XP system 2 0GB memory, how to set up virtual memory

How to set up virtual memory in XP system? Since the memory is the hardware required for the program to run, if the running memory capacity is insufficient, it will prompt that the memory space is insufficient, and the general hardware under the XP system does not allow large memory, at this time, the call can only be alleviated by setting the virtual memory. Some users are not clear about the XP genuine system in ** setting virtual memory, here with the source section to learn the XP system to set up virtual memory.

What size should the virtual memory be set?

If the virtual memory is set too large, it will waste disk space, and it should be set appropriately, for example, the memory is only 1GB, and you need to open large software, then the virtual memory needs to be set to 1-2G; If the memory is greater than 4G, then the virtual memory can not be set, unless the memory is insufficient, then you can set about 2-4G.

The steps to set up the virtual memory of the XP system are as follows:

1. Right-click on my computer on the desktop - Properties;

2. Under System Properties, check the memory size;

3. Switch to "Advanced" and click "Settings" in the lower right corner of "Performance".

4. Under "Advanced", click "Change" in the lower right corner of the virtual memory;

5. If the space of the C drive is large enough, set it in the C drive, if the space of the C drive is insufficient, set it in the D drive, there is generally a recommended value, you can also set the size by yourself, click "Settings", OK.

If your XP system is low on memory, you can refer to the above steps to set up virtual memory.

Virtual memory is also known as virtual memory. Programs running on a computer need to be executed through memory, and if the program is executed that takes up a lot of memory or a lot, it will cause the memory to be depleted. To solve this problem, virtual memory technology is used in Windows, that is, a portion of the hard disk space is used as memory usage.

The next thing I have collected for you is not enough memory how to increase the virtual memory of the XP computer, I hope it can help you.

1.On the desktop, right-click on the "My Computer" icon properties.

2.Click the "Advanced" tab in the System Properties window.

3.Click the "Settings" button next to Performance.

4.Performance Options window, click Advanced

5.Click on the "Change" button in the virtual memory below.

6.The following image shows the virtual memory interface without the settings.

7.If the system disk is insufficient, it is recommended to find a hard disk with a large space, then enter the "initial size" and "maximum value", and then click the "settings" button. (The principle of virtual memory setup is:.)

The minimum value of virtual memory is 1 to 1 times that of physical memory; The maximum value of virtual memory is 2 to times that of physical memory. )

8.Then click the Confirm button step by step, and restart your computer if you need to restart it.

I read "How to increase the virtual memory of the XP computer when the memory is not enough" and want to see:

1.The system memory is not enough to modify the virtual memory size.

2.How XP expands virtual memory.

3.XP how to increase physical memory.

4.How to solve the problem that the computer memory is too small? XP System Memory Optimization Method 5How to modify the location and size of virtual memory storage in the XP system of the computer.

1. Set the virtual memory size according to the physical memory size and personal usage. Open Control Panel - Management Tools - Performance, and in the Performance dialog box that appears, select Performance Logs and Alerts in the left column, select Counter Logs, and calculate the size of virtual memory by using virtual memory records. But this method is very troublesome, generally use an approximate value on it, such as 512MB physical memory, custom virtual memory, you can choose to set a little smaller, for example, the initial value can be set to 512MB, the maximum value is set to 1024MB, if you find that it is not enough in use, you can set it larger, such as 768 1653MB, 768 2048.

2. If you only have one hard disk, which partition you set the virtual memory in, the impact on the performance is not very large, but the partition where the virtual memory is set must have enough space. In a computer, virtual memory is enough to be set in one partition, and it is not necessary to set virtual memory in individual partitions.

3. The method of setting virtual memory is: right-click on my computer - properties - advanced - performance settings - advanced - virtual memory change - click on C disk - select "custom size" - enter the value in the following "initial size" and "maximum value" text boxes - "settings" - OK - restart, and the setting is completed.

If you don't want to set it to C, right-click on the desktop "Computer" - Properties - Advanced System Settings - Advanced - Settings - Advanced - Change - Click C Drive - Radio "No Paging File (N)" - Settings", then the virtual memory in C disk will disappear; Then select the D drive, select "Custom Size" - enter the values in the two text boxes of "Initial Size" and "Maximum" below - "Settings" - OK - Restart, and the setting is completed.

In Control Panel, open System Advanced Performance Settings Advanced Virtual Memory Change. In it, you can select "Custom Size" and "System Management Size" (recommended).

Right-click on "My Computer" --Properties --Advanced --Performance--Settings--Advanced--

Virtual memory change -- custom size, preferably not set on C drive,

My computer right-click property.

Advanced performance settings.

Advanced Virtual Memory changes.

My Computer --> Properties --> Advanced --> Performance --- Settings --> Advanced --> Virtual Memory.

If the computer memory is too small, it will bring a lot of inconvenience to the operation of XP system users. If you want to solve this problem quickly, the best way is to manually set up the virtual memory yourself. So, how does this work?

Next, I will introduce to you the specific method of setting the size and location of virtual memory in the XP system.

Here's how:1. Right-click on "My Computer" --- properties.

2. Click "Advanced" - Settings in the system properties.

3. Click on "Advanced" in the performance options - Change".

4. The page that pops up at this time is the interface to change the virtual memory.

If your virtual memory is currently on the C drive, you want to change the virtual memory to a different drive.

Then you click on the C drive and enter "0" in the initial and maximum values of the custom size.

Then tap on "Settings".

Now the virtual memory value set on the C drive is cleared.

5. I set the virtual memory here to change to D drive.

1.At this point, you click on the D-disk.

2.Click "Custom Size" and enter the initial and maximum values in it, which should be 1-2 times the value of your real memory.

3.Click Settings --- OK --- restart your computer.

Setup Successful! This is the end of the method for setting the size and location of virtual memory in the XP system.