set,You can monitor it under the system when he doesn't** when he restores it,The speed of the game is life,When setting, set your own minimum speed of 4m downlink speed (3m can also be) uplink 40kb (45 can also be used, but he will be very stuck when he looks at the web page and other games,So in the software to see that he no longer restores things,And then there is the theory of uplink speed 60kb, which is actually only 50 close to 60 or so,How to distribute what you want)

Hope it helps.

Welcome hi me.

IP bandwidth control.

The bandwidth control function can control the Internet bandwidth of the LAN computer. In the case of insufficient bandwidth resources, the bandwidth of various data packets can be controlled to achieve reasonable bandwidth allocation and achieve the purpose of effective use of existing bandwidth. With the IP bandwidth control function, you can set the upper and lower bandwidth limits of computers in the local area network, ensuring that each computer can share the network smoothly and make full use of the network bandwidth when the network is idle.

Select the menu IP Bandwidth Control and you can see:

Click on the sub-item in the menu to make specific settings, and the following will explain the functions and settings of each sub-item in detail.

IP bandwidth control settings.

Select IP Bandwidth Control to enter the interface shown in the following figure.

Enable IP bandwidth control: Select whether to enable the QoS function, and then you can set the QoS Rules only when it is enabled here.

Enough to take effect. Bandwidth Line Type: Select the type of bandwidth line you want to apply for, and only ADSL lines and other lines are distinguished.

Columns in the list of rules:

z Bandwidth: The maximum speed that a computer in the IP segment can achieve when it goes online. If the mode of the rule is "Guaranteed minimum bandwidth", the total bandwidth of the IP addresses (or IP address ranges) restricted by this rule can reach at least this value. If the mode of the rule is "Limit maximum bandwidth", the total bandwidth of the IP addresses (or IP address ranges) that are restricted by the rule can only reach this value.

z Remarks: A textual description of the rule should be no more than 10 words (including punctuation).

z Enable: Displays the status of the rule and selects Enable to make the setting take effect.

z Clear: The rule is cleared.

Set the upper limit of the downlink bandwidth occupied by each computer to 1/2, that is, 500kbps, to ensure that each computer is the most.

It occupies more than half of the network bandwidth. Here's how to set it up:

1.On the page shown in Figure 5-41, select Enable IP Bandwidth Control to enable IP bandwidth control.

2.In the interface shown in Figure 5-41, fill in the IP address range with ID 1."

3.In Mode, select Limit maximum bandwidth, and fill in 500 for Bandwidth size. Tick "Enable" at the end.

4.Click the Save button, that is, the setting is successful.

TP 740 doesn't have this function!!

You can only limit whether others can access the Internet, and you need to see if the router has a traffic control function!

It is recommended that you buy a tenda, and the roll call should be controllable.

Controls the default upstream bandwidth of 512

The default downstream bandwidth is 2048

Control Rule Address Range—Assumes the wired address is.

Port Segment 1-65535

Protocol all

The minimum uplink bandwidth is 0 and the maximum uplink bandwidth is 256

The minimum downlink bandwidth is 0 and the maximum downlink bandwidth is 1024

In the same way, if you configure a wireless IP rule, you can divide the bandwidth equally between the two machines.

If it's fiber broadband, the uplink is the same as the downlink.

If it's ordinary broadband.

Then the downside is 256

The upside is below 50.

What I want to say is that if the two machines upload more than 50k s, it will freeze according to the settings of your router.

You can set the uplink to a maximum of 300

The downside is unchanged. If you have any questions, just hi me.

1.Is the IP of the two computers within the regular range? If an IP is not within the rules, it will not be subject to network speed control.

2.Broadband type: Select ADSL to try.

3.After changing it, remember to save and restart the next route!