Macbook novice installation windows7 no sound!! 10

Updated on technology 2024-02-09
19 answers
  1. Anonymous users2024-02-05

    Use the driver life check the driver update to see if there is a sound card driver installed, and the driver is really not good, go to the repair shop to see if there is a problem with the hardware.

  2. Anonymous users2024-02-04

    Enter the Windows system, insert the system disk of your own Mac OS X (it must be a system disk, not that application) Double-click the optical drive to reinstall all the drivers in the disk (it is automatic).

  3. Anonymous users2024-02-03

    Resolution.

    2. Similarly, if there is no sound in the microphone, enter the level column in the recording tab and keep the sound sample icon as normal.

    4. Check whether the sound service of win7 is disabled, right-click the computer item in the start menu, select management, enter the service options, and find the windows audio item to make sure it keeps it started.

  4. Anonymous users2024-02-02

    3. Select the coreaudiod process, click the Exit Process button in the upper left corner of the Activity Monitor window, and click Exit in the pop-up dialog box.

    4. The coreaudiod process will automatically restart after exiting, and the sound will be restored.

  5. Anonymous users2024-02-01

    Is there a mounted drive?

    It seems that the hardware of Mac is very different, and Win7 may not have all the native drivers.

  6. Anonymous users2024-01-31

    Click on the lower right corner to show the hidden icon, that is, there is a small triangle upward, and there is a gray prism inside, click on it to appear Boot Camp Control Panel, click on it, select the keyboard, and then remove the checkmark and click on the application (the premise is dual system).

  7. Anonymous users2024-01-30

    Description: Win7 does not correctly recognize the sound card, and install the driver, can be solved with the help of third-party software, take the driver wizard as an example, the operation is as follows:

  8. Anonymous users2024-01-29

    win7 is too advanced,I don't know your sound card,In other words, your sound card is too old,The old win7 doesn't know it。

    PS: Actually, Win7 is a 64-bit operating system, XP is 32-bit, so it should be said that your sound card is 32-bit normal, 64-bit is not supported, I think it should be like this.

  9. Anonymous users2024-01-28

    Because Apple laptops don't have a sound card driver:

  10. Anonymous users2024-01-27

    Mine has also had this situation、Go to customer service to install the original driver。

  11. Anonymous users2024-01-26

    I'm in the same situation, solving

  12. Anonymous users2024-01-25

    This is due to the fact that there is no driver corresponding to the sound card under win7,You can do it with the help of software such as driver wizards,The operation method is as follows:

  13. Anonymous users2024-01-24

    Win7 I tried it before and the interface is beautiful. However, there are still many software that are not compatible. Or switch back to XP. However, there has been no such phenomenon.

    You start by taking a closer look at your sound output line. Hehe. It is very likely that the problem here is that you should take a closer look inside the sound management to see if it is muted.

    Then try to update the sound card driver, pay attention to find the one marked as win7, and it is divided into 32-bit and 64-bit.

    If you can't try to change the sound card, you can't honestly install it back to XP.

  14. Anonymous users2024-01-23

    It is not recommended that you install Windows 7 at this time

    There is no sound because you don't have a driver installed.

    And the official driver has not yet come out.

    So it's best to wait for the official version to be released, and Apple will also release the corresponding driver.

  15. Anonymous users2024-01-22

    The sound is gone, so use a toothpick to get it on the headphones. The red light went out. Just ko!!

  16. Anonymous users2024-01-21

    There is no sound under the apple computer win7, and the headphone jack lights up red, which is a short circuit caused by pulling out the headphones. Use the headset head, toothpick or paper clip to touch the contact point inside the earphone, and then press the keyboard sound switch a few more times, the circuit is turned on and the red light is off, and the sound is KO !!

  17. Anonymous users2024-01-20

    Focus on checking the driver and settings. But your Apple machine with Microsoft's system is not always very good.

  18. Anonymous users2024-01-19

    If you can hear the headphones under the Mac system, then you can see if there is a problem with your output settings under Win, and then look at the driver.

  19. Anonymous users2024-01-18

    Check the settings first, and if the settings are okay, change the headphones.

Related questions
9 answers2024-02-09

The detailed operation steps of installing win10 dual system under win7 are as follows: >>>More

6 answers2024-02-09

The first step is to make a boot disk.

Note: The boot disk here must be made in the UEFI version! How to make it look at the top. >>>More

11 answers2024-02-09

If you can't recognize the hard disk, you need to load the NVMe driver! ** Samsung's NVMe driver on the Internet,Then press F2 when you install it,Select this driver,That's it,I had a Lenovo yoga900 notebook before,Reinstall the system and kill me,I can't identify the hard disk all the time,I can't identify it when I enter PE,It's no problem to load the NVMe driver later!

5 answers2024-02-09

1. Check whether there is an error in the system disk file system >>>More

7 answers2024-02-09

Are you from the online ** win7 image file? If so, you can directly unzip it and install the hard drive. Extract the win7 image file into a folder without Chinese name, enter in, find an icon with onekey or setup written on it, open it, and just bring it up. >>>More