UC Pro e SoildWorks which is simple to do what to make small parts

Updated on military 2024-02-09
22 answers
  1. Anonymous users2024-02-05

    Recommended SOLIDWORKS is easy to learn and has a wide range of applications.

    Proe entered China earlier, sheet metal design is mostly used, and the application range is also wide.

    ug is more difficult, and mold design is mostly used.

    SOLIDWORKS is a software that is more widely promoted in the college, easy to use, is an entry software to do 3D, but it is more difficult to do complex surfaces, and PRO is a software on two grades, PROE and UG are more popular software in China, PROE tends to be related to product design, UG tends to process, but ordinary work can be competent. In foreign countries, the application trend of the second two models has gradually narrowed, and it has been gradually squeezed out by several software with more powerful functions (analysis).

    In the company, if you can directly express it clearly with CAD, you use CAD, if you use Pro, you need to project engineering drawings, and you can use PRO to link with the machining center.

    If it is general mechanical solidworks, proe is the boss of the electronics industry, ug design precision is high, mainly used in aerospace, catia is also good, you can choose one as your main attack, mechanical design professional three-dimensional touch bypass, I used to only have proe, and then changed jobs, the new company uses solidworks, there is no way, you have to think about it yourself, very soon.

    You can learn both Pro E and SW at the same time, and you will find that SW is easy to learn. The pro e mold is indeed used by more people. But the most powerful parting is ug

    But what kind of work are you going to do now? If it is mechanical design, it is recommended that you learn SW, read the book for half a month, and you don't need any 2D foundation. In the process of learning, you can lay a good foundation for this.

  2. Anonymous users2024-02-04

    If it's a small part in simplified Chinese.

    Let's use SW.

    It's quick to get started.

    It comes with a tutorial on its own, and you can complete some simple parts in a day at most.

  3. Anonymous users2024-02-03

    It is generally considered that SOLIDWORKS is simpler. Make small parts, not complicated, you just use this.

    In addition, the first one is not UC, but UG.

  4. Anonymous users2024-02-02

    SOLIDWORKS is simple, more in line with the habit of plane drawing, UG and Pro E have higher requirements for spatial imagination. SW bought the book himself and came back to read it, and it quickly learned.

  5. Anonymous users2024-02-01

    All three are CAD-cam software SoildWorks is user-friendly and easy to learn. But I feel like it's used less in enterprise applications. The Pro-E is powerful and extensive.

    It's mainstream software. Generally, manufacturing plants use this software to do structure, drawing, analysis, and mold parting. UG is also very functional, and the interface is more user-friendly than Pro-E, which may be easier to use.

    Most of the enterprises used are large enterprises, which are used in the automobile, auto parts, and aircraft industries. In addition, there are inventor (hydraulic), IDES, CATIA (automotive), mastercam (machining). What you choose depends on what industry and position you choose, but I think as a beginner is still learning mainstream software pro-e

    It's much easier to learn about the rest after you've mastered the software. If you want to make a lot of money, you have to work the mold, and it is best to have an internship.

  6. Anonymous users2024-01-31

    It is recommended to use pro e, this software has two-dimensional and three-dimensional, the two-dimensional surface is designed, and you can put it into the three-dimensional to see the three-dimensional effect.

  7. Anonymous users2024-01-30

    Pro E is the most versatile, it's easy to find a job, it's also versatile, and it's much faster than soildworks when it comes to making surfaces.

  8. Anonymous users2024-01-29

    If you just make structures, it is recommended to learn soildworks, which is simple, easy to use, and quick to learn.

  9. Anonymous users2024-01-28

    proe is more powerful. Soileworks is easy to use, but the surfacing feature is not. I've never seen anyone use soildworks to do difficult drawings such as copying.

  10. Anonymous users2024-01-27

    High-end Pro E, UG, Citia

    Soildedge

    However, if you get acquainted with it, you can basically get the job done

  11. Anonymous users2024-01-26

    Pro E, but I heard on the Internet that the SOLIDWORKS 2008 version is very advanced, which is more advanced than Pro E.

    Personally, I feel that these mechanical drawing software will be all over the place, so it is not a problem to learn one as long as you are proficient in the others.

  12. Anonymous users2024-01-25

    It seems that there are many people who use ug and proe.

    SolidWork used to play tricks for a while.

  13. Anonymous users2024-01-24

    SOLIDWORKS is easier to learn, and going to the page is very user-friendly.

  14. Anonymous users2024-01-23

    It is best to use a card to make a picture, and the effect will be much better than an n card. Replace the graphics card with an A-card. Such as sapphire x1650. Other configurations are ok.

  15. Anonymous users2024-01-22

    Graphics have relatively high requirements for computers.

  16. Anonymous users2024-01-21

    You're ready to configure your qualifications.

    However, it's better to buy a 19 CRT for the monitor, so you can turn on a larger resolution.

    It's easy to draw.

  17. Anonymous users2024-01-20

    The above configuration is perfectly fine, but it is recommended to change the graphics card to 7600 or more.

  18. Anonymous users2024-01-19

    OK. And ug is also available. Both of these software are currently very common and powerful mechanical design simulation software, which can start from the design of a small screw, to the simulation and assembly of a whole mechanical equipment, and then simulate the operation of the equipment.

  19. Anonymous users2024-01-18

    Software is just a tool, and the money you make depends on the technology.

  20. Anonymous users2024-01-17

    Inventor is a software, as a mechanical design, it is still good, because SW and PROE entered the Chinese market relatively early, and PROE is taught in schools, so it can be said that Inventor has the functions of SW, and SW has it, Inventor basically has it.

    It is a highly competitive software, but SW entered relatively early, and many people don't know about Inventor.

    From the perspective of development, Inventor will be very promising in the future, and this will refer to the introduction of Autodesk.

    But there are still a lot of SW and PROE in front of me.

  21. Anonymous users2024-01-16

    If you are mold design, product shape design, etc., need complex surface design, then it is recommended that you learn ug, catia, of course, pro-e can also be, but I always feel that pro-e seems to be a little outdated, in fact, there are many software, you can also learn about it.

    Inventor and SW both focus on conventional mechanical design, and the surface function is relatively weak, but for traditional mechanical design, I feel that they are quick to get started and draw quickly, which is more suitable.

    SW everyone knows each other earlier and widely, inventor is the latecomer, some functions are still very advantageous, and the operation interface is also very friendly.

    If it's a pure mechanical design industry, then you can learn Inventor, and I'll use it again, and I feel better than other software of the same type.

  22. Anonymous users2024-01-15

    Inventor is still relatively easy to use, because everyone basically uses AutoCAD for planes, and these two software are from the same company, so it will definitely be popular in the future!

Related questions