The suffix is img how to flash the machine,

Card Swiping: With a memory card.

SD, TF and the like) to flash the machine, card swiping process:

of the root directory. Three, turn off the phone and remove the SIM card.

After the memory card is installed, it is recommended that the important things in the memory card should be backed up.

Fourth, when the power is off, press the power button and the volume plus button at the same time, about ten seconds, and then let go.

Fifth, enter the recovery mode, which is the REC mode.

Sixth, select wipe cache partition to clear the cache.

7. After clearing the cache, select Wipe Data Factory and restore the factory settings.

8. Select "install zip from sdcard" first, the power button is OK, and then select apply sdcard:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.

It is usually swiped in through the adb tool.

What model you have, there is generally a recovery tutorial.

Watching the tutorial is the safest.

Method 1: Turn on the phone and enter the system state, use the [Mobile Uncle Toolbox] soft and quiet, and flash into the [third-party recovery mode], the specific steps are as follows:

On the phone that has successfully obtained root permissions, **Install the [Mobile Uncle Toolbox] software, use the [Mobile Uncle Toolbox] software, and flash into the recovery mode

1.Search for third-party files that match the signal of your personal mobile phone brand and model on the Internet (recommended mobile phone brand official website, Android NetMachine, Forum, and network disk), and copy and paste them in the mobile phone SD card card root (card root: that is, copy and paste directly in the SD card, and the file cannot be placed in the folder directory).

2.Successfully obtain the root permission of the Android system of the mobile phone.

4.Use the [Recovery] function of [Mobile Uncle Toolbox] [Import files on SD card] OK Reboot After restarting, it will automatically enter recovery mode and the flashing is completed. After entering the recovery mode, press the volume key to toggle the options; Press the power on button to confirm and perform the operation.

Method 2: When the phone is turned off.

1: Enter fastboot mode;

2: Connect the mobile phone to the computer with a data cable;

3: The computer automatically identifies the loading driver;

4: Find the recovery package, run it, and flash it into recovery.

Ways to enter recovery mode on your phone:

Method 1: If the phone is powered on, please turn it off first, and in the case of power off, press and hold the power (hang-up button) + small house (home) button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery boundary rock trace appears.

Here's how to brush it in:

Using the [Mobile Uncle Toolbox] software, flash in [Recovery], the steps are as follows:

On the mobile phone that has successfully obtained root access, **Install the [Mobile Uncle Toolbox] software, use the [Mobile Uncle Toolbox] software, and flash into the recovery mode

1.Search for third-party files that match the signal of your personal mobile phone brand and model on the Internet (the official website of the recommended mobile phone brand, Android Netjifeng Forum, and the network disk), and copy and paste them in the mobile phone SD card card root (card root: that is, copy and paste directly in the SD card, and the file cannot be placed in the folder directory).

2.Successfully obtain the root permission of the Android system of the mobile phone.

4.Use the [Recovery] function of [Move Uncle Burn Noisy Uncle Yu Toolbox] [Import files on SD card] OK Reboot After restarting, it will automatically enter the recovery mode and the flashing is completed.

After entering the recovery mode, press the volume key to toggle the options; Press the power on button to confirm and perform the operation.

Method 2: Brush the original system by line, and the recovery mode will automatically restore the brand that comes with it.

Ways to enter recovery mode:

Method 1: If the phone is turned on, please turn it off first, and in the case of power off, press and hold the power (hang-up button) + small house (home) button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

You can use the Brush Master or the Brush Wizard to get in.