What are the engineers who need to be equipped with Class C qualification for power transmission and

The engineers required for the C-level qualification for power transmission and transformation in power design are: 1 person for registered power generation, transmission and transformation, 1 person for registered secondary structure, 1 person for estimated budget middle engineer, 1 person for communication senior engineer, 1 person for electric power senior engineer, and 1 senior engineer for general planning.

Registered power generation, transmission and transformation 50-550,000 for three years.

Register the secondary structure for 20-270,000 a year.

The estimated budget is 10,000 per year.

Communications High Engineer 10,000 a year.

Electricity high engineering 10,000 a year.

The total plan is 4-50,000 a year.

Application process: Handle the qualification process.

The first step is industrial and commercial registration.

Step 2 Purchase the software (Beijing Construction Information Source Company).

Step 3 Staffing and information entry.

Step 4: Prepare the reporting materials (apply online and print out the reporting materials), and Step 5: Submit the materials.

Step 6 Approval (approval process) Municipal Construction Commission or Municipal Planning Commission - Provincial Construction Department.

Second, the main types of talent services:

1. First and second class registered architects.

2. First and second class registered structural engineers.

3. Registered electrical (power generation, transmission, power supply and distribution) engineer.

4. Registered utility (water supply and drainage, HVAC, power) engineer.

5. Registered geotechnical engineer and registered urban planner.

6. Registered chemical engineer, registered supervisor, registered cost engineer, registered consultant.

7. First-class registered constructor (construction, municipal, mechanical and electrical, highway, railway, communication, water conservancy and hydropower), etc.

8. All kinds of middle and senior engineers (general drawing, protection, chemical defense, garden, electric power, communication, building, structure, electrical, HVAC, water supply and drainage, surveying, surveying and mapping, environmental protection, environment, budget estimate), etc.

If you don't understand anything, you can consult me, I have been engaged in this for 5 years.

6 qualifications in the power industry (Grade C for power transmission and transformation design).

1 registered electrical (power generation, transmission and transformation); 1 second-level structural engineer; 1 in the estimated budget; 1 senior engineer of power system; 1 senior engineer of communication protection, 1 senior engineer of general planning; 6 in total. The leading majors are: power generation, transmission and transformation, structure, power system, and communication protection are 4.

To apply for a professional Grade B qualification unit for power design (power transmission and transformation engineering), the registered capital must reach 100W, the professional equipment is complete and reasonable, and the number of main professional and technical personnel is not less than the number specified in the qualification declaration standards

There are 3 registered electrical engineers (power generation and transmission), 1 (1 registered structural engineer, 2nd class registered structural engineer, 2nd class registered architect, intermediate HVAC engineer, intermediate water supply and drainage engineer, intermediate budget estimation engineer, senior power system engineer, senior communication protection engineer, and senior general plan engineer).

Materials that enterprises need to provide when applying for Class B qualification for power transmission and transformation engineering:

1) Application form for engineering design qualification;

2) A copy of the business license of the enterprise legal person and partnership;

3) Articles of Association or Partnership Agreement;

4) The identity certificate of the legal representative and partner of the enterprise;

5) The identity certificate, employment documents, graduation certificates, professional title certificates and materials required by relevant qualification standards of the person in charge of the enterprise and the technical person in charge;

6) The identity certificate and registered practice certificate of the registered practitioners listed in the application form for engineering design qualification;

7) Title certificates, graduation certificates, identity certificates and personal performance materials of non-registered professional and technical personnel required by engineering design qualification standards;

8) Proof of termination of employment labor contract between registered practitioners and other professional and technical personnel required by engineering design qualification standards and the employment contract of the original employer and the employment labor contract of the new unit;

9) Other relevant materials required by qualification standards.

If you are not familiar with the qualification application process and need assistance in passing the qualification declaration, you can consult me at any time.

Grade C qualification standard for power industry (power transmission and transformation engineering): 3-1 Qualifications and reputation (1) It has the qualification of an independent enterprise legal person. (2) Good social reputation, registered capital of not less than 500,000 yuan.

3-2 Technical conditions(1) The professional equipment is complete and reasonable, and the number of main professional and technical personnel shall not be less than the number specified in the main professional and technical personnel allocation table in the professional qualification standards applied. (2) The main technical person in charge or chief engineer of the enterprise shall have a college degree or above, more than 10 years of design experience, and have presided over no less than 2 engineering designs of the corresponding professional design type of the applied industry, and have intermediate or above professional and technical titles. (3) Among the personnel specified in the main professional and technical personnel allocation table, the non-registered personnel of the leading specialty shall preside over no less than 2 project engineering designs of the corresponding professional design type of the applied industry as the professional and technical person in charge.

3-3 Technical equipment and management level(1) Have the necessary technical equipment and a fixed workplace. (2) There is a relatively complete quality system and technology, operation, personnel, finance, archives and other management systems. The required personnel are as follows; 1. Registration, power generation, transmission and transformation 12, secondary structure 13, power system senior engineer 14, communication protection senior engineer 15, general plan transportation senior engineer 16, budget estimate 1 application procedure 1, purchase survey and design system lock 2, find the required personnel, registered engineers for pre-registration, and professional title personnel for performance arrangement; 3. The personnel are in place and start to sort out the materials, and the list of materials is as follows:

1) "Application Form for Qualification of Engineering Survey and Engineering Design Enterprises" in quadruplicate and corresponding electronic documents (including basic information forms of enterprises); (2) A copy of the copy of the business license of the enterprise legal person; (3) A copy of the articles of association; (4) A copy of the identity certificate of the legal representative of the enterprise and the identity certificate of the technical person in charge of the enterprise or the chief engineer, a copy of the employment documents, graduation certificates, professional title certificates, etc., and a copy of the "basic information and performance table of professional and technical personnel"; (5) A copy of the identity certificate of the registered practitioner listed in the application form, and a copy of the registration certificate stamped with the practice seal (the newly approved enterprise shall provide the registration change form or initial registration form stamped by the provincial registration management department of the place where the enterprise is registered); (6) Copies of professional and technical personnel's identity certificates, professional title certificates, graduation certificates, etc., "basic information and performance table of professional and technical personnel" and labor contracts signed with enterprises in accordance with the law, and copies of social security certificates for nearly one month (the newly approved enterprises provide proof of termination of employment labor contracts with the original employer); (7) The property right certificate of the office space or the lease contract of the office space for more than one year; (8) Proof of enterprise performance, including a copy of any relevant information in the certificate of project completion, project handover, project trial operation, and project completion acceptance (provided by the enterprise applying for upgrade and continuation); (9) The technical equipment of the enterprise with qualification requirements shall provide a copy of the shopping invoice (provided by the enterprise applying for engineering exploration qualification).

Grade C power design qualification for power transmission and transformation requires personnel, and our company can provide all full-time and upright personnel!

1) It has the qualification of an independent corporate legal person.

(2) Good social reputation, registered capital of not less than 500,000 yuan.

Grade C qualification for power transmission and substation engineering design.

Registered electrical power generation and transmission 100,000 a year (1 person).

Registered Level 2 Structural Engineer 30,000 a year (1 person).

General Drawing Senior Engineer 20,000 a year (1 person).

20,000 years of senior engineer in electric power (1 person).

The estimated budget of the project economy is 20,000 yuan a year (1 person).

20,000 senior engineers of communication protection (1 person).

Qualification process:

1. Industrial and commercial registration;

2. Purchase the system of the Ministry of Construction or the Department of Construction;

3. Staffing and registering personnel;

4. Prepare the reporting materials (online declaration and print to form paper materials);

5. Submit the information of the qualification applicant;

The personnel required for Class A qualification for power transmission and transformation engineering are as follows:

6 registered power generation, transmission and transformation.

3 registered first-level structures.

1 registered second-class building.

1 registered secondary structure.

HVAC Intermediate 1.

1 intermediate level of water supply and drainage.

Intermediate budget estimate: 2 people.

2 senior in power system.

2 senior communication protection winners.

2 senior in general drawing.

Environmental protection intermediate: 1.

Qualification process:

The first step is industrial and commercial registration.

The second book purchases software (Beijing Construction Source Information****) The third step is to allocate personnel and register personnel.

Step 4: Prepare the reporting materials (apply online and print out the reporting materials), and Step 5: Submit the materials.

Step 6 Approval (Approval Process) Municipal Construction Committee - Provincial Construction Department.

The detailed list of qualification declarations is as follows:

1) Application form for engineering design qualification;

2. A copy of the business license and the articles of association;

3. Relevant certificates of enterprise legal person, technical person in charge, registered engineer and non-registered engineer. For example: identity certificates, academic certificates, professional title certificates, performance certificates, etc., which items are needed, and the standard number can be seated, especially pay attention to the social security certificate of professional and technical personnel, which is also within the scope of inspection;

4. Proof of the company's business premises.

Substation engineering (Grade B) qualification staffing;

Registered electrical (power generation, transmission and transformation) 3 15-180,000 3 years.

1 second-level registered structural engineer 40,000 3 years.

1 second-class registered architect 30,000 3 years.

1 HVAC intermediate engineer 7000 per year.

1 intermediate title of water supply and drainage, 7000 per year.

The estimated budget is 1 7,000 per year.

1 18,000 senior engineers in the power system.

Communication protection senior engineer 1 18000 per year.

1 50,000 senior engineers per year.

The total number of personnel with Class B qualification for substation engineering (11).

Qualification process:

1. Industrial and commercial registration;

2. Purchase the system of the Ministry of Construction or the Department of Construction;

3. Staffing and registering personnel;

4. Prepare the reporting materials (online declaration and print to form paper materials);

5. Submit materials;

6. Examination and approval (approval process) Municipal Construction Commission - Construction Department - Ministry of Construction - publicity.

The three grades show a decreasing trend, with more requirements for grade A and 5 requirements for grade C.

Provide a large number of personnel required for power design, architectural design, water conservancy industry, survey and other industry qualifications;

There are architects, structural engineers, registered electrical, registered geotechnical, registered planners, registered builders, etc. Intermediate and senior professional titles in various majors: general drawing, electric power, geotechnical, gardening, surveying, communication protection, power system, thermal control, water and electricity heating, architecture, structure, planning, geology, immigration, water conservancy and hydropower, soil and water conservation, etc.

Grade A power transmission and transformation project in the power industry.

6 registered power generation, transmission and transformation.

1 registered second-class building.

3 registered first-level structures.

1 registered secondary structure.

HVAC Intermediate 1.

1 intermediate level of water supply and drainage.

Environmental protection intermediate: 1.

Intermediate budget estimate: 2 people.

2 senior in power system.

2 senior communication protection winners.

2 senior in general drawing.

22 in total.

Hello, the Class A qualification, Class B qualification, and Class C qualification for power transmission and transformation engineering design require personnel respectively, as follows.

Power industry: power transmission and transformation (A, B, C), new energy (B), thermal power (B), and thermal power (B).

1. Power transmission and transformation engineering design (C) level: 6 (2 registered personnel and 4 professional title personnel).

1) Registered personnel: 1 registered power generation and transmission engineer, 1 secondary structural engineer.

2) Professional title personnel: budget estimates, power system senior engineers, communication protection senior engineers, general plan senior engineers (1 each).

2. Power transmission and transformation engineering design (B): 12 (6 registered personnel and 6 professional title personnel).

1) Registered personnel: 3 registered power generation and transmission, 1 first-class structural engineer, 1 second-level structural engineer, and 1 second-level architect.

2) Professional titles: HVAC engineer, water supply and drainage engineer, budget estimate, power system senior engineer, communication protection senior engineer.

General Engineer (1 each).

3. Power transmission and transformation engineering design (A): 22 (11 registered personnel, 11 professional title personnel).

1) Registered personnel.

6 registered power transmission and transmission personnel.

There are 3 first-class structural engineers.

1 second-level structural engineer;

1 second-class architect.

2) Title personnel:

1 HVAC worker

Water supply and drainage medium worker 1

1 middle engineer in environmental protection

There are 2 workers in the estimated budget.

There are 2 senior engineers of power system, 2 senior engineers of communication protection, and 2 senior engineers of general planning.

4. New energy power generation design (B): 18 (7 registered personnel and 11 professional title personnel).

1) Registered personnel: 1 registered power, 4 registered power generation and transmission, 1 first-class structural engineer, and 1 second-level architect.

2) Professional titles: HVAC engineer, water supply and drainage engineer, water conservancy and hydropower engineer, environmental protection engineer, budget estimate engineer, coal transportation and ash removal engineer, power system engineer, thermal control engineer, communication protection engineer, chemical water treatment engineer, general plan senior engineer (1 each).

I) registered Grade 1 building 300,000 2 years 160,000 years.

**) Registered Grade II Building 100,000 2 years 60,000 years.

1) Registered first-level structure 380,000 3 years 160,000 years.

5) Registered secondary structure 220,000 3 years 80,000 years.

3) Registered water supply and drainage 390,000 3 years 170,000 years.

0) Registered HVAC 370,000 3 years 150,000 years.

2) Registered power 360,000 3 years 150,000 years.

6) Registered power generation and transmission 480,000 3 years 200,000 years.

0) Registered power supply and distribution 400,000 3 years 170,000 years.

7) Registered geotechnical 500,000 3 years 200,000 years.

4) Registered cost engineer of the Ministry of Construction 100,000 2 years 60,000 years.

6) Registered Supervision Engineer Ministry of Construction 90,000 2 years 50,000 years.

9) Registered urban planner 190,000 years 3 years 80,000 years.