The computer blue screen automatically restarts, and I checked it with 360, saying that my graphics

The landlord can update the graphics card driver, or follow my method to solve it comprehensively, the effect is better.

My usual approach is:

Find the interface computer clinic, which can fix and deal with daily computer problems, and the latest web version of the computer clinic has also been launched.

Enter the blue screen and tap on the blue screen repair.

If my question helps, thank you!

Dear Lenovo users, hello!

It is recommended that you update your graphics card driver to solve the problem you are experiencing, if the driver ** link still does not work, it is recommended that you enter the BIOS to see if your display is normal, if not, it may be your monitor failure, it is recommended that you send your computer to a nearby service station for testing and maintenance, service network query link:

Think Forum:

Lenovo Community.

Use the driver wizard to detect and reinstall the graphics card driver.

Solution 1: You can turn off the power first, open the computer case, dial out the memory stick, use the eraser to wipe the part of the gold finger (that is, where there is a copper sheet) back and forth a few times, and then insert a memory slot back, and you're good to go.

Solution 2: Press F8 without stopping at boot, enter Advanced, select the last correct configuration, and confirm.

Solution 3: It is a bad sector on the hard disk, when the computer reads the bad sector, it is stuck, the background is still running, the CPU occupancy is immediately very high, and then the blue screen, processing method: under normal circumstances, it is repaired with HDD, if it can't be repaired, it can only be replaced with a hard disk.

Solution 4: It's because of illegal shutdown, such as power outage, forced shutdown, or sudden crash, after turning on, it will be self-checked, and it is also a blue screen. It may waste a little time, but it must read it by itself, because this is the process of checking the disk by the hard disk, and generally the first time it has been read, it will not appear next time.

Don't stop with ESC, or you'll have a blue screen next time, do it all over again. If you want to self-test every day, you have to start --- chkntfs t:

0", the general problem is solved.

Before doing the above, it is best to restore the BIOS of the motherboard to the factory value, or you can discharge the motherboard battery, that is, remove the battery, wait for 20 seconds and then install it back, or connect the jumper to two or three, which is conducive to eliminating strange phenomena caused by the disorder of the motherboard BIOS.

The above four methods can't be solved, please reinstall the system.

In advanced security mode, delete the graphics card driver, and then reinstall it.

1. There are a lot of blue screen failures, and I personally summarized it for non-professionals: Generally, it is not a memory module or a system problem!

2. Check the connection between the memory module and the hard disk first, your memory module may be damp, clean the memory module and the memory module installation slot with alcohol. If the memory module and hard disk are fine, then check the computer's cooling system, it doesn't work, you just need to change the installation system!

3. There are generally few problems with the hardware of the computer, and it is generally a problem with the hard disk channel for a long time, and there will be no problems with the new computer.

4. Now the mainstream installation system super U disk boot disk U Guard (uweishicom) production tool, convenient and fast, the system is clean, and the later maintenance is also very complete!

Can't even get into safe mode?

Computers are always blue.

The reason for the BAI screen:

1.Virtually.

Insufficient DU memory causes system multi-tasking errors, and DAO overclocking by mistake, resulting in operation errors.

3.Calculation errors are caused by non-concomitant or corrupted memory modules.

4.The optical drive is opened abnormally when the disk is being read.

5.Attacked by unknown programs or viruses.

6.Version conflicts.

7.There is a bug or corruption in the registry.

8.Software and hardware are incompatible.

9.There is a bug in the application

Computer Blue Screen Solution:

1.Update security software, update drivers, and detect and kill Trojan viruses.

2.The one-size-fits-all approach: reinstall the system.

3.If the above methods do not work, then it may be hardware damage, and it is recommended to send it for after-sales repair.

1. New hardware.

First of all, it is important to check if the new hardware is plugged in, an issue that many people overlook tends to lead back.

The blue screen is generally caused by hardware, and 360 cannot fully detect the hardware at all. You first repair the hard disk,Win's own tools are on it,The cause of the blue screen is generally the hard disk and memory.

Hello buddy, my friend suggests that you turn on the vulnerability repair in 360 Security Guard, click on the settings to turn on the blue screen repair, restart the computer and select 360 blue screen repair, and it should be normal to fix it.

New computer? Is it incompatible between hardware?

Of course, 360 is useless, and if you can't reload, you can only take it to the store.

You remove the graphics card, wipe the metal sheet with an eraser, then clean it up, use the original driver, or go to the official website of the graphics card manufacturer, find out if there is an updated driver, if there is a new one, if not, use the original one.

Write out your graphics card model so we can help you find the driver you want. Also, even if the graphics card driver is uninstalled, it will not affect the boot. Finally, you remove the graphics card yourself to see if the capacitors of the graphics card have protruded or exploded.

Plug and unplug the graphics card first, and then install the original graphics card driver, if it still can't reinstall the system, use a clone version of the system disk.

In the installation of the graphics card driver is to select the custom installation,The next step is to perform a clean installation,Just tick this option。

Uninstall all the graphics card drivers, and then install an official one, if you can't update the motherboard drivers.

It is recommended to reinstall the system and use the driver disc shipped by the computer to install the driver!

It's because your memory module is broken, and it's not expensive to buy a new one, more than a hundred.

You unplug your graphics card first, erase it, and then install the original graphics card driver, if it still doesn't work, it means that there is something wrong with your graphics card.