My computer doesn t have a CD ROM drive, how can I get a new one from scratch?

Oh. How can the computer carry out the system, from the online **ghost version of the system,Then**hard disk installer,Select your **good ghost version of the system in the hard disk installer,Finally, you can execute it。

If you can't run the system, you can use a USB flash drive to make a boot disk for installation.

You can install it with a USB flash drive.,But,You have to understand the things in the BOIS.,The USB flash drive also has to be processed to a certain extent.,It's quite troublesome.,You better ask someone to install it.。

Use a USB flash drive to make a boot disk, and directly set the USB flash drive in the BIOS to boot the system to install the system.

After that**a Rainforest Mufeng one-click backup and restore system (about that), this advantage is that you don't need to install anything, it's a fool to double-click it to choose to restore the system - > browse and find your **gho file - > click on one-click restore.

The computer will automatically restart and enter the recovery.

Hard drives are valuable, data is priceless, do a good backup said.

Newly assembled computers generally do not have a system, at this time users need to install the system by themselves, the new computer can install the system through a disc or a USB disk, but some users assemble a new computer without an optical drive, the new computer without an optical drive can only use a U disk to install the system, there are many friends who do not know how to install the system without a new assembled computer without an optical drive, the following will teach you how to install the system without a disc drive on the new computer.

Installation Notes:

1. The new computer has no system traces, and you need to use another available computer to make a USB flash drive boot disk.

2. Generally, the 32-bit (x86) system with 2G and below running memory, and the 64-bit (x64) system with 4G and above memory.

Floppy disk through U disk system tutorial.

How to install the original win7 system on the solid state drive.

How to install win10 on a new SSD (UEFI installation).

1. PreparationsHow to set boot boot from USB flash drive.

3. The new computer does not have the installation method of the USB flash drive system

2. Insert the U disk on the new computer, and after restarting, keep pressing the shortcut keys such as F12 or F11 or ESC to open the gesture slag menu, and select the U disk option Enter, for example, the computer that does not support these start keys can view the second point to set the U disk startup method;

3. Start from the U disk to enter this menu, press the number 2 or select the option enter through the arrow keys to start the PE system, if you can't enter, select the old PE system;

4. After starting, enter the PE system, the new computer and the new hard disk need to be partitioned before installing the system, double-click to open the [DG Partition Tool], right-click the hard disk, and select [Quick Partition];

5. Set the number of partitions and the size of the partition, generally C disk is recommended to be more than 35G, if it is a solid state drive, check "Align Partition" to 4K alignment, click OK, and execute the hard disk partitioning process;

6. After completing the partition, double-click on the desktop to open [Chinese cabbage one-click installation], select the system ISO image image path of Ghowimiso, at this time, the tool will automatically extract the GHO file, click the drop-down box, and select the GHO file;

7. Then click "Restore Partition", select the system installation location, generally C drive, if it is not displayed C disk, you can choose according to the "volume label" and disk size, click OK;

8. This prompt box pops up, check "Restart after completion" and "Boot repair", click Yes to start the new computer installation system and go through the book and merge process;

9. Go to this interface and perform the operation of installing the system to the C drive, this process takes about 5 minutes;

10. After the operation is completed, the computer will automatically restart, at this time, pull out the USB flash drive, the computer will restart into this interface, continue to install the system and system configuration process, and automatically execute the system activation operation after installation;

11. The process of installing the system takes about 5-10 minutes, and the new computer will be installed on the system after booting into the new system desktop.

The tutorial on how to install the system without an optical drive is introduced to you here, a new computer without an optical drive, you can install it with a USB flash drive, and the steps are very simple.

Reloading Instructions:

1. Since the computer can't be turned on, you have to use another available computer to make a boot USB flash drive;

2. If the memory is 2G or less, reinstall the 32-bit system, if the memory is 4G or above, select the 64-bit system;

3. Before reinstalling, you need to back up the C disk and desktop files, if the system is damaged, enter the PE backup;

4. If you can't even enter the USB flash drive, it means that it is a hardware problem, and you need to find someone to check and repair or replace the hardware.

Hard disk installation: 1) After booting or restarting, press the F11 key or F8 key to see if there is a one-click ghost or similar software installed, and if there is one-click restore, press enter to confirm;

2) After entering the one-click restore operation interface, select "Restore" to confirm. If you have just performed a one-click backup before, you can restore it to the state in which it was backed up.

In addition, if you can enter the current system or press F8 when booting up to enter the command line mode, you can search for Windows or DOS version of the program and GHO system files, and then manually run the ghost program to load the system GHO file can also reinstall the system.

According to your description, it fully shows that your computer system is malfunctioning, and now the system has crashed, and the only way to solve it is to reinstall the system.

If your computer system crashes and you want to reinstall your system, there are two ways to reinstall your system.

Reinstalling the system will only change the system in the C drive of the computer, such as the files and things in the D and E and F disks of the computer.

The first is the optical disc mounting system. It is suitable for those who have a good understanding of the BIOS settings of the computer. [Find and enter the option containing the word "BIOS" in the BIOS interface, 1.]“advanced bios features”

2.After going to "Advanced BIOS Features", find the first boot device option with "first", "First boot device".

3."First Boot Device" option, select "CDROM" Enter, after the configuration is set, press the "F10" key on the keyboard to save and exit, then the computer will restart by itself, and the rest is to install the system automatically.

Above are the steps to set up the BIOS boot. Each computer has different BIOS settings, you can refer to it. Once you've learned it, you'll be able to pack the system on disc. 】】

2.After watching the tutorial on how to make a USB flash drive, you will use the tray system. Go to the computer store and learn how to install the system.

It is suitable for those who have a good understanding of the BIOS settings of the computer. [Find and enter the option containing the word "BIOS" in the BIOS interface, 1.]“advanced bios features”

3.After going to "Advanced BIOS Features", find the first boot device option with "first", "First boot device".

4."First Boot Device" option, select "U disk" to enter, after the configuration is set, press the "F10" key on the keyboard to save and exit, then the computer will restart by itself, and the rest is to install the system automatically.

Above are the steps to set up the BIOS boot. Each computer has different BIOS settings, you can refer to it. Once you have learned it, you will be able to use the USB flash drive system.