What should I do at each stage of the fire engineer exam?

1. Regular learning status.

Maintaining a regular study state before the exam is crucial to pass the exam, which requires candidates to spend about three hours a day on revision, focusing on the high-frequency test points of each subject and the knowledge points of fire engineers that have been published over the years. And pinch the points to do the fire engineer past questions, and study the knowledge points in the past questions. The mistakes accumulated in the past should be reviewed regularly, and the combination of the three should be gradually cycled to gradually advance the learning progress.

2. Upward psychological state.

Mood directly affects the state of learning, many candidates are prone to anxiety before the exam, and the questions cannot be done, the book cannot be read, and the precious preparation time is wasted. In order to improve the efficiency of review and preparation, candidates need to maintain a positive learning attitude, face various problems in preparation with an invincible mentality, and overcome the problems one by one.

3. Healthy physical condition.

Preparing for the fire engineer exam is a mental and physical thing, as the so-called body is the capital of the revolution, it is important to maintain a healthy physical condition before the exam.

Some candidates are accustomed to raiding before the exam, reading at night in the last few days, sleeping only three or four hours a day, and studying for a long time is easy to produce brain fatigue, which is not only not conducive to preparing for the exam but will affect the development of normal work and life. Therefore, candidates should try to ensure 7-8 hours of sleep and maintain a healthy body to meet the exam.

Only with a good study, physical and mental state can you avoid worries and go all out to sprint for the exam.

1. First of all, analyze the relationship between the three subjects

The knowledge system of the three fire protection departments is the same; "Case Analysis" does not have its own basic knowledge, and his basic knowledge is all "Technical Practice" and "Comprehensive Ability"; However, 70% of the data of "Comprehensive Ability" comes from "Technical Practice"; Therefore, the core of the focus is on technical practices.

2. Let's talk about the knowledge span of the fire test.

The fire examination is divided into construction, water supply and drainage, HVAC, electrical, and fire automation control. The fire test is divided into fire protection design, fire construction and installation, fire commissioning, fire acceptance, and finally maintenance and use management.

3. Suggested learning order: technical practice, comprehensive ability, case analysis 4, fire learning, just reading books is not enough, according to the analysis of +18 years of real questions, there are many knowledge points of fire protection are not in the book, but in the norms (national standards), the basis of the question: is the official textbook + main specifications.

The approximate preparation period is 3-12 months, which varies from person to person and from person to person.

There are three subjects in the first-level fire engineer examination, namely "Fire Safety Technical Practice", "Comprehensive Ability of Fire Safety Technology" and "Fire Safety Case Analysis", and the focus of the three subjects is as follows:

"Fire Safety Technical Practice" focuses on construction and facilities, and must be based on the principles and integration of the three examinations.

The content of the construction chapter of "Comprehensive Ability of Fire Safety Technology" is almost identical to the content of the technical practice construction chapter, while the facility chapter is mainly practice-oriented.

The content of the construction chapter of "Fire Safety Case Analysis" is mainly practice-oriented, the examination method is mainly to correct errors, the difficulty lies in the facilities, the examination methods are based on multiple-choice questions, error correction, short-answer questions, fault analysis, and the management chapter is mainly based on selection.

After reading the key points of the three subjects, the order of review should be straightened out! The suggested order is "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability", and "Fire Safety Case Analysis".

If you want to apply for the fire engineer exam, it will take one or two years to prepare for the exam, because you are a fire engineer after all, not a firefighter, and the difficulty index is relatively large.

There is no exact time for the fire engineer exam to prepare, and you should start as early as possible to lay a good foundation!

First of all, how can candidates have the certainty of successfully passing the fire qualification examination? The most important condition is whether you have a solid and solid professional foundation, and among the candidates who sign up for the exam every year, most of the candidates have a poor foundation or zero foundation, and it is obviously impossible to obtain such a foundation for a day or two, so one of the reasons why candidates start preparing for the exam as soon as possible is to be able to lay a good professional foundation.

Moreover, although there are not many subjects in the fire examination, in addition to case analysis, the knowledge content of the two subjects of practice and synthesis alone is even more than the sum of several subjects of other qualification examinations, so in the face of such a large number of knowledge points, candidates who want to lay a good foundation can only start as soon as possible, make a good study plan to first familiarize themselves with the knowledge system in the textbook, and then study systematically according to the plan. Through practice, let yourself know the application of knowledge, in order to let yourself understand the test center and master the test point, because the knowledge is professional and difficult, so time and reasonable methods are the key to laying a good foundation.

Cultivate interest. Fire engineers have three thick textbooks, including many knowledge points, many key and difficult test points need to be memorized, so we must cultivate interest in learning, and take learning fire knowledge as a kind of fun, so that we can learn without getting tired and learn happily, so as to achieve twice the result with half the effort.

Don't memorize.

If you want to memorize something, you can't memorize it, but understand the meaning of it, so that you can remember it quickly. If the machine is passive, just remembering for the sake of remembering, then in the end it often backfires and is meaningless.

Good at taking notes.

A good brain is not as good as a bad pen, and in the face of a large number of knowledge points, candidates should develop a good habit of taking notes. Whether you are doing exercises or past past questions, you must record the difficult points of the test one by one, and review the knowledge points of these records again a few days before the exam, which will help strengthen your memory.

Repeat memories. Needless to say, some fire knowledge points are difficult to memorize accurately, which requires repeated memory. One day doesn't work for two days, two days doesn't work for three days. Until you memorize it completely. If you want to remember something, you have to show this perseverance, and there will always be a reward for your efforts.

As we get closer and closer to the Fire Engineer Exam 2020, are you ready? I hope that the above suggestions can be helpful to the majority of candidates. 2020 Fire Exam, Let's work together!

There are three subjects in the fire engineer examination, namely: "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability" and "Fire Safety Case Analysis", different subjects have different characteristics, and different characteristics also correspond to different efficient learning methods, if you want to improve the learning efficiency of fire examination review, it is very important to establish a correct fire learning thinking model. Below we will introduce the review methods of the corresponding three subjects in three parts, and today we will first explain the "Fire Safety Technical Practice" (hereinafter referred to as "Technical Practice").

Based on your question, the following five points are summarized for you.

First, it is based on the outline.

The syllabus divides the content in the textbook into three levels: mastery, familiarity, and understanding. The knowledge points required by the outline must take time to read more, and the knowledge points not required by the outline do not have to spend a lot of time to understand, just read through. According to the requirements of the test syllabus, to ensure that there is enough time to understand the knowledge points in the textbook, the test designated textbook contains the range of propositions and the standard answers to the test questions, and all the questions raised in the exam must be answered according to the content, views and requirements of the test specified textbook, otherwise it is difficult to pass the exam.

Second, it is gradual.

If you want to get good grades, the more effective way is to read the book three times. Look at it most carefully for the first time, never let go of every key point and difficulty, and the process should take a long time; The second time is faster, mainly to review the important knowledge points drawn out in the first time; The third time I read it quickly, mainly because I didn't understand it or didn't thoroughly grasp the knowledge points in the second time. For this reason, it is recommended that candidates make a realistic study plan according to their own situation before reviewing, and arrange their revision accordingly.

Try to arrange the exam review time in a unified and planned way when arranging work.

Third, it is to grasp the key points.

When revising, it's important to pay attention to the relationships between these levels. Each course has its own knowledge points that must be mastered, and for these knowledge points, we must deeply grasp them, draw inferences from one another, and respond to all changes without change. If you want to be more efficient in revision, you must focus on the key points and avoid even distribution.

Grasping the key points can enable us to obtain greater benefits from the exam with less investment and be invincible in the exam.

Fourth, it is good at summarizing.

On the premise of carefully reading the textbook, while reading the book, make summary notes, and list the main points of each chapter in the textbook, so as to make the thick book thinner and understand its essence; In order to highlight comprehensive understanding and integration, it is not necessary to memorize all the content of the assigned textbook word by word. Instead, it is important to accurately grasp the complex meanings behind the texts, and also to connect the internal content of different chapters to be able to fully grasp the subjects of the exam as a whole. As we all know, the various subjects involved in the exam have the characteristics of rigor and pragmatism, although many questions may theoretically have different views and opinions, and need to use professional judgment, but in the exam, the answers to the exam questions are "unique", especially the objective questions.

Fifth, it is a selection of materials.

In a sense, exams are all about doing questions. Therefore, in the process of preparing for the exam, doing some practice questions and mock questions appropriately is an indispensable part of the success of the exam. Doing more practice is beneficial, but don't give up on the basics and replace learning with questions.

The practice is only aimed at testing and consolidating the knowledge learned, and we must not engage in any major battles.