What happens when the page appears half screen, and how to solve the problem that the computer displ

This is the memory function of Windows, after you have adjusted the window, it will remember, and the next time you open it will be the last window size, but this function cannot be modified through the settings.

Method 1: Open a window, adjust to your preferred size, and press enter, and you're good Method 2: Close all IE browser windows, right-click the IE browser icon in the quick launch bar, click "Properties" in the shortcut menu that appears, and the system will pop up the "Start InternetExplorer Browser Properties" dialog page, click the "Shortcuts" tab, click the drop-down bar on the right side of the "Run Mode(R)" of the page that appears, and select " Maximize", and then press OK to exit.

Open the Internet Explorer window, click on the link inside, then close the previously opened Internet Explorer window, leaving only this linked page, pull the border to pull the window to the entire screen, and then close the page. From now on, you can open the Internet Explorer window and you will be able to see the maximized page directly.

Method 3: If the above method does not work, then you need to modify the computer's registry. Method:

Open the "Registry", find [Hkey Current User Software Microsoft InternetExplorer Desktop Oldkareas], then check one of the options "OldWorkAreaRectts" on the right side of the pop-up window, and delete it. Find [Hkey Current User Software Microsoft InternetExplorer Main] in the "Registry" and select "WinDos Placement" on the right side of the window to remove it. Quit the Registry, restart your computer, then open IE, maximize its window, and click the "Restore Down" button to restore the window, then click the "Maximize" button again, and finally close the IE window.

When you open IE again in the future, the window will be normal!

What's going on with the half-screen of the mobile phone, I can't turn it off.

If the phone has a half-screen, it is generally a liquid display problem, or an output problem with the motherboard You have changed the motherboard, so the second one can be crossed out

Let's talk about the main points

Your mobile phone is full-screen handwriting, that is to say, your mobile phone has two layers of screen, one is the touch screen, and the other is the liquid display First of all, see if the handwriting function of your mobile phone is intact, and whether it can touch the screen as usual If there is no problem, the damage to the touch screen can be ruled out Then, take a closer look at the light, whether the liquid display is broken, if it is not broken, it is that the integrated piece of the liquid display is broken Of course, there may be other problems, mainly confirm that the first brigade does the above problems

Then, this time you have to remember when you return to the factory for maintenance, take a piece of paper, and write on it: multiple repairs, require a liquid change After the display is written, it is tied together with the warranty card, and then returned to the factory for the positive chain, and when you come back, it should be no problem

Finally, let's talk about it, your previous two repairs, whether you got the maintenance order, there is a specific fault on it, and the maintenance number If so, please keep it, after you repair it for the third time, and also raise Zhensun is after this repair back, this kind of situation will still occur, you can find the manufacturer to replace it According to the three-guarantee method, repair three times and failure, the customer can ask for a new If the maintenance order is accidentally lost, it doesn't matter, you can also return to the factory, he also has a stub

That's about it

Web page half screen?

This is an issue with IE settings!

Solution: Solution 1.

Open a new IE window, manually drag it to the maximum, and press Shift to close it.

Solution 2.

1. Click the "Start" menu, click "Run", enter "regedit" in the command input box and press the "Enter" key to confirm, and open the registry.

2. In the registry, find the node Hkey Current User Software Microsoft Internet

explorer main, remove the "window placement" key in the window on the right;

3. Find the node Hkey Current User Software Microsoft Internet

explorer\\desktop\\old

work-areas, remove the "oldworkarearects" key from the right window.

4. Close the registry, restart the computer, maximize the IE window twice in a row ("Maximize", "Restore", "Maximize"), and restart the IE browser again to solve the problem.

Solution 3.

Right-click the IE icon in the quick launch bar in the lower left corner, select Properties, and change the operation mode to Maximize.

If you find the first two methods more difficult, it is recommended that you use the third method!! Good luck!

You have two possibilities for this,One is the damage caused by the display itself,The other is the problem of the graphics card driver,Generally, there is a graphics card driver exclamation mark is not installed,You need to delete the old version of the graphics card driver,Re-use the driver wizard software to install the graphics card driver,Then set the resolution,Use the old display to operate first,HDMI signal cable must be plugged into a separate graphics card,

There is an exclamation mark indicating that there is a problem with the driver, first solve the driver and then take a look, and the other monitor will bring up the menu to adjust the position and phase. However, it is generally possible to adjust it to automatic.

Boot the computer and keep clicking the F8 key to enter the system operation menu, select "Safe Mode", if you can enter it successfully, click "Start" "All Programs" "Accessories" "System Tools" "System Restore", the "System Restore dialog box" appears, and select "Restore my computer to an earlier time". In this way, you can use the built-in system restore function of the Windows system to restore to a restore point when the computer was able to boot normally.

Hello dear, if your monitor has the problem of the screen being full screen for a while, one up and half a screen, this may be caused by the incorrect resolution setting of the monitor. Here are some common workarounds:1

Adjust the display resolution: In your Windows operating system, you can go to the Display Settings dialog box to check and change the display resolution. In general, choosing the same option as your monitor's maximum resolution will give you the best display.

2.Restart the display: Sometimes, the monitor may simply have an incorrect resolution due to some issues with its internal hardware.

In this case, try restarting the monitor and check again if the issue has been resolved. 3.Replace the data cable:

Check that the data cable of the monitor is securely connected. If possible, try replacing the cable with a new one to make sure the connection is working properly and there are no loose problems. 4.

Check the slots and plugs: Check the slots and plugs of the monitor for any damage or looseness. If it is determined that there is a problem with the plug or slot, it will need to be repaired or replaced.

If the above workarounds don't work, or if you don't want to adjust the settings and check the hardware yourself, it is recommended to seek professional technical support.

First of all, the phenomenon of semi-middle group screen may be caused by graphics card driver or line problems. It can be solved by reinstalling the graphics card driver, replacing the cable, etc.

If the above methods don't work, you can try the following steps to solve the problem:

1.Check whether the screen resolution is correct, and try to adjust the discrimination rate to see if the half-screen problem is solved.

2.Check whether the screen display settings are correct, such as screen ratio, refresh rate, etc., and try adjusting the corresponding settings.

3.Try restarting your computer to resolve possible software conflicts or cache issues.

4.Check for hardware faults, such as damage or aging of the screen and graphics card.

If the above steps still cannot solve the problem of selling Kai orange half screen, it is recommended to contact professional maintenance personnel for repair.

While using the computer normally, you should pay attention to cleaning the computer regularly and maintaining the integrity of the computer hardware and software to reduce the occurrence of similar problems.

When the computer is in use, the state of half screen appears, indicating that the display of the computer screen is malfunctioning.

Therefore, in order to effectively solve this problem, the best way is to find professional technicians to overhaul and replace the screen.

Do you specifically refer to your desktop wallpaper or your entire desktop only occupies half of the screen, if it is the former, you can right-click to select the properties, the wallpaper selects stretch or fill, if it is the latter, you can adjust the resolution of the screen, select the value corresponding to your computer screen, I hope the landlord adopts.

Graphics card causes、Adjust the resolution or update the graphics card driver、

This happens because: This is because we have turned on zoom in our system settings.

There are generally two reasons for this situation: One is that the phone freezes and restarts the phone. The second is to enable the zoom function in the system settings. You can turn off the magnification effect by tapping the screen twice at the same time with three fingers.