-
Anonymous users2024-02-06Potassium permanganate disinfection method:
1. Concentration: 1 100,000 - 1 5000, that is, 1 to 1 5000 per 100,000; Due to the differences in each region, each factory, and the delivery period, it is impossible to fix the value, and it is necessary to adjust it according to the method of observing visibility and color, as shown below.
2. The disinfection method of fish tank, filter material, grass, sand, stone and other equipment is - soaking and scrubbing for 30 minutes (this method is a common disinfection method in hospitals);
3. The disinfection method for fish is - medicated bath for 10 to 15 minutes, during which it is necessary to ensure that oxygen is sufficient, and it is best to have an air pump to supply air; If the fish is found to have only adverse reactions during the medicated bath, the water should be changed immediately or moved to other containers, and oxygen should be fully supplied; For well water fish farmers, potassium permanganate should not be used to disinfect the fish. This concentration can eliminate most germs. It can also be soaked for 2 hours at a concentration of 15 parts per million or 20 parts per million, and it can basically be completely disinfected.
4. When disinfection, it is recommended to use separate disinfection methods for fish, grass and equipment.
5. Do not mix it with well water or groundwater containing iron.
-
Anonymous users2024-02-05It can be cleaned with ozone water, and the aquarium is generally enough with the HW-XS-5G sterilizer.
-
Anonymous users2024-02-04Newly bought ones can be disinfected and cleaned with potassium permanganate.
-
Anonymous users2024-02-03It is best to soak it in concentrated salt water, even if there is a residue, it is fine.
It is not possible to use potassium permanganate, and it is clear and clean if there is a residue.
-
Anonymous users2024-02-02The fish tank can be disinfected in three ways, such as concentrated salt water, potassium permanganate, and germicidal lamp, and the inner wall of the fish tank can be scrubbed with a small amount of salt, and then soaked in concentrated salt water for 2 or 3 days. Or use potassium permanganate to soak for two hours, if you want the fish tank to be harmless, you can use a special germicidal lamp for sterilization and disinfection.
1. If you want to disinfect the fish tank, you can first use a small amount of salt to scrub the inner wall of the fish tank, and then according to the capacity of the fish tank, mix about 60% of the salt into concentrated salt water, and soak the fish tank beam for 2 or 3 days to play a role in disinfection. However, before use, you need to soak in water for 24 hours.
2. Potassium permanganate Secondly, you can also go to the fish shop to buy permanganate with pure potassium disinfection tablets, add a full tank of water, put in 2 3 potassium permanganate disinfection tablets, and stir well. When the potassium permanganate solution is purple, soak it for 2 hours and then wash it.
3. In addition, in order to reduce the harm of potassium permanganate and concentrated brine to the fish tank, you can buy a specially disinfected aquarium germicidal lamp, generally, the oak stall lasts for 72 hours to use the aquarium germicidal lamp, you can achieve the effect of sterilization of about 90%.
-
Anonymous users2024-02-01If the fish tank needs to be disinfected, it can be treated by soaking in salt water or potassium permanganate water.
You must remember that whether you use salt water or potassium permanganate, the glass glue of the fish tank has a certain corrosive effect, and you must not soak it for too long, just five to ten minutes.
So, what is the right amount of salt, just 5% is good.
It is best if we can prepare a bottle of ordinary vitamin C tablets, which can reduce potassium permanganate within ten minutes, which can quickly alleviate the oxidation effect of potassium permanganate on various facilities in the fish tank.
Generally, 300 catties of water put vitamin C tablets in about 10 tablets.
The first time you disinfect the fish tank, it is best to fill up the water level to test the pressure resistance of the fish tank and prevent it from bursting in the future.
After ten minutes, you can drain all the water in the tank.
If you have used filter materials, fish nets, temperature gauges, heating pipes, etc., and put them in the fish tank to disinfect them, it will be more reassuring.
incubation methods; In order to have a high hatching rate, the water temperature of the hatchery tank should not exceed the temperature of the spawning tank!! >>>More
Hello. To tell you the truth, you can raise. But it is extremely dangerous, and it cannot be taken out again until it is put in the aquarium and died, because whoever is the conductor is difficult to clamp with a wooden clip if you are sick. In a word, it is difficult to raise.
If the distribution box is flooded, the power should be turned off as soon as possible to prevent a short circuit from blowing up. Then use a hot air dryer to dry the various electrical switches, circuits and other components in the box one by one, and after ensuring that all the components are blown dry, energize and close each switch one by one for testing, which can basically be completely handled. Here's how: >>>More
For the daily maintenance of the drying oven, it is recommended to keep the equipment clean, ensure that the power supply is turned off during maintenance, check whether the grounding wire is off, and whether the overtemperature preventer is operating normally. However, when using, in order to ensure safety, when using the equipment that uses the heating wire to heat the object drying, it should be placed in a dry and horizontal place indoors to prevent vibration and corrosion. >>>More
The folding method adopted by the SHG folding container C series is inverted. It uses an industry-standard design that saves space, costs and increases productivity, and the container is easy to clean, organize, and store. >>>More