What materials are better for sewer pipes when decorating

Guarantee high-end with decorative stainless steel, marble, mid-range bricks and waterproof plates, pay attention to cost-effective can choose the best PVC.

Red bricks are better, and if you build a light brick wall, you can't hang heavy objects like a storage electric water heater.

Of course, lightweight bricks are better, but the size of lightweight bricks is generally a little larger than that of red bricks, so they take up a little more space.

There are many raw materials used to wrap sewer pipes, for example, some owners will choose to use the wall method, and must use mixed mortar, including steel wire mesh, and prepare floor tiles in advance. On the one hand, according to the bricks, the wall should be built into a pole body along the pipeline, and then paved with steel wire mesh, and finally paved with tiles. It's also the easiest way to do it, and it's very soundproof, although it will take up more space indoors.

Some owners will choose to use sound-absorbing cotton directly, if it is a small house, this kind of construction method is actually more suitable, and the price is relatively cheap, but the sound insulation effect is likely to be not particularly good. The other can also be based on the wooden keel ceiling, first carry out the roofing, and then pave the section, and finally the plate is paved on the aluminum plate. It is relatively strong and sturdy, but it is likely to return to moisture after a long time.

The consistent basic principle is to package according to PVC splicing, first use the wooden keel ceiling to carry out the frame design, and then according to the PVC splicing to package the sewer pipe, ** low, and the operation is also very simple, the appearance of the middle and late stages is also good. The wooden keel ceiling is used as a frame, and the PVC gusset is wrapped, which is low, easy to build, beautiful and generous, but the life span is short, especially the PVC splicing aging is more serious. Therefore, it is not common nowadays.

With a wooden keel ceiling built, followed by a solid wood board, and finally pasted aluminum-plastic panel, the advantage of this type of construction method is the best management, compared with PVC splicing firm, the disadvantage is that if the sealing is not tight for a long time, the solid wood board will return to moisture and rot.

The structure is partitioned with a light steel keel, then sealed with cement fiber board, hung with iron mesh, and then painted with wall tiles. The advantage of this type of construction method is that the overall actual effect is good, and the disadvantage is that it is not stable enough, and the edge of the floor tile may crack after a long time. Bricks are used to create columns and pipes, mortar is mixed, steel wire mesh is glued, and finally the floor tiles are glued.

This is also the most widespread practice at this stage, the advantages are not easy to deform, the sound insulation effect is good, there is only one defect, and it occupies a large space. Directly with a sound-absorbing cotton bale. Nowadays, this kind of processing technology is generally implemented in small houses, and the construction of the project is simple and low, and the disadvantage is that it is relatively single, and the actual effect is not as good as brickwork.

New material aluminum alloy profile floor tile support frame. Use a support frame to encapsulate the toilet sewer pipe. Cement foam backfill toilet firmly believes that everyone has never seen and heard, all say that it backfill has no dead ends, and it is not easy to pre-bury water, which greatly reduces the situation of water seepage in the internal structure of the caisson in the middle and late stages, and also has a certain guarantee effect for drainage pipes, in short, it is more advantageous than ceramsite backfill.

Therefore, although the cement foam has no damage to the drainage pipe, the step of fixing the drainage pipe joint must not be omitted, so as to prevent the need for repair in the middle and later stages and reduce unnecessary inconvenience. In addition, in fact, no matter what material is used to carry out the backfill, it is necessary to dispose of the drainage pipes in advance.

I think that if you have a sewer pipe in the bathroom, you can use red bricks to ensure the pipe, you can also use ceramic tiles for storage, and then you can use cement or PVC; After installation, you need to carry out a pressurization test, generally in the case of double water pressure, test whether there is water leakage, you can open the faucet for 20 minutes, make sure that the coal water is closed after dripping, all the faucets are opened after 20 minutes to see if the water meter is moving, including slow walking, I recommend that you can go to the roof during construction, so that it is safer, and once the water leakage, it is also easier to deal with.

You can use PVC material to wrap toilet sewer pipes, which is also a more popular and used material, its waterproof and moisture-proof performance is very good, and it is economical, but there is a disadvantage that it is not very strong.

1. You need to design the location of the bathroom equipment, such as water purifiers, water heaters, toilets, wash basins, etc.

2. Check whether the water pipes and fittings of building materials are damaged or whether they are in good condition.

3. For the installation of toilet sewers, the construction personnel must first consider the thickness of the organs.

4. Try to use less connecting accessories on the ground and wall to reduce the phenomenon of water leakage, and pay attention to the installation of connecting accessories, which must be firm and will not leak.

The sewer pipe in the bathroom is very important. Generally, there are many people who choose to use aluminum gusset or wooden keel to wrap the sewer pipe. It is very important to do a good job of sewer pipes.

I think it's better to use plastic, because it's very waterproof and helps with drainage.

1. Red brick sewer pipe: many owners like to use red bricks for water pipes, red brick sewer pipes are actually a very traditional decoration method, its decoration cost is very low, and the construction is relatively simple, but up to now, it has been slowly eliminated, because it occupies too much space, and the effect is also ugly, without decoration and aesthetics.

2. Aluminum alloy sewer pipe: the use of aluminum alloy sewer pipe is a very much used sewer pipe, because its advantages are many, first of all, its construction operation is relatively simple, the sound insulation effect is good, and the appearance is beautiful.

3. Wooden keel wrapping sewer pipe: If the wooden keel wraps the water pipe, it is also possible to search for it, but it is not recommended. Because of this method of water pipe, the water pipe is mainly wrapped first, and then the gypsum line will be fixed with cement.