What s going on with such a problem with the computer? Is there any way to fix it?

Updated on technology 2024-02-09
17 answers
  1. Anonymous users2024-02-05

    Generally, a reboot can solve the problem, if it still doesn't work, you have to reinstall the system.

  2. Anonymous users2024-02-04

    It is recommended that you take out the memory module and erase it with an eraser, if it still doesn't work, then it will be difficult to reinstall the system.

  3. Anonymous users2024-02-03

    The drivers of some software are not compatible, you can uninstall or update the recently installed software to the latest driver.

  4. Anonymous users2024-02-02

    Because there is a problem with the hard disk or motherboard, it is recommended to take it for testing.

  5. Anonymous users2024-02-01

    Just reboot it! In the line can only be installed from the system!

  6. Anonymous users2024-01-31

    There are several reasons for this error:

    1. When the computer is being updated, force it to shut down and restart.

    2. When the computer is updating, the power is off.

    Solution: 1. Restart the computer and press F8 to enter"Advanced remediation options", select Last Correct Configuration.

    2. Reboot and press F2 or F11,"One-click restore"After that, press "Deep One-Click Restore" or "One-Click Ghost".

  7. Anonymous users2024-01-30

    Method steps.

    2. Enter the interface of the complete function system, see the options bar on the left, and find Computer Security.

    3. Enter the computer security column and find the manual service, which is used to solve computer problems for computer users, 4. Click to open.

    Open the interface of 360 manual service, you can see that there are many kinds of problems, including network problems, computer failures, game problems, etc.

  8. Anonymous users2024-01-29

    It is estimated that the system is messed with by a virus, so it is recommended to reinstall the system to solve it.

  9. Anonymous users2024-01-28

    How to solve this kind of problem on the computer? I don't know what's wrong, so you can shut it down and restart it or go to the place where the computer was repaired to fix it.

  10. Anonymous users2024-01-27

    This is a problem with the system, and the easiest way to do it is to reinstall the system.

  11. Anonymous users2024-01-26

    This makes the girl's words, you either you recreate the computer system.

  12. Anonymous users2024-01-25

    The hard drive could not be found.

    The boot partition could not be found.

  13. Anonymous users2024-01-24

    It is very likely that the hard drive is broken, and the system boot cannot be found.

  14. Anonymous users2024-01-23

    The landlord can try to turn on the machine and press F8 - select the latest correct configuration, which can generally solve the problem, if it really doesn't work, just reinstall the system, use cabbage to make a U disk system, the method is as follows:

    1. First use Chinese cabbage to make your USB flash drive into a boot disk, and then decompress the system into your USB flash drive, if it is an ISO image, you can also do without decompression.

    2. Secondly, press F2 or del into BIOS to set the U disk boot priority.

    3、Then restart the computer,It will read the U disk first,Enter PE,There is a direct ghost restore system inside,You can also click SETUP to install directly,The system can be decompressed without going into PE to install directly。

    Specifically, you can ask the next Du Niang There is a **explanation that is very simple I hope it can help you. 、

    After installation, it is recommended that you ghost back up the system, and the next time something goes wrong, you can directly restore the system, or the system you used.

  15. Anonymous users2024-01-22

    Browser's tools --- Internet options and click Delete, then dot all the checkpoints OK.

  16. Anonymous users2024-01-21

    If it's not an important program of the system, press OK to turn it off.

    If the corresponding program is not used much, it is disassembled.

    If it is the main program of the system, you can only try it again.

  17. Anonymous users2024-01-20

    Reboot and look down Reboot and see.

Related questions
What's the deal with your own computer shutting down slowly?
13 answers2024-02-09

The main reason for this problem is that you turn off the computer at the same time. There are a lot of programs running, and some of them are still working even if you can't see them, and they have to close them early if they want to shut them down. It's best to optimize it with optimization software. >>>More

What's the deal with the computer being disconnected all the time?
7 answers2024-02-09

There are several possible questions:

1. Caused by network instability, pull out the crystal head and plug it back in, if the crystal head is loose, it is recommended to change the crystal head; >>>More

What's the deal with the blue screen of computer death?
6 answers2024-02-09

It may be that there is a problem with the graphics card, so let's change it. It's best to talk to the merchant before buying this. If it is not compatible, return it. >>>More

What's the deal with the computer not being able to access the Internet, and what is the matter if t
11 answers2024-02-09

This needs to set the IP address of the network card, you ask what the IP gateway of your neighbor is and then remember to set the DNS If the computer does not have the network card after repair, you have to right-click on the online neighbor, properties, and then see if there is a local connection, if there is no local connection, it means that your new motherboard does not have a network card.

What's the deal with the computer blue screen? I just made the system, and I'm going crazy
7 answers2024-02-09

unknown hard error？

If this is the case, it should be a hardware error, literally. >>>More