What are the precautions for the acceptance of paint

The construction acceptance of the paint can also be seen from some small details.

1) Whether the surface of the furniture oil mixture is smooth and saturated. Make sure there are no blisters, no cracks, and that the paint thickness is uniform and the color is consistent.

2) Whether the thickness of the surface of the furniture varnish is consistent, the paint surface is saturated, clean, and free of particles.

3) Whether the surface of the wall latex paint is smooth, reflective and uniform, and there is no hollowing, blistering and cracking.

4) The paint of wood and gypsum board ceiling is generally latex paint, which should have a smooth surface and no cracks at the joints of the board.

5) Whether the connection of the ceiling angle line is smooth, and there is no obvious misalignment and deformation.

6) The wallpaper joint is inaccurate and there is no tearing. Patterned textured patchwork should be accurate and error-free.

7) Whether the wall is not polluted and dirty.

Many people are very confused about the acceptance of the painting project, in fact, this is not a technical job, as long as the following 4 points are mastered during the acceptance, you can carry out the acceptance with peace of mind.

Paint and coating construction accounts for the largest area of the entire home decoration, and the owner often puts a lot of effort into it. Good construction can also cover up the flaws of concealed construction. So, how to accept the paint?

First, the standard of paint acceptance.

1. The variety, color and performance of the paint used in the paint project should meet the requirements of residents, and the product quality should meet the current national standards and local standards.

2. The putty used in the paint project should be prepared according to the paint variety and performance requirements, and should be solid and firm in combination with the substrate, and should not peel, chalk and crack.

3. For wooden floors, kitchen cabinets, hanging cabinets and ceilings, putty with water resistance should be used.

4. The viscosity of the paint should be subject to the fact that it does not fall and does not show whiskering when it is painted, and it shall not be arbitrarily diluted during the application process.

5. Apply paint, each time it should be applied evenly, and each layer must be firmly combined.

6. For fine wood decoration products, when the factory is making and assembling, the coating should be applied in the production stage, and the last coating should be applied after installation. 7. Paint application should be carried out according to the temperature requirements of the product manual.

8. After the application tool is used, it should be soaked in the corresponding solvent in time, and it should not be soaked in mixed colors.

2. Precautions for paint acceptance:

1.Ensure that the application of the paint must be applied within the room temperature required by the product.

2.Check whether the surface of the furniture oil mix is smooth and saturated, make sure that there is no blistering, no cracks, and that the paint thickness is balanced and the color is consistent.

3.Check whether the surface of the wall latex paint is smooth, reflective and even, and there is no hollowing, blistering and cracking.

4.Check to see if the walls are free of contamination and stains.

I don't understand any of this, so I reminded the downstairs owner that you must do a good job of cleaning the floor. Spread out an unwanted advertising cloth or something.

That's not specific enough. Paint construction, different items, construction is different. Acceptance, it depends on your requirements, quality standards!

Attention to construction: The surface treatment of the painted items is clean, and there can be no water, dust or rust, etc. If more specialized knowledge is required. Your construction supplies and what kind of effect you want to achieve.