Is Fire Engineer Hard? How do I prepare for the exam? Which subject is better to study first?

A few tips on preparing for the Fire Engineer I exam.

To prepare for the exam, you should pay attention to the method and study efficiently. Whether the method is appropriate or not directly determines the success or failure of the exam. Each discipline has its own laws and characteristics, and it is necessary to grasp these characteristics and achieve twice the result with half the effort. Give a general advice:

1.To complete the class content with high quality;

2.Be sure to review the content of the teacher in time after listening to the class, especially the after-class practice questions of each chapter, you must do it yourself when reviewing, not just watch, because there is a big difference between being able to understand and being able to make it independently.

3.When completing a topic, we should consider the knowledge points examined by the topic, what type of question type it belongs to, and what kind of good ideas, methods, and templates there are;

4.The study time should be reasonably arranged, and the study should not only look at the foundation or professional practice for a long time, and the study should have a reasonable match.

One: Reading is not detailed, not thorough, swallowing dates, rote memorization, and no understanding.

Reading books is always guided by the syllabus, and the knowledge points outside the syllabus are ignored, resulting in more points and heavy losses when encountering knowledge points outside the syllabus when taking the exam. There are many knowledge points in the first-level fire engineer that require us to memorize comprehensibly, rather than rote memorization, which will waste a lot of time and result in half the effort. Therefore, candidates must learn to understand memorization and integrate it with actual work.

This is beneficial and harmless for the exam.

2. Blindly divide the key and non-key points, invest too much energy in the key parts, and hastily pass the non-key parts at a glance.

What you get in the exam is the key point, and what you can't get is the non-focus. Therefore, candidates must make a review plan before preparing for the exam, and determine the key and difficult points according to the content of the exam syllabus. In order to facilitate contentious revision.

3. Passive acceptance when doing mock questions, not good at combining teaching materials, drawing inferences from one another, and not delving into the reasons for vague questions, so that the next time you encounter the same topic, you will make the same mistake.

This situation is a situation that often occurs to candidates, so when preparing for the exam, we should conduct in-depth research on our own ambiguous and important problems and solve them, so that we will not lose again in the examination room.

Fire engineers have a lot to learn, more than 1,200 pages of three textbooks, and more than a dozen specifications, and the content of each exam question may cover three textbooks and all specifications, so everything must be understood in order to take the exam.

The registered fire engineer examination needs to meet the college degree or above, not limited to majors, other majors need to meet 8 years of working experience, related majors need to meet 7 years, other undergraduate majors need to meet 6 years, related majors need to meet 5 years.

The fire engineer exam has a total of three subjects, fire safety technical practice, comprehensive ability, case analysis, three textbooks of about 1300 pages, the textbook is the basic framework, the specification is the upgrade, each subject has a large number of knowledge points to memorize, the three textbooks are the relationship between layers and layers, so it is usually learned according to the module.

Compared with other construction engineering exams, fire engineers are somewhat difficult, but there are candidates who have taken the exam every year, and it is no problem to pass the exam as long as they prepare carefully.

If you want to prepare for the exam, you must have a plan to prepare for the exam and study in real life. If you are an office worker, it is recommended to register for work, which is more efficient.

Do you need handouts for the basic fire fighting class?

Fire Engineer Application Requirements:

Registration conditions for the qualification examination of first-class registered fire engineers.

2) Obtain a bachelor's degree or degree in fire protection engineering, and work for 4 years, including 3 years in fire safety technology; Or obtain a bachelor's degree in fire protection engineering or related majors, and work for 5 years, including 4 years in fire safety technology.

3) Obtain a double bachelor's degree or graduate degree including fire protection engineering, and work for 3 years, including 2 years in fire safety technology; Or obtain a double bachelor's degree or graduate degree in fire protection engineering related majors, and work for 4 years, including 3 years in fire safety technology.

4) Obtain a master's degree or degree in fire protection engineering, and work for 2 years, including 1 year in fire safety technology; Or obtain a master's degree or degree in fire protection engineering or related majors, and have worked for 3 years, including 2 years in fire safety technology.

5) Obtain a doctor's degree or degree in fire protection engineering, and have been engaged in fire safety technology for 1 year; Or obtain a doctoral degree or degree in fire protection engineering or related majors, and have been engaged in fire safety technology for at least 2 years.

6) For those who have obtained the corresponding academic qualifications or degrees in other majors, their working years and the working years in fire safety technology will be increased by 1 year.

Exemption subjects and exemption conditions for first-class registered fire engineers.

Those who meet the registration conditions for the qualification examination of first-class registered fire engineers in the "Interim Provisions" and meet one of the following conditions can be exempted from the subject of "Fire Safety Technical Practice" and only participate in the examination of two subjects: "Comprehensive Ability of Fire Safety Technology" and "Fire Safety Case Analysis".

1) Before December 31, 2011, the evaluation of senior engineer technical positions;

B) through the national unified examination to obtain a registered architect qualification certificate, or survey and design professional registered engineer qualification certificate.

Applicants who have taken the above subject examinations within 2 consecutive examination years and passed the examination can obtain the qualification certificate of first-class registered fire engineer.

Characteristics of the three subjects.

2. Comprehensive ability: It is an extension of technical practice, which mainly explains the practical operation experience such as inspection, commissioning, and acceptance, and there will be many small skills in it.

3. Case analysis: It is all about the practical application of real knives and guns, which is more difficult, and must be learned after technical practice and comprehensive ability to learn, not only because there are cases, but after some basic understanding of fire protection, you will also feel that this subject is particularly interesting.

Case analysis is the most difficult, it is recommended that the subject first look at the technical practice and comprehensive ability, and finally look at the case analysis.

Hello, glad to answer for you.

Exam Subjects

Registered fire engineers take a total of three subjects, and the results of the three subjects are valid for three years, which means that you can pass the three examinations within three years. The three exams are "Fire Safety Technical Practice", "Fire Safety Case Analysis", and "Comprehensive Ability of Fire Safety and Safety Technology".

Exam question types

The test questions for "Fire Safety Technology Practice" and "Comprehensive Ability of Fire Protection Technology" are objective questions. Multiple choice questions require you to choose the most appropriate option from the alternatives as your answer. In each question of "multiple-choice questions", there are two or more options that match the meaning of the question, and no points will be awarded for incorrect selection; Missed selection, each selected topic is scored.

In all multiple-choice questions, there are 80 multiple-choice questions, each worth 1 point; 20 multiple-choice questions, each worth 2 points.

In summary, it can be seen thatThe case analysis itself is relatively comprehensive, and the question type has objective questions with short answers, so most students feel that case analysis is the most difficult, and the technical practice is relatively simple and basic

Test scores

The 15-year question type of the "Fire Safety Case Analysis" subject exam is 6 subjective questions, and the subjective question is a comprehensive case analysis question; After 16 years, the question type is 2 multiple-choice questions + 4 subjective questions, and the subjective questions are comprehensive case analysis questions. The total marks of the three subject papers are 120 points. A minimum score of 72 (inclusive) is required for each subject.

Examination system

The examination results are subject to a three-year rolling management method, and only those who take the examination of the subjects in three consecutive examination years and pass the examination can obtain the first-class registered fire engineer certificate. On August 24, 2015, the Fire Bureau of the Ministry of Public Security issued Document No. 233 of 2015 for the examination of registered fire engineers in the middle of November in the second half of each year.

Hope it helps.

The 2018 fire engineer examination is not limited to majors, any major can apply for the examination if the conditions are met, and obtain the corresponding fire engineer qualification certificate issued by the state, and the professional and technical personnel who can be engaged in fire protection facility testing, fire safety testing and other fire safety technology work with this certificate.

Why are so many people rushing to apply for the fire engineer exam? What are the advantages of a fire engineer?

1.Talent is in huge demand.

According to the Ministry of Public Security Fire Bureau, in the next 3 to 5 years, China needs nearly 500,000 registered fire engineers, a wide range of demand, all walks of life, all important fire protection responsibilities of the unit and related intermediaries, all need to be equipped with a corresponding number of fire engineers to obtain qualifications.

2.The difficulty of the exam is decreasing year by year.

Since the first examination of a first-class registered fire engineer in 2015, the pass rate of general practice that year is only, the pass rate of general practice in 2016, and the pass rate of general practice in 2017 is 3%-5%.

3.Grade management is relatively relaxed.

The examination subjects of the first-class registered fire engineer are three subjects, and the rolling management method of a three-year cycle is implemented; The examination subjects for the second-level registered fire engineer and the first-class registered fire engineer exempted personnel are two subjects, and the rolling management method is implemented for a cycle of 2 years; This policy helps candidates to have more time to revise and can guarantee a higher pass rate.

4.There are many positions and high salaries.

Registered fire engineers can be engaged in business managers, project managers, fire protection engineers, budget officers, fire engineering project managers, water and electricity engineers, fire protection constructors, constructors, fire protection project managers, fire engineering budget officers, mechanical and electrical engineers, safety directors, safety consultants, etc.

5.The certificate is of high value.

The fire protection engineering major belongs to the public security technology category in the engineering category, of which there are 6 majors in the public security technology category, and the fire protection engineering major ranks first in the public security technology major, and ranks 44th in the entire engineering category. Among similar majors, the high ranking of the fire protection engineering major has created a high gold content of the registered fire engineer certificate.

6.Employment is good.

Fire engineer is the only one in the country that can be registered to the age of 70 access class certificate, according to the survey of the north, Shanghai, Guangzhou and other first-tier cities affiliated costs are considerable, now.

Second- and third-tier cities are also gradually understanding and implementing, and if you do a full-time job, it is a transformation in many friends' lives.

It's a pleasure to share with you your questions about Fire Engineers.

Among the three subjects of the fire engineer exam, the foundation is fire safety technical practice, and if you master and understand this book, you will be half successful. To understand and master the content of the textbook, the key and core are the second and third parts, which have a lot of numbers and basic knowledge that must be kept in mind. Don't memorize by rote, compare and summarize before and after, and compare and remember the same and related content or numbers or understand memorization.

Coupled with practice makes perfect, you should get twice the result with half the effort.

Finally, doing the right questions will help you adapt to the exam.

Good luck with the first pass!

First of all, the textbook must be read, understand the fire protection in order to learn fire fighting, or listen to the courseware, let the teacher take it to study together, and you can find relatives and friends to learn together, with a learning atmosphere to learn to get twice the result with half the effort.

According to the fire textbook for learning, first from the fire safety technology "practice" and "comprehensive ability" learning, they are the foundation, and finally learn the "case analysis" understanding and application, all the knowledge points and difficulties are in the textbook, more memory, more questions, summary review to deepen memory.

1. If you are a novice, it is recommended to start from the real thing in the comprehensive, and finally list the case.

2. If you have taken one or two exams, it is recommended to read them together with three in one, and most of the knowledge points are connected.

To prepare for the exam, fire engineers must first understand the test subjects and test question types, know themselves and their opponents, and be invincible; Secondly, be targeted, follow the outline, in order to get twice the result with half the effort! Finally, to do the question, do the real question. It is easy to have a low eye and a high hand if you don't practice, and many subjects of fire protection need to strengthen your memory in doing questions.

Dali Education reminds that to prepare for the fire engineer exam, technical practice is the key, technical practice is the foundation of fire protection courses, learn technical practice, fire protection three courses will naturally be passed.

1. Regular learning status.

Maintaining a regular study state before the exam is crucial to pass the exam, which requires candidates to spend about three hours a day on revision, focusing on the high-frequency test points of each subject and the knowledge points of fire engineers that have been published over the years. And pinch the points to do the fire engineer past questions, and study the knowledge points in the past questions. The mistakes accumulated in the past should be reviewed regularly, and the combination of the three should be gradually cycled to gradually advance the learning progress.

2. Upward psychological state.

Mood directly affects the state of learning, many candidates are prone to anxiety before the exam, and the questions cannot be done, the book cannot be read, and the precious preparation time is wasted. In order to improve the efficiency of review and preparation, candidates need to maintain a positive learning attitude, face various problems in preparation with an invincible mentality, and overcome the problems one by one.

3. Healthy physical condition.

Preparing for the fire engineer exam is a mental and physical thing, as the so-called body is the capital of the revolution, it is important to maintain a healthy physical condition before the exam.

Some candidates are accustomed to raiding before the exam, reading at night in the last few days, sleeping only three or four hours a day, and studying for a long time is easy to produce brain fatigue, which is not only not conducive to preparing for the exam but will affect the development of normal work and life. Therefore, candidates should try to ensure 7-8 hours of sleep and maintain a healthy body to meet the exam.

Only with a good study, physical and mental state can you avoid worries and go all out to sprint for the exam.