How about the Little Swan TB80 8168G

Little Swan TB80-8168G Specifications.

Body parameters. Brand:

Little Swan Model:

tb80-8168g(h)

Color: Gray.

Product Type: Wave Wheel.

Degree of automation:

Fully automatic control mode:

Computerized door opening method:

Top open drainage method:

Lower Drain Display:

Inner Barrel Material is not supported:

Stainless steel Cabinet Material:

Galvanized steel plate Suitable for families:

Four-person or more.

Basic parameters. Vortex mode:

Wave wheel type Daily power consumption:

National Energy Efficiency Rating:

Level 2 Inverter:

No Add rinse: Yes Quick wash:

Yes Night Wash: No Appointment:

No Fuzzy Control:

None Adding clothes halfway through:

Yes DD Motor: No Bracket:

Yes Functional parameters.

Child lock function: Yes.

Dehydration function: Yes.

Drying function: None.

Heating function: None.

Air-drying function: Yes.

Cylinder self-cleaning function:

Yes Memory function:

None Automatic power-off:

Yes Autodrain:

Yes Automatic Water Feed:

Yes Specification.

Product weight: 35kg Wash ratio:

Washing capacity: 8 kg.

Washing power: 480 watts.

Dehydration capacity: 8 kg.

Dehydration power: 480 watts.

Washing noise: 62 dB.

Voltage Frequency:

220v/50hz

Dimensions (width, depth, height:

550*565*925mm.

Go to Xinfei** and take a look.

The basic use of the automatic washing machine:

Fuzzy control function: turn on the faucet - put in clothes and laundry detergent - cover the lid - press the power button to turn on - press the start button, the machine will enter the fuzzy control program, automatically set the water level and washing time according to the number of clothes, automatically perform one washing, two rinsing and three spinning, and finally automatically shut down the power.

Before pressing the start button above, you can manually set the individual programs and functions required by pressing the program, function key, etc., and then press the start button to execute. The lid needs to be closed when spinning drying, otherwise the machine protection will not work.

After adjusting the balance of the machine, the foot should be locked, otherwise the barrel will shake too much during work and touch the anti-collision barrel protection switch and stop the machine. The faucet should be turned on throughout the laundry process.

From a national perspective, the current penetration of China's washing machine market has exceeded 76%, of which the urban market has exceeded 96%, and the rural market has also exceeded 53%; With the country's policy of sending household appliances to the countryside and expanding domestic demand, washing machine companies have set their sights on the rural market with greater consumption potential.

In the next few years, the growth space of China's washing machine market demand will mainly come from: the first demand based on urbanization and rural markets, and the renewal demand based on consumption upgrading in the urban market; The overall washing machine market demand will continue to maintain a moderate growth trend in the next few years.

In 2010, the total sales of washing machines in China were about 50 million units, a year-on-year increase of nearly 30%, and the growth rate reached the highest level in history; Among them, domestic sales reached more than 33 million units, a year-on-year increase of about 28%, and exports achieved more than 16 million units, a year-on-year increase of more than 30%, both of which achieved the highest growth rate in history.

From the perspective of different products, in 2010, the total sales of drum washing machines in China reached more than 11 million units, an increase of more than 50% year-on-year, accounting for more than 20% of the washing machine market sales from less than 20% in the previous year to more than 20%. Among them, the monthly sales volume in the fourth quarter exceeded 1.1 million units, accounting for more than 21% of the total sales volume of the washing machine market.

Summary. Pro-<>

We're happy to answer your <>

The reason why the little swan tb80-1528mh shows F8 is because the water level sensor is damaged. Check the water inlet valve, whether the water pipe is normal may be the water inlet valve or water pipe is blocked, or dirty, resulting in a failure, you need to clean and dredge it to solve the E11 failure. Check if the faucet is out of water, and such a failure can also occur when there is no water.

<>Stars] <>

The Little Swan TB80-1528MH shows F8

Dear <> will be happy to answer your <>

The reason why the little swan tb80-1528mh shows F8 is because the water level sensor is damaged. Check whether the water inlet valve is normal, it may be that the water inlet valve or water pipe is blocked, or dirty, resulting in a failure, which needs to be cleaned and dredged to solve the E11 failure. Check whether there is no water in the faucet, and if there is no water, there will also be such a dismantling obstacle.

The brigade suffered a loss<>

<>Stars] <>

Extended information: Little Swan washing machine is a brand of Wuxi Little Swan Co., Ltd., the company was first founded in 1958, has gone through more than 50 years, Little Swan in 1978 produced the first fully automatic washing machine in China. As of 2010, the brand value of Little Swan has reached 100 million yuan, becoming the world's third largest washing machine manufacturer.

<>Stars] <>

Summary. Hello! The reason why the Little Swan TB80-1528MH drum washing machine shows F8 and the solution, the Little Swan TB80-1528MH drum washing machine shows that F8 is a water level sensor fault.

Hello! Little Swan TB80-1528MH drum washing machine shows the reason for F8 and the solution to the bright draft method, Little Swan TB80-1528MH drum laundry filial piety machine key with display F8 is water level sensor failure.

Little Swan TB80-1528MH drum washing machine washing machine display F8 fault imitation jujube method: Little Swan TB80-1528MH roll change big macro washing machine washing machine display F8 fault handling method 1: Unplug the lower end of the transparent pipe of the water level sensor and blow the air, you can hear the action sound of the sensor, indicating that the water pipe is not leaking.

Little Swan TB80-1528MH drum washing machine display F8 troubleshooting method 2: disassemble the upper part of the washing machine case, unplug the water level selection knob, find the sensor and remove it, blow again and measure the contact contact, find the poor contact, and conclude that it is the sensor fault and not the problem of the control board. Little Swan TB80-1528MH drum nuclear book washing machine display F8 troubleshooting method three:

The sensor is closed with an iron round housing and is fixed to the sensor seat by crimping, and the water level control knob controls the water level by controlling the distance of the contacts with toothed forks of different depths, which had to be slowly pried open and removed with a thin cone.

Little Swan TB80-1528MH drum washing machine shows F8 fault handling method Lu Yuan four: The contact fast-acting copper sheet is the same as the ordinary micro switch, but it is larger, and its contact is only a pressure welded copper wire, which is polished with sandpaper and measured to have good contact and restore its original state. If the action is not sensitive when blowing, you can adjust the adjusting screw slightly to make it flexible and open.

Little Swan TB80-1528MH drum washing machine display F8 fault handling method five: Note, when removing the contact part, you should first remove the side shell of Brother Xun (the plate is 2 fixed feet, unplugged), and then remove the water level control iron pressure plate, spring and pressure cap (one pressure plate and one transmission rod), and then rotate the transmission rod core 90 degrees to decompose. Don't throw away those springs and hats.

Hello! The above is the reason and solution for the Little Swan TB80-1528MH drum to display F8.

Summary. Dear dear, it's a pleasure to answer your <>

Little Swan TD100M28T has less wear and tear on clothes, and the clothes are not easy to be entangled after washing. Little Swan 100m28t, time-saving and labor-saving, less water consumption, can achieve more additional functions, such as: drying, deodorization, sterilization, etc., can bring great convenience to our life.

Little Swan 100m28t is a very good and efficient little swan product.

How about a small swan TD100M28T.

Kiss Cong Chong, I am very honored to answer your <>

Happy Bridge Zheng Buried] Little Swan TD100M28T on clothes, less wear, clothes are not easy to be entangled after washing. Little Swan 100m28t, time-saving and labor-saving, less water consumption, can achieve more additional functions, such as: drying, deodorization, sterilization, etc., can bring great convenience to our life.

Little Swan 100m28t is a very good and efficient little swan product.

<> related development: Little Swan 100M28T is a washing machine with high washing efficiency, using stainless steel inner barrel material, which can reduce clothing wear and entanglement. The washing machine also has a variety of additional functions, such as drying, deodorization and sterilization, which can bring convenience to our lives.

The washing ratio of the washing machine meets the requirements of the national energy efficiency level 1, and has a high water-saving and power-saving effect. In addition, this washing machine is less noisy and does not interfere with family life. On the whole, Little Swan 100m28t is a cost-effective, practical, water-saving and power-saving washing machine, which is worth considering buying.

However, you also need to consider your own needs and budget to choose the most suitable product for you.

When was the Little Swan XQG50-811600B manufactured.

Hello, the above questions will be answered by me. The Cygnus XQG50-811600B was manufactured in December 2010. 1. Look at the production date through the bar code, this understanding is wrong, the reason is that according to the product bar code, you can only know what kind of goods are the goods, and you can't see the production date, and the production date is only on the general product certificate.

2. Different specifications, different packaging, different varieties, different **, different colors of goods can only use different commercial codes, and the coding of commodity barcodes follows the principle of uniqueness to ensure that commodity barcodes are not repeated in the world, that is, a commodity item can only have one, or a commodity can only identify one commodity item. 3. The bar code is only convenient for supermarkets to identify goods, there is only one bar code in a product, and this product is produced every day, so it is impossible to find the production date. Hope it helps!