How to flash vivo Xplay5?

What problems do you encounter in the use of your mobile phone and need to flash it? If you need to flash the system to upgrade the system, we recommend that you perform the following steps:

1) Back up the important data in your phone first. (2) Enter the official website of vivo - Service - fill in the mobile phone model, and search for the firmware upgrade package of the corresponding mobile phone model. (3) ** Do not unzip after good, store directly in the root directory of mobile phone storage, and then go to vivo official website - community - section to search for "vivo mobile phone Chinese recovery operation guide", follow the tutorial in the post.

2.Open the line brush, switch to the one-click brick rescue interface, and click the "OK" button after completing the "Confirm steps before flashing".

3.If you have a local brushless package, you can enter the model in the search box, click the "Search ROM" button, and click the "One-click Flash" button in the search results to start flashing the package-**After completion, click "Flash Now" to start flashing:

4.If there is already a flash package locally, click the "Select Local ROM" button to open the interface for selecting a RAM package, and click the "Open" button after selecting the flash package

5.Enter the parsing package page

6.After the unpacking is complete, start scanning the flashing port:

7.Install the flashing driver:

If it is the first time to start the line brush, or you have not installed the flash driver, please click "Fully automatic installation of the flash driver":

Enter the installation driver interface, if the Windows security prompt pops up, click "Always install this driver software":

8.After installing the driver, if the port cannot be scanned for a long time, you can manually enter the flash mode according to the interface operation guide

10.Jump to the flashing success interface, and the flashing is complete!

vivo iqoo mobile phones can overwrite data to another mobile phone through the one-click change function of mutual transfer

1. Open "Mutual Transfer" - one-click phone change;

2. Select "I am an old mobile phone" for the data transmitter - select "I am a new mobile phone" for the data receiver - select the mobile phone brand - wait for the identification to be completed or scan the interface *** connection - agree;

3. After the connection is completed, select the data to be transferred, confirm it, and click "Start Transfer".

One-click change supports the transfer of contacts and contact blacklist (two vivo mobile phones can transfer contact avatar, contact number, contact company, contact position, others are not supported), call logs, messages (do not support the transmission of MMS), schedule, notes (only support vivo mobile phones, third-party phone replacement is not supported), wifi password, WeChat data (only between vivo mobile phones), vivo account, system settings (excluding face, lock screen password and fingerprint), Application, **, **, **lead digging, recording (currently only supports transmission between vivo mobile phones).

Note: 1. One-click exchange of encrypted files and data for land travel machine, which needs to be supported by file management in and above versions and mutual transfer in and above versions; You will need to enter a privacy password when transferring.

The account and password set by the mobile phone device can be cleared by flashing, and of course, the user can also re-apply for the mobile phone account to use, which can avoid the problem that the mobile device cannot be used normally.

Flashing is risky and needs to be operated with caution, the following are the steps to flash:

1. First of all, the hand punch is in the shutdown state, and its scatter key is pressed at the same time as the shutdown button and the volume up button until the screen appears "Restore factory settings", and then select Recovery Mode.

2. Next, a small green robot will appear on the screen, touch the home button to enter recovery mode.

3. Next, select the third and fourth ones: Wipe Data Factory Reset and Wipe Cache Partition.

<>5. Start flashing.

6. Select "Reboot System Now" to restart the phone, and then the chain flashing is completed.

vivo phonesRoot is not supported, hence the vivo xplay5a phoneYes, it is not possible to get rootYes, it's becauseRooting your phone will have the following adverse effects

OneThe phone is abnormal: After the root is opened, it is easy to change or delete the system files by mistake, which may cause the phone to crash, restart, abnormal use and other problems;

IISafety hazards: Some illegal programs will cause privacy leakage and cost loss of mobile phones without knowing it;

IIIThe system cannot be upgraded

FourthNo warranty is available:Hardware problems caused by root are not warranted after sale.

Use the one-click root function of Qitu to root directly, vivo officially restricts root, so it may not be possible to root successfully.

Root is unsuccessful,Brush into a root of the official lite package,Of course, at this time you have to flash into a third-party recovery,These links can also be done with one click。