How to revise for the fire engineer exam most efficiently?

Hello, we are happy to answer your questions.

Practice a lot and be able to answer questions (October).

The fire exam questions are flexible, which requires us to practice more before the exam, simulate more + do real questions. At this stage of practice, don't look for some basic chapters and fill-in-the-blank multiple-choice questions, choose a certain depth and a set of mock questions, conduct mock exams according to the requirements of the exam time, and carefully analyze the wrong questions after each set of questions, so as to draw inferences from one another. You can also take out the past year's past papers and do them carefully, and be familiar with the question type, difficulty and ideas of the past questions.

Prepare and answer the past questions (November).

Before the test, plan and arrange the place to eat and lodging, prepare the tools and admission ticket, and calculate the distance and departure time of the test room. I can't understand people who are late for the exam, I can only think that you didn't study well enough, and the exam is just to feel the atmosphere and question type of the exam. Otherwise, how could he be so irresponsible to himself, usually studying hard day and night, fighting for hundreds of days, and pinching this time after the exam.

The night before the exam, be sure to verify whether you have all the required things such as ID card, admission ticket, test center, 2B pencil, eraser, watch, etc. (it is recommended that you buy a mechanical watch during the exam, **You can buy one for more than 20 yuan, it is very important to master the time during the exam, especially the case). Check again before going out in the morning, send the test papers and answer sheets, don't rush to do the questions, fill in the exam information (name, admission ticket, etc.) first. Relax and answer questions without being influenced by other circumstances.

Finally, I wish you all the best of luck in passing the exam.

Read every morning

I remember that a student said last year that when he took the exam, he rushed to the school examination room early at 7 o'clock, only to find that the teaching building was full of people reading aloud with specifications or other materials. He was ashamed to brush Weibo and post a circle of friends, so he also took out the book and read it, and it took about 40 minutes to help him improve his score by at least 3 points.

Morning reading may not be memorable, but it will at least give you an impression of the test center. It is recommended that candidates get up early in the last few days and read the regulations or textbooks for more than half an hour every morning.

Do the questions every day

The purpose of doing the questions is to stay in shape, not to be too nervous, and not to be too relaxed. Do 50-80 questions a day, combining difficulty and ease. There is no need to stumble on some off-the-beaten-path questions, such as the calculation of air leakage volume, the calculation of dry powder fire extinguishing agent, etc.

It focuses on the calculation of fire zones, evacuation width (or distance), fire water consumption, fire extinguisher configuration level, building height calculation, etc. These calculation questions will be tested more or less, and they should not be taken lightly.

Get to the point

At this time, let's stop stumbling on some non-key content, and focus on building fire prevention and fire protection facilities.

The fire prevention part of the building is the key point and must be firmly grasped; The other places focus on the contents of the three chapters of gas stations, garages, garages, garages, and civil air defense projects; It is recommended not to look at the water mist, dry powder, and urban remote monitoring system for fire protection facilities, and those who do not learn well can focus on understanding the relevant concepts of foam and the design requirements of foam systems.

Review the mistakes

There are many reasons for doing the wrong question, it may be a bad foundation, or it may be accidentally falling into a pit. It is recommended to re-sort out all the wrong questions that have been done, and it is recommended to copy the provisions that are not reliable enough to grasp in a small book. When the provision is fully understood, it is crossed out.

Review past papers

It's never too late to study the real questions, judging from the propositions of the past three years, many test points will still be examined repeatedly, and the real questions of the three subjects must be reviewed again. In the process of revision, we should understand the starting point of the proposition and how the proposition teacher digs the pit.

The difficulty of the fire exam questions varies greatly every year, so don't believe the rumor that the difficulty of the registered fire exam will be waterproof. In addition, even if the difficulty of a first-class registered fire engineer will be reduced, the first to profit will be those candidates who work hard and study in a down-to-earth manner.

1. Schedule.

If you don't have a lot of time, it is recommended that you spend 2-3 hours studying on weekdays! It's hard to arrange 5-8 hours of preparation for the exam during holidays.

2. Improve efficiency.

The exam for fire engineers is relatively difficult, and the chances of self-study and clearance are very low! Due to the fact that there are too many knowledge points that candidates need to master and the learning time is limited, Sendong Online School recommends that you register for a class to study, so that there will be a professional one-on-one teacher to track and guide the learning, and the study plan will be arranged according to your time, so as to improve the learning efficiency!

3. Giving up the luck mentality is the beginning of passing.

We must give up the psychology of taking shortcuts, it is not advisable to bet on such a thing, otherwise the pass rate will not be so low! The learning materials of the network disk are uneven.,There will be a lack of text and short chapters.,Every time you change a kind of information,The memory will be rearranged.,Disrupt the original plan.,Thus wasting the previous effort! It is recommended to choose a formal training institution (which can help you sort out your thoughts and prepare for the exam efficiently), and beware of being deceived!

The preparation for the 2018 first-class registered fire engineer exam is underway, and many candidates must be nervous about preparing for the exam, but for the registered fire engineer exam, many candidates have the impression that it is difficult! So, when preparing for the 2018 Class 1 Registered Fire Engineer exam, how can we quickly grasp the major difficulties?

1. Don't memorize.

If you want to memorize something, it is certainly necessary to study and review it many times, but it is always counterproductive and useless to be mechanically passive, to act on orders, and to memorize by rote without knowing how to do it.

2. Advocate repetition of memory.

Only by constantly repeating and memorizing the content that has been reviewed can you memorize the knowledge points. Especially in the case of a lot of review content, we need to repeat the memory, so that we can remember the knowledge points and face the exam easily.

3. Strive to cultivate interest in learning.

Remember what you have learned, and pour all your feelings into it, and the deeper the love, the more you will remember it. Be good at discovering what interests you and give it all your love. If you are interested, you will drill deep, and if you drill deep, you will understand it thoroughly, and if you understand it thoroughly, you will naturally remember it.

Orange Internal Training will accompany you all the way, and I wish you a happy study in the online school!

1. Regular learning status.

Maintaining a regular study state before the exam is crucial to pass the exam, which requires candidates to spend about three hours a day on revision, focusing on the high-frequency test points of each subject and the knowledge points of fire engineers that have been published over the years. And pinch the points to do the fire engineer past questions, and study the knowledge points in the past questions. The mistakes accumulated in the past should be reviewed regularly, and the combination of the three should be gradually cycled to gradually advance the learning progress.

2. Upward psychological state.

Mood directly affects the state of learning, many candidates are prone to anxiety before the exam, and the questions cannot be done, the book cannot be read, and the precious preparation time is wasted. In order to improve the efficiency of review and preparation, candidates need to maintain a positive learning attitude, face various problems in preparation with an invincible mentality, and overcome the problems one by one.

3. Healthy physical condition.

Preparing for the fire engineer exam is a mental and physical thing, as the so-called body is the capital of the revolution, it is important to maintain a healthy physical condition before the exam.

Some candidates are accustomed to raiding before the exam, reading at night in the last few days, sleeping only three or four hours a day, and studying for a long time is easy to produce brain fatigue, which is not only not conducive to preparing for the exam but will affect the development of normal work and life. Therefore, candidates should try to ensure 7-8 hours of sleep and maintain a healthy body to meet the exam.

Only with a good study, physical and mental state can you avoid worries and go all out to sprint for the exam.

The first-level fire engineer exam is very extensive, basically covering the content of the entire textbook, without obvious focus, and it is still important for candidates to be familiar with the textbook. In the process of reading the textbook, mark the content that you think is important, although the three books are very thick, but many of them are common and coherent, you must learn to integrate them yourself, put the similar and easily mixed knowledge together, compare and distinguish, so as to accurately grasp the knowledge points. Then, according to your actual situation, you will decide whether you need to participate in the training course.

Review the questions from easy to difficult, enhance your problem-solving ability by doing questions, study the real questions, do the real questions thoroughly, and finally keep a normal heart, meet the exam, and help you succeed in the examination!

Just read the book, do the questions in the book, you can understand the questions in the book, it's okay, the principle is the same, just a little change, if there is still time, and then expand the difficult questions, the college entrance examination is to test those things, check what is the key content of the previous exams, grasp the key points, and the key points that the teacher said are also more important, calm down, the college entrance examination is just an exam, what determines the exam of life.

Hello, everyone's habits and applicable learning methods are different. It's up to you. There are still a few years before the first exam, and the textbooks and syllabus are very important, and you can also refer to the guidance of each online school.

There is a fixed time to review every day, and it is better to have a teacher with a sure effect, and you can also buy last year's intensive lectures to see, which is cheap and affordable. Past questions must be thoroughly studied, good luck!

In preparing for the first-class fire engineer exam, you must pay attention to the following issues.

01. Don't blindly brush the questions.

02. I think I have a firm grasp of knowledge.

As mentioned in the previous article, after the knowledge is firmly grasped, you can brush the questions to consolidate the knowledge. So what does it mean to have a solid grasp of knowledge? Many candidates memorize it or listen to it once, and then do a good job in the questions, and think that they have mastered it well.

In fact, for the fire engineer exam, the key basic knowledge needs to be mastered by the degree of proficiency. For example, how to test whether you have a firm grasp of the knowledge point of "fire partitioning"? Take a blank piece of paper, can you write it silently, and whether the various building categories, factories, warehouses and civil buildings can be written silently?

If not, it means that it is not skilled enough and needs to be strengthened. Another example is the facility article, whether the setting place of self-spraying can be proficient in silent writing. Therefore, don't ignore the mastery of key basic knowledge, when you reach the level of mastery, a lot of complex knowledge will be solved!

03. Ignoring the establishment of the framework.

Many test takers often complain that they understand the knowledge, why are they easy to make mistakes when doing the questions? In fact, on the one hand, the knowledge is not firmly grasped, and on the other hand, there is no knowledge framework, so how to establish a knowledge framework? It's still the old way, take out a piece of paper and write, as the saying goes, a good memory is better than a bad pen, this truth has been tried and tested repeatedly.

For example, "safe evacuation", including several contents, there are several parameters, the three parameters of the steady fire "Xiaomi, big money, and close distance" have basically summarized all the content of the safety evacuation, and extend the specific knowledge points from these three parameters, how the specific knowledge points are stipulated, and how these knowledge points are related to each other, this is the framework, in this large framework step by step to fill in the specific knowledge, I believe that according to this template to review, there will be no more cases where the knowledge points will not be used flexibly.

04. Case study and question making method.

Many candidates have heard others say that case analysis has to be done, but they don't know exactly how to do it. It's just to find a few questions to do, but in fact, how to do the questions also has to pay attention to ways and methods. As we all know, case analysis is the focus of learning fire engineers, but also the difficulty, how to do case analysis?

The teacher requires us to do the questions at the specified time, such as the case analysis practical class of Wenwen Fire Fighting, which requires us to answer the questions within the specified time, set a time limit, and simulate the real situation of the exam. Don't do it if you can't finish it, find the reason, why you can't finish it; If you don't do it well, don't turn the book, find out the reason, why it won't, and how to strengthen it. In this way, the test situation is simulated to do the questions, which not only exercises the mastery of knowledge points, but also the ability to respond on the spot and the ability to resist psychological pressure.

Avoid eye-to-eye and low hands. In the last month, we had to take a set of case analysis mock questions (six big questions) every day and spend three hours to do the questions, just like the exam, to find out the weak links and target each breakthrough.

In 2018, there are not a few zero-based candidates in the first-class fire engineer applicants, but everyone is also aware of the gold content of the fire protection certificate and how much advantage it will bring to their career choice. Recently, candidates who are preparing for the 2018 fire protection exam also asked, "I am a beginner, how can I start to study for the exam?" In order to help you find the right direction for exam preparation as soon as possible, I will share the study methods with you below.

1: Make a study plan.

The development of a study plan is very helpful for our revision, because only when we have a study plan can we be motivated to move forward step by step, so as to study more targeted, which can also save more time. Generally speaking, you can formulate plans with different focuses according to the characteristics of each preparation stage, and constantly revise and improve them according to the actual situation in the process of learning. At the beginning, you should make a list of basic exam preparation frameworks, allocate study tasks reasonably, and pay attention to setting aside a certain amount of time every day to deal with some things in life and work.

2: How to read the textbook.

We all know that there are three textbooks for the first-level fire engineer examination, fire safety technical practice, fire safety technology comprehensive ability, and fire safety case analysis. The content of the three textbooks is closely linked and complements each other, and the syllabus divides the content in the textbooks into three levels: mastery, familiarity, and understanding. The syllabus requires that you must take time to read more knowledge points, and the designated textbooks for the exam contain the scope of propositions and the standard answers to the exam questions, and all the questions raised in the exam must be answered according to the content, views and requirements of the specified textbooks for the exam, otherwise the exam will not pass.

At present, we have not received the notice of the revision of the textbook in 18 years, and under normal circumstances, the release of the new textbook is around June, and it is recommended to still use the 16th edition of the textbook with a blue cover.

3: How to listen to lectures and do questions.

It is also essential to do questions and listen to lectures, but in fact, whether it is a tutorial course or an exercise, the ultimate goal is to let everyone better grasp the textbook. A suggestion for everyone, first go to the textbook to preview and find out what questions you don't understand, and then go to the tutorial to see how the teacher explains these problems, it is recommended to figure out the questions that you understand thoroughly and do not understand, and then do the questions, don't focus on whether you do it right, mainly look at the solution ideas and answering skills. At the same time, the reasons for the mistakes should be analyzed and recorded in the error book, which is also convenient for the later review to memorize again.

There will be difficulties in preparing for the fire protection exam with zero foundation, but as long as everyone is willing to do it with heart, all difficulties will no longer be difficult.