Split air conditioner, how to position the installation position? 40

The location of the outdoor unit is relatively good, always under the window or on the side.

It is recommended to set the position of the indoor unit according to the length of the indoor and outdoor connecting pipes (there are 3 meters of piping and 5 meters). Don't add pipes, one is expensive, and the other is that you need to supplement the refrigerant (potion). Do not install the indoor unit too high, so as to save energy.

It is better to lean against the corner of the wall and not blow directly on the person who receives Holy Communion.

Summer is coming, and many friends who have just finished renovating have also begun to choose home appliances. Air conditioning is naturally an essential appliance. But what's the point of installing an air conditioner? These three details are easy to overlook, and everyone needs to pay attention!

1.The air conditioner should not be facing the head of the bed.

When decorating the air conditioner, the location of the air conditioner is particular. If the installation location is not suitable, it is likely to suffer from air conditioning in the next few years or even more than a decade. Originally, the air conditioner was turned on for enjoyment, but I didn't expect it to be asking for trouble.

If you have the option, try to install the air conditioner at the head of the bed or on the side to avoid blowing the air conditioner on your head. The air conditioner blows directly and is easy to catch a cold.

Of course, if you want to prevent direct blowing, you should pay special attention to the "anti-direct blowing function" when purchasing an air conditioner. Take Konka intelligent fresh air conditioner KFR-35GW HAXF1 as an example. This air conditioner uses wide-angle air supply and supports one-key direct blowing.

The machine is equipped with a herringbone air deflector, so the air supply will be relatively gentle, and there will be no direct blowing.

2.The socket should be as close to the air conditioner hole as possible.

Installing an air conditioner requires holes in the wall, which will also affect the aesthetics. And some fresh air conditioners need two holes. If there is a choice, the prettier the better.

In addition to the tuyere, the traditional fresh air conditioner also needs to make fresh air holes. Later, only one hole could be used, but a reamed hole was required. In fact, with the advancement of science and technology, there are also new solutions.

Konka intelligent fresh air conditioner KFR-35GW HAXF1 can use the original hole position when installing, only need a hole with a diameter of 63mm, no need for secondary drilling or reaming, the installation is more convenient and beautiful.

3.The installation height should not be too high.

Many people install air conditioners not far from rooftops, which is actually wrong. Although this installation method can avoid direct blowing, it also increases the difficulty of later cleaning. Many people may think that air conditioners do not need to be cleaned regularly, but in fact, air conditioners can breed a lot of bacteria and dust.

If you want to save the trouble of cleaning later, you should pay attention to the self-cleaning function when choosing an air conditioner. Konka intelligent fresh air conditioner KFR-35GW HAXF1 is equipped with the fifth-generation self-cleaning ability, which can be started with one key when standby, and realizes 57 high temperature automatic steaming. It can be done in 30 minutes, and the fire extinguishing rate is high.

In addition, Konka intelligent fresh air conditioner KFR-35GW HAXF1 also adopts a dual-drive fresh air system, equipped with a five-layer filter, which can not only filter out impurities and dust in the air, but also effectively block harmful gases such as formaldehyde outdoors to ensure that the indoor air is fresh at all times.

There are many particulars about the installation location of air conditioning, and the general installation location of air conditioning:

1. The location of the air conditioner in the bedroom:

When the air conditioner is installed in the bedroom, the air conditioner should not be facing the bed, it can be installed on the background wall of the bed, and then the position of the bedside is staggered to the left or right of the bed.

If the bedroom area is less than 10 square meters, the beds are basically below the air conditioner, so it is necessary to pay attention to the temperature regulation of the air conditioner, and the bedroom with a larger air conditioning area should appropriately open the distance between the air conditioner and the bed. The air-conditioning hole should be tilted outward, and the air-conditioning socket should have the most relevant configuration switch, and the air-conditioning socket should be driven into the wall of the air-conditioning hole as much as possible.

2. The location of the air conditioner in the living room:

If the living room is a 2P cabinet, remember that the air conditioner should not be too close to the LCD TV, so that it is easy to magnetize the LCD TV. The air conditioner should also not be directly facing the TV, as this will affect the TV.

If it is a cabinet unit, the air conditioner is installed above the TV, which will also have an impact on the TV. There is also the position of the air conditioner in the living room to be convenient to connect with the outside unit, and do not blow the wind on the sofa, which will cause the person sitting on the sofa to feel uncomfortable, and it is generally installed at the corner of the end of the indoor wall against the outer wall, and it should be placed obliquely at 45 degrees.

Air conditioning will be available in every home now, but in fact, air conditioning is also divided into many kinds, such as window air conditioning and split air conditioning. There is a popular saying in the air conditioning industry that "air conditioners are three points of quality, and seven points of installation". So let's find out togetherSplit air conditioningHow to install and how to disassemble the split air conditioner.

1. How to install a split air conditioner.

1. First of all, we need to adjust the system pipeline inside the machine. The installation of split air conditioners must regularly clean the pipes of the indoor unit system of the air conditioner to discharge rust, dust and other debris; Regularly add chemicals to the system to prevent rust from the copper pipes. This can effectively avoid the occurrence of split air conditioner blockage, and is also conducive to improving the service life of the air conditioner.

2. Then we need to fill and exhaust in time. The installation of split air conditioners requires that the indoor unit of the air conditioner is filled with water, and the air is regularly exhausted for the split air conditioner; Also regularly check whether the exhaust valve of the split air conditioner is in good condition. If the exhaust valve of the split air conditioner fails to fail, it will be easy to cause blockage.

3. Adjust the temperature meter of the air conditioner. The installation of split air conditioner first requires the operator to pay more attention to whether the temperature of the instrument is normal, and if the temperature of the split air conditioning instrument is abnormal, it must be dealt with in time. When the temperature is relatively low and calm, we should appropriately increase the opening of the hot water valve.

4. Preheat before use. When installing a split air conditioner, in addition to adding an interlocking electric thermal insulation air volume regulating valve at the fresh air inlet of the indoor unit of the air conditioner, a preheater should be installed between the distance from the fresh air to the surface cooler. In winter, the outdoor fresh air temperature is raised to above zero degrees and then comes into contact with the surface cooler, so that in the event of other unexpected situations such as power failure, failure of the circulating water pump or blockage of the surface cooler, it will not pose a threat to the surface cooler.

2. How to disassemble the split air conditioner.

1. The wrench unscrews the connecting lock nut of the indoor unit, and uses the prepared sealing sodium to unscrew the silk pattern of the connecting joint of the indoor unit to prevent the silk pattern of the joint from being damaged during handling; Then use the cross to remove the control line. At the same time, it is necessary to mark well to avoid the wrong connection during installation. If the signal line or power cable is connected incorrectly, the external unit will not work, or the machine will not be controlled.

The internal hanging plate is generally fixed firmly, and it is difficult to unload; After unloading, remove the hanging board, put it on the flat cement floor, and then gently pat it flat and correct.

2. After unscrewing the connecting lock nut of the external machine, then the sealing sodium screws are screwed to protect the silk pattern of the connecting joint of the external machine. Then use a wrench to loosen the fixing screws on the foot of the outer machine. When putting down the outdoor unit after disassembly, it is best to hang it with a rope, and pay attention to balance while unloading to avoid vibration and bump.

Slowly straighten the pipes of the outdoor air conditioner and seal the four ports of the connecting pipe with the prepared four plugs to prevent dust and moisture from entering the air. The plug is good, and finally tied with a plastic bag and placed for easy handling.

The above content is based on how to install the split air conditioner and how to disassemble the split air conditioner, I don't know if you have a certain understanding of how to install the split air conditioner after reading this article.

First of all, we first prepare the tools for installing the air conditioner, clean up the debris and dust, and then we can start the work of air conditioning installation.

1. Tools for installing air conditioners

Air conditioners must be installed, connected, and commissioned to form a complete operating system. The installation of air conditioning will greatly affect the use of air conditioning in the future and the quality and quantity of air conditioning. So in this industry there is a saying of "three points of quality, seven points of installation". Seepage.

2. Installation of air conditioner internal unit

The indoor unit of the air conditioner should be kept at a distance of about 20 cm from the top of the room and the walls on both sides to prevent the air circulation from being blocked. When selecting the location of the indoor unit, it is necessary to take into account the problem of drainage, and the outdoor unit pipe can be connected to the outdoors; Choose a place where there are no items below, and the air outlet should not blow directly to the bed or sofa or other resting places.

3. Installation of air conditioner outdoor unit

It can maximize the cooling and heating effects of air conditioning, and minimize the impact of adverse factors such as noise, vibration, condensate, cold and hot air; Place it as close to the outdoors as possible, so that the ventilation is good, and there should be a certain amount of space on the left and right sides of the outdoor unit; Avoid direct sunlight and, if necessary, use it with a visor, but not obstruct air circulation; Do not put it in the kitchen, where there is heavy oil smoke or a lot of sand, poor heat dissipation or a high temperature heat source; Avoid places where leaks are prone and have strong corrosive gases.

Split air conditioner is a kind of indoor and outdoor separated air conditioner, which consists of two parts: indoor unit and outdoor unit. When installing a split air conditioner, you need to pay attention to many details, and the following article will introduce the installation method of split air conditioner leakage.

1.Plan the location of the installation.

First of all, you need to consider the installation location of the split air conditioner. Ventilation, heat dissipation, indoor air circulation and other issues should be taken into account when using air conditioners to avoid problems such as poor air circulation and poor ventilation.

2.Install an outdoor unit.

When installing the outdoor unit, you first need to place the outdoor unit on a flat ground, and if possible, you can make an imitation grip plate support to fix it. Make sure there is no buildup around the machine so that it can function properly. Then, you need to use the fixing bracket to adjust the height of the outdoor unit to ensure that it is level, and fix it with expansion bolts to make it neat and beautiful.

3.Install the indoor unit.

When installing the indoor unit, you should first select the installation location of the air conditioner, and then reserve a flat hole that deviates from the pipe, and prepare cables, wires, perforated pliers, etc.

4.Install air conditioning accessories.

During the installation process, it is also necessary to pay attention to the installation of some air conditioning accessories, such as risers, elbows, sealing belts, F-pipes, etc.

5.Connected to each other.

When all the components are in place, it is time to connect the outdoor unit and the indoor unit. It should be noted here that the indoor unit of the split air conditioner and the outdoor unit must be connected with wires and copper pipes, and the wires are connected to the power supply, and the copper pipes are responsible for transmitting the refrigerant. When connecting with electricity, connect in strict accordance with the wiring diagram to check whether there is an electrical fault.

6.Debugging.

After the installation of the air conditioner is completed, it needs to be debugged and put into trial operation to ensure that there are no problems such as electricity leakage and water leakage.

The above is the method of split air conditioning installation, although the installation process of split air conditioning looks complicated, but as long as you follow the above steps step by step, it will be easier to achieve. However, it is worth noting that when installing split air conditioners, it is necessary to comply with relevant regulations, operate safely, and ask relevant professionals to construct and install them to ensure the safety of users and the use of air conditioners purchased.