WIN7 LAPTOP BOOT PROBLEM

This situation is because of your motherboard problem, you can not believe me, but this is a fact.

The same system and the same CPU, memory, but under different motherboards, there are different boot speeds, and the boot speed quickly enters the desktop, because the motherboard loads a certain desktop and enters, and the desktop is already loaded by waiting for the loading of programs and drivers, so when you see the desktop, the system is still loading drivers and programs.

Huazhi has a high-speed boot motherboard,XP10 seconds or so,Win7 20 seconds or so,Unfortunately, after entering the system, we have to wait for the time and what is the difference between what we usually wait,It may be a little faster to see the desktop place,My Lenovo business notebook e43 1 minute 5 seconds into windows7 85 processes。

Install a 360 software and check that there is a process optimization in the software.,And boot optimization.,Turn on everything you said didn't come out.。 It's also possible that your keyboard keys control the display of the icons you say. Each book is different.

There are many loaded and running programs, and the useless startup programs and services are closed, which can be closed with 360 security guards.

I shut down the computer illegally last time, so I have to self-check every time I turn it on. If this happens every time, it may be a system problem or a bad sector on the hard disk, so if you do this every time you boot up, it is recommended that you return the system.

The driver of the computer hardware needs to be installed.

**This is the BIOS interface of the computer.

Judging from the BIOS information, the intermediate hard disk detection is normal, and the hardware is fine.

You can try to restart the computer directly to see if you have entered the BIOS because of the wrong hotkey.

If the computer still automatically enters the BIOS after restarting, it is obvious that the operating system boot is corrupted.

If you are a novice, you can directly send it to the repair shop to reinstall the system, and you can solve the problem.

Dual hard disks, one solid-state, one mechanical, that generally sets the solid-state as the first boot, the system and some application games, etc. are installed on the solid-state, and the mechanical disk is used as a warehouse disk, storing movies**and** and the like, as well as some infrequent software can also be placed on the mechanical disk.

What should I do if my laptop doesn't turn on?

Hello landlord, windows

7 system is not like the XP system, after all, the XP system is already very perfect, and it is not easy to have so many problems, Windows

7 problems that feel like if you're not using Windows

7Do professional things or use XP, windows7 and then wait for about 3 months to use, of course, if this problem can't be solved, I'll give you a professional solution windows

7 problems, you go and see, basically can be solved, tired to death, I hope to give a good review!!

This is **you go check it out!@

Solved: There is an option to boot into the "PowerManagementSetup" of the BIOS settings.

pwronafterpw-fail", its default setting is "on", set it to "off", and it will not automatically turn on the next time it is powered on again. If you don't have this option, you can turn off the ACPI function in the power management and turn it on again, or turn it on if it's already off. Most motherboards have an option in the BIOS:

In the PowerManagementSetup section, you can select the status of the machine when the power is re-powered after an unexpected power failure, whether it will automatically turn on, stay in the shutdown state, or remain in the state before the power failure. Please set the auto-start to off.

In addition, poor quality of the power supply or motherboard can also cause similar problems. The ATX motherboard needs to detect the level signal of one capacitor to boot up. If it is not guaranteed to be well connected at one time when the power is turned on, an instantaneous inrush current will be generated, which may make the power supply mistaken for a power on signal, resulting in a false start-up.

o⊙)？The motherboard is slightly different depending on the settings.

Change the BIOS settings.

1.Start the computer and press the DEL button to enter the main BIOS settings interface.

2.Select"intergrated

peripherals"Set the item, press the Enter key to enter.

3.Move the cursor to power

onfunction"Options, press the Enter key again to pop up the options menu. In this menu, there are 7 ways to turn on the keyboard, urgent password (password to turn on) hot

Key mouse

move、mouse

click (mouse power) any

key button

only (button to turn on).

4.Select the button

only (press the button to power on) save and exit.

The situation you mentioned is generally caused by system software, memory, and hard disk.

1 Recently, the computer has been poisoned, unstable software has been installed, etc., it is recommended to take a full antivirus, uninstall the software that caused the problem, and reinstall other versions, and it's OKNo more, it's OK to reinstall the system

2 The computer has been holding the dust inside the chassis for a long time, disassembling the chassis, removing the memory module, cleaning it, and then installing it back. i.e. ok

3 If the computer has been used for a long time, the memory is broken, the parallel memory is bought, and the multiple memories are incompatible with each other, etc., it is recommended to replace the memory

4 The computer has been used for a long time, the hard disk is broken, and the logic bad sectors can be repaired by repartitioning and installing the system, but it still doesn't work, then it's time to change the hard disk, and it's OK to change the hard disk

If you are not professional, it is recommended to take it to a computer store to test, and after testing, Li Pitong will talk about a good price and then change it.

If there is a blue screen**0x000000ed it means that the computer hard disk is damaged, you can try to boot the computer and press F8 to enter the safe mode, and then choose the last correct configuration to boot the machine, if it is not good, it is estimated that you have to type and reinstall the slag rental system.

Good luck!

The prompt bootmgr is compressed means that your system disk is compressed, you need to boot the system from the installation disc or boot the system from the USB flash drive, and then decompress the C drive.

2.It's to go into the picture you sent at the end (BIOS) and set the first boot item to a USB flash drive boot 3Select "Try to boot your computer from your local hard drive".

4.At this point, you should be able to enter the system, but we still have to unzip the C drive to finally solve the problem. Turn on my computer. Right-click on the C drive and select Properties.

5.The Properties panel unchecks Compress this drive. Click OK. This decompression process may take a few minutes, and you have to wait patiently. (as shown in the image below).

There is a problem with the system booting.,Use a USB flash drive to install a PE system to fix it.。