What are the reasons for the arching and deformation of solid wood floors

1. The moisture content is unbalanced.

The moisture content of the professional and qualified wooden floor of the basketball court should be balanced. However, due to the lack of consideration of the regional conditions of the basketball stadium, the moisture content of the wooden floor of many basketball courts is not suitable for the pavement environment of the basketball stadium. This will cause the wooden floor of the basketball court to arch due to moisture.

2. The paved ground is not treated.

If the paved ground of the basketball court is not leveled and dehumidified, it will cause the abnormal noise of the wooden floor of the basketball court, as well as the arching of the damp and other problems. Before installing the basketball wooden floor panel, the paved raw floor is not thoroughly cleaned, and there are sand particles or other small particles of debris that will arch the basketball court wooden floor panel.

3. There are no moisture-proof measures for installation.

During the installation of the wooden floor of the basketball court, there are no expansion joints reserved or ventilated baseboards. Due to the lack of moisture-proof measures, the air under the floor is not circulated, and the moisture on the ground is not volatilized in time, which is the increase in the moisture content of the wooden keel or the wool floor.

4. The wooden floor of the basketball court is soaked in water.

The wooden floor system of the basketball court is mainly composed of wood, and the wooden floor of the basketball court will absorb water after encountering water, which will increase the moisture content of the wooden floor and cause bulging. If the wooden floor of the basketball court is soaked in water, or the wooden floor of the basketball court is soaked in water, the wooden floor of the basketball court will be arched and deformed, and the wooden floor of the basketball court will rot and be scrapped.

The main reasons for arching are:

1. The wood floor itself is not well treated, the moisture inside is heavier, or the wood used has a large shrinkage performance.

2. The ground is not dry, the water vapor is heavier, the common is cement mortar leveling the ground, the time is not up to lay the floor, in the dry ground, stirring cement mortar.

3. The ground is equipped with geothermal heat, and repeated baking will also cause the floor to deform;

4. If the expansion joints are not reserved, the conventional wooden floor, it is best to reserve the gap of 1 2 business cards between the wooden floors, and the gap of 8 15mm should be reserved to the wall, which is covered by baseboards, and the wooden floor paving should not exceed 5 6 meters, and it is best to leave expansion joints if it exceeds it;

5. The air is humid, especially in winter, and there are often dewdrops on the ground;

After all, the wooden floor is wooden, the deformation of the arch can only be controlled, can not be completely eliminated, just like eating, it is impossible not to leak some food, the biggest problem, wood can not meet water, keep the room dry, moderate temperature, ventilation, construction reserved expansion joints more, can be effectively controlled.

The main causes of arching of solid wood floors include:

1) The expansion joint is not reserved enough, so that the floor arches;

2) Room paving: when installing the floor in more than two rooms, the door sleeve is not equipped with buckles, and when the humidity is larger, the floor of the two rooms stretches horizontally due to a large amount of moisture absorption, resulting in pulling each other at the door of the room, making the floor arch;

3) The house has been uninhabited for a long time, or in continuous rainy weather, and the indoor humidity is greater than 75% for a long time, and dehumidification measures are not taken in time;

4) The expansion joint is nailed by the baseboard or filled with plaster, putty, etc., so that the floor cannot be stretched, resulting in the arching of the floor;

5) The ground is not dried thoroughly before paving, and the moisture-proof isolation measures are not in place, and the invasion of moisture on the floor is not completely blocked;

When laying floors, consumers should choose a professional team for paving, and should pay attention to daily maintenance. Nature Flooring has a professional installation team that can provide standard professional paving services, please consult your local Nature Flooring store for details.

The phenomenon that the local area of the floor arches upwards and is separated from the base floor and is in a suspended state is called floor arching. The arching phenomenon generally does not occur without soaking in water, and the main reasons for the arching of the floor are:

The moisture content of the floor itself is too high; The relative humidity of the indoor environment is too high, such as the humidity of the wall exceeds 20%; The ground moisture content is too high; The expansion joints of the floor are left too small from the wall; The room is too large and is not partitioned. More than one of the above five reasons will make the size of the floor damp and larger, resulting in the floor being unable to stretch after swelling, and the floor can only arch upward.

The laying floor is found to have an arching phenomenon, and the after-sales service personnel should take measures to solve it quickly, otherwise it will become more and more serious and suffer heavy losses

1) After finding that the floor is arched, it should be sawed open with an electric circular saw at the highest point of its arching, so that its tensile stress is released, and it is no longer expanded and arched, and then observe for a week to see if there is still arching phenomenon in other places, if it is no longer arched, the cut floor is replaced with a new floor and then paved.

2) When the floor is arched into the shape of a big mountain bag, the similar baseboard should be removed immediately, so that it can be accelerated for ventilation, the floor that has been removed is inspected, and the floor is seriously damaged and replaced with a new one.

1. The installation is not equipped with ventilation holes.

When the basketball wooden floor is installed, there is no moisture-proof layer or there are no ventilation holes around the floor, resulting in the internal moisture cannot be eliminated in time after the surface layer is laid.

2. The ground is not dehumidified.

Before the installation of the basketball wooden floor, the basketball court pavement ground should be dehumidified, if there is no dehumidification, or the dehumidification is not in place, after the basketball wooden floor is laid, it absorbs moisture and bulges and deforms.

3. The expansion joint is unqualified.

The installation of basketball wood floor should reserve expansion joints to cope with the characteristics of thermal expansion and cold contraction of basketball wood floor. There is no reserved expansion joint for the installation of basketball wood floor, or the spacing of the reserved expansion joints for basketball wood floor is unreasonable, the gap is not opened or the gap is too small, and the surface layer board is bulging and deformed after being expanded by moisture.

4. The moisture content of basketball wood floor is unbalanced.

The moisture content of basketball wood flooring directly affects the professional quality of basketball court wood flooring. The moisture content of the surface layer of the basketball court wooden floor is high or low, when it is high, the wood floor will lose moisture in the dry air, and the section will shrink and warp and deform, and when the wood floor is low, it will absorb the moisture of the air after being paved and produce arching.

Floor arching should be a common occurrence in many homes. Generally, there will be a sense of suspension when stepping on the arching place, so only by finding the cause of the arch can the symptoms be treated! 1. Reason a, the expansion joint is not reserved enough, so that the floor arches; b. The room is laid throughout

When installing the floor in more than two rooms, the door cover is not equipped with buckles, and the floor of the two rooms is stretched horizontally when the moisture and moisture are larger, causing the door of the room to pull each other and make the floor arch; c. The expansion joint is nailed by the baseboard or filled in by plaster and putty, so that the floor cannot be stretched, resulting in the arching of the floor; d. During the installation process, there are foreign objects left under the floor, resulting in arching; e. Arching of the base layer under the floor, such as the original ground before the installation of the floor, the original floor has been arched due to the moisture of the original floor after the floor is installed, resulting in the floor being arched; 2. Maintenance plan Lift the baseboard and reserve the expansion joint again; Install buckles at the connection between the room and the room; Reinstall the baseboard and clean out the reserved expansion joints such as plaster and putty; Lift the floor and reinstall it; Remove the floor, level the floor, dry it and re-pave it.

First, the reason for the arching of the floor.

1. The reason for arching is because the floor is heated and expanded and contracted, and when the floor is installed before, the gap between the floor and the wall is not enough to be reserved, resulting in telescopic arching.

Second, the maintenance plan.

2. Remove the baseboard from the wall Remove the edge from the wall to the position of the arch and then re-pave all the long part to the wall side and leave the gap to install the baseboard The edge of the edge is completed.

3. Excipients are required: a bottle of D3 glue and a bottle of glass glue.

Solid wood flooring is a high-grade flooring material that has the advantages of being very durable, fitting well to the feet, and comfortable to the touch. But sometimes there is a problem of arching of solid wood floors, which can affect the appearance and longevity of the floor.

There are many reasons why hardwood floors arch, but here are some of the more common ones:

1.Humidity issues.

Hardwood flooring is susceptible to ambient humidity, which can cause the floor to arch up if it is too high or too low. If the ambient humidity is too high and the floor absorbs too much moisture, it will swell and produce arching. Too low humidity can cause the floor to lose moisture, shrink and create cracks.

2.Installation issues.

The quality of the installation of solid wood flooring can also affect the service life of the floor. If the floor is uneven or the installation is not standardized, it will cause the floor to arch. For example, the cement base layer under the floor is not sanded, or there is no cushioning material such as rubber mats.

3.Plate quality problems.

The quality of the solid wood flooring is also very important, if the board is twisted or bent to varying degrees, it will cause the floor to arch. This is generally caused by improper production processes and storage in humid environments.

4.Storage issues.

Solid wood flooring should be stored in a dry environment, and moisture protection should also be taken during transportation. If the floor is damp, too hot, or exposed to sunlight, the floor will arch.

In short, there are many reasons why solid wood floors arch up, and we need to strengthen maintenance and upkeep during use to prolong their service life. In addition to the above problems, there may also be problems caused by the direction of floor paving, construction skills, etc. Therefore, in the process of selecting and installing solid wood flooring, it is necessary to find a regular manufacturer and a professional construction team to ensure the quality and use of the floor.

The main reasons for the arching of solid wood floors are as follows:

1.Humidity problem: Solid wood flooring is a natural material, so it is greatly affected by environmental factors such as moisture, heat, and cold.

If the ground is wet, the wooden floor will absorb moisture and expand, and the grinding will cause the floor to deform and arch. In addition, high temperatures and dry climates can also cause wood floors to shrink and deform.

2.Irregular installation: If the installation of solid wood flooring is not standardized, such as not completely smoothing the ground, not leaving enough expansion joints, etc., then there will be problems when the floor expands and contracts, resulting in the arching of the floor.

3.Wood quality issues: If fundamentally, if the selected solid wood flooring material is not of high quality, for example, the wood is eaten by white insects, and the wood has a high moisture content, the floor will start to deform soon after installation, causing the floor to arch.

4.Maintenance problems: If the floor is not washed and wiped properly, the moisture, dirt, etc. are not removed in time, and the sun is exposed to the sun for a long time, it will cause the solid wood floor to become dry and fragile, difficult to bear weight and pressure, and then deformed and arched.

To sum up, when choosing a solid wood floor, we should take into account the humid situation of the underground environment, choose the best solid wood floor, install it in a standardized way and pay attention to daily maintenance, so as to avoid the problem of arching the solid wood floor to the greatest extent.

1. If the indoor humidity is relatively large, especially in the bathroom or kitchen, the water is more frequent, and the weather is humid, the wooden floors installed in these places are prone to arching. Because the moisture cannot be dissipated, it will penetrate deep into the wooden floor, and after a long time, it will cause the wooden floor to deform due to moisture and arch.

2. There is not enough gap when laying the wooden floor, because the wooden floor itself has a certain moisture content, and there should be a telescopic gap when laying, so that the wooden floor can expand and contract freely. But if you don't stay, or if you leave it small. will cause the wooden floor to be unable to extend, and there will be a problem of arching.

3. It is related to the unreasonable laying, if the laying of the face of the acacia bucket is relatively large, there are no segmentation measures, or the wooden floor is laid in the room, and the buckle is not installed under the door, and the arch will also appear.

4. Improper maintenance of the wooden floor in the later stage or failure to clean it up in time, some people even use a dripping mop to mop the floor, which will lead to water seepage inside the floor, which will lead to the expansion of the floor and the problem of arching.