What materials are good for roofs when home renovation?

According to the different interior partitions, the bathroom, kitchen, dining room, bedroom, and living room are different. Suspended ceilings, decorative lines. or direct latex paint.

The kitchen and bathroom generally use aluminum gusset ceiling, and the dining room living room modeling roof is made of light steel keel paper gypsum board. The bedroom is decorated according to the height of the floor, and the top surface is directly latex painted, which is simple and generous and economical. Light decoration and heavy decoration are good.

In the future, it will mainly rely on furniture, household appliances or curtains, small decorations or something to build.

In fact, no matter how much you say, it's useless, depending on what you like.

When the economic conditions of many villagers are better, they will want to renovate their old houses or build new ones. When building a house, there are some doubts about what materials can be used to build private houses, so what materials can be used to build the roof of the house? Next, I will briefly introduce to you what materials are used to cover rural roofs.

1. Rural roofs can be covered with metal plates, clay, stone slabs, composite panels, slabs and tiles. Among them, the metal plate is made of galvanized sheet, aluminum alloy plate, stainless steel plate and other materials, and the metal plate is used to make the roof lightweight, low and fast construction; However, its thermal insulation performance is also relatively poor.

2. Slabs and tiles can be divided into different materials such as cement tiles, glazed tiles, color steel tiles, asphalt tiles, cement tiles, resin tiles, etc., which are mostly used in the construction of rural slope roofs, and have good decorative effects. Among them, the color steel tile has the advantages of light weight, high strength, bright color and luster, and fast installation; However, its service life is relatively short.

3. The applicant must first apply to the village committee, and then gradually apply to the higher-level housing or planning department, and then obtain one book and two certificates, namely (homestead certificate and planning permit, construction permit) before building a house. Building a house without an approved plan will be considered an illegal building and may face demolition.

4. When building a house in a rural area, you also need to understand what requirements and restrictions are required for building a house in the local area; For example, villagers are not allowed to build houses on farmland, water sources, or ecological reserves. The area of the house cannot exceed the local homestead area regulations, and multi-storey buildings cannot be built at will, etc. Whether there is a local regulation for the construction of a unified residential building scheme, etc.

The roofing material should be determined according to the site situation, such as the top surface of the heat, should use sunscreen and heat-resistant materials, such as the Great Wall board, aluminum gusset board, etc., if you do not worry about temperature and waterproof problems, it is more appropriate to use gypsum board to do the top surface modeling.

The roof should be made of impermeable waterproof materials, and reasonable structure should be used to achieve the purpose of prevention and drainage. Drainage is to use a certain drainage slope to drain the rainwater from the roof as soon as possible; Waterproofing is the use of waterproof materials to form a closed waterproof covering.

The type of roof.

1. Flat roof: the maximum slope of the roof is not more than 10%, and the common slope of civil buildings is 1% 3%. Generally, cast-in-place and prefabricated reinforced concrete beams and slabs are used as load-bearing structures, and waterproofing and thermal insulation are done on the roof.

2. Sloping roof: the slope of the roof is large, more than 10%. There are various forms such as single slope, double slope, four slope and rest mountain. Single-slope is used for houses with small spans, and double-slope and quadruple-slope are used for houses with larger spans. Roof trusses are commonly used as load-bearing structures, and tiles are used for roofing.

3. Curved roof: The roof shape is a variety of curved surfaces, such as spherical surface, hyperbolic paraboloid, etc. The load-bearing structures include grids, reinforced concrete monolithic thin shells, suspension structures, etc.

1. Membrane roofing: membrane roofing has good waterproofness, and most roofs in Europe and the United States use this material, such as TPO, PVC, etc.;

2. Roof tile tiles: The commonly used materials for roof tiles are glass fiber, asphalt, etc., which are currently used in many families;

3 clay and cement tiles;

4. Metal roofing panels.

It's good to do a flat slope in Beijing-Bo-Xing.

What material is good for a sun roof? This option is both cost-effective and practical.

1, glazed tile: glazed tile and the building for load-bearing, aesthetic considerations, has a strict proportional relationship, hundreds of years, glazed craftsmen will glaze the French summary of the formula, the kiss beast is placed at the intersection of the ridge and the top of the temple two slopes, is the fulcrum of the roof beams and columns, to make glazed tiles, first of all, the size of the kissing beast should be determined. According to the mantra in the glass line, the height of the kissing beast is determined by the girder, which is two-fifths of the height of the beam.

2. Tang celadon tile: Tang celadon tile is a traditional representative tile type used in Chinese Tang Dynasty architecture, which is a tile laid by a combination of plate tile and cylinder tile. Tang tile single tile size is large, thick sense of strong, Chinese traditional temples, pavilions, antique buildings and other buildings indispensable high-end roof tiles.

3. Asbestos tile: Asbestos tile is the abbreviation of cement asbestos tile; Cement has strong compressive capacity and weak tensile capacity, while asbestos has weak compressive capacity and strong tensile capacity, and asbestos is inserted to improve the tensile capacity of composite materials. It was more common in simple houses (shacks) in the seventies and eighties.

5 common materials for bedroom ceiling decoration.

1. Calcium silicate:

The board has good water resistance, but the construction is inconvenient and difficult to cut, and the dust is easy to cure, except for a few boards such as Etney on the market, which do not contain asbestos, the rest of the small factories contain asbestos, and the cost is about three times that of gypsum board, it is recommended to use gypsum board for decoration. Calcium silicate board is more expensive than it is commonly used in current decoration.

2. Aluminum honeycomb perforated sound-absorbing panel ceiling.

Its structural structure is a perforated panel and a perforated back panel, which is directly bonded with an aluminum honeycomb core with high-quality adhesive to form an aluminum honeycomb sandwich structure, and a layer of sound-absorbing cloth is pasted between the honeycomb core and the panel and the back panel.

3. Splint ceiling.

It is commonly used for current decoration. Plywood (also called plywood) is made by cooking and softening logs, cutting them into large sheets along the annual rings, and by drying, finishing, gluing, assembling blanks, hot pressing, and sawing. It has light material, high strength, good elasticity and toughness, and resistance to shock and vibration.

Easy processing and finishing, insulation and other advantages.

4. Gypsum board ceiling.

It is mostly used in commercial space, and the general use of 600x600mm specifications, there are bright bones and dark bones, and the keel is commonly used aluminum or iron.

5. Light steel keel gypsum board ceiling.

Gypsum board is made of plaster as the main raw material mixed with additives and fibers, which has the properties of light weight, heat insulation, sound absorption, non-flammability and sawability. Gypsum board and light steel keel (pressed by galvanized thin steel) combined, it constitutes light steel keel gypsum board, at present, the use of light steel keel gypsum board ceiling as partition wall more, used to shape the ceiling is relatively less.

Because the bedroom ceiling does not need to consider the waterproof function, the selection of materials is relatively simple. However, the requirements for sound insulation effect are relatively high, and gypsum board and calcium silicate are generally used as the main materials.

Gypsum board: the advantage is that it is more environmentally friendly, convenient construction, not easy to crack, and it is determined that it is waterproof in general, ** in 120-160 yuan square meters.

Calcium silicate board: the advantages are that the water resistance and sound insulation effect is good, moisture-proof and anti-corrosion, the texture is light and the strength is high, it is determined that the construction is inconvenient, the cutting is difficult, and the first is relatively high, in 360-480 yuan square meters.

The two materials of the bedroom ceiling have their own characteristics, relatively speaking, gypsum board is more affordable, and the cost performance is relatively high. However, calcium silicate ceilings are more prominent in terms of sound insulation.

Therefore, what material to choose for the bedroom ceiling depends on the personal situation, I hope the above content will be helpful to you.

The top of the gypsum board hanging looks good, as long as there is no water on the top, it will not get wet.

According to the material, the ceiling commonly used in the society can be divided into, calcium silicate board ceiling, aluminum gusset ceiling, aluminum plastic panel ceiling and gypsum board ceiling.

Calcium silicate board is made of gypsum powder, glue, white cement, glass fiber composite, basically used for tooling, home decoration is rarely used, and the fire performance is relatively good.

Aluminum gusset ceilings are mostly used in kitchens and bathrooms for home decoration, which are corrosion-resistant and easy to clean.

Aluminum-plastic panel ceilings have now been eliminated.

Gypsum board ceilings can be divided into light steel keel skeleton ceilings and wooden keel ceilings, which are generally used in the living room, dining aisle and bedroom in home decoration, and are also used in KTV, hotel room ceilings.

Yun's buriedSuspended ceilings for family homesIt is the most important part of modern decorationSuspended ceilings for family homesIt has a great effect on improving the decorative effect. There are many types of materials used in the ceiling of the living room, so people are often hesitant when choosing and don't know how to choose. So,Suspended ceilings of family housesWhat is the material?

Let's take a look.

1. PVC plastic reinforcement material: light weight, waterproof, moisture-proof, mite-proof, multi-color pattern, smooth. When choosing these materials, be aware of surface cracks, scratches, and protrusions, and touch the surface of the pad for clear reinforcement.

In routine maintenance, PVC plastic reinforcements can be cleaned with water after cleaning with detergent due to their ability to resist water and washing. When cleaning, be sure to avoid water.

2. Aluminum reinforced material: This is a new type of roofing material. It has the characteristics of flame retardant, moisture-proof, anti-corrosion, durable, and is not easy to age and deform.

It can be divided into acoustic panels and decorative panels, both of which are high-quality roofing materials. Common aluminum reinforcements are laminated and painted, as well as laminates, where the lacquer has a short shelf life and is easy to color. Rolled plates have a half-life and have no color.

Thin-film coated sheets are divided into ordinary films and imported films, and their service life is shorter than that of ordinary roll-coated sheets.

3. Gypsum board material: This material is widely used at present, and it has good decorative effect and good sound absorption performance. Cast decorative panels and sound-absorbing panels decorated with paper are usually used.

Gypsum board can be made into several geometric patterns, and can also be carved into various flowers, birds, fish, insect patterns, with the characteristics of convenient construction. However, it is relatively poor in terms of fire and moisture resistance.

To be in theSuspended ceilings for family homesTo set the ceiling, you must first consider the height of the living room. If the height of the living room is not high enough, the design of the ceiling will make the room shorter, frustrating and uncomfortable.

Editor's summary:Suspended ceilings of family houses

You can get it for free

Usually, the biggest difference between commercial housing and self-built houses is that commercial houses do not need to decorate the roof, while self-built houses need to decorate the roof. Therefore, the roof decoration is very important, if the decoration is not suitable, it will lead to problems such as water leakage. So what are the roof decoration materials?

What are the tips for roof decoration? Let's learn together.

1. Clay and cement tiles as roof decoration materials: some villas or places that are more prone to disasters are generally used as the roof surface. However, although the ceramic material here is relatively expensive, its use is very long.

Moreover, terracotta tiles can also be used in different colors and patterns, and the clay and concrete are just some common materials.

2. The roof surface is slab tile as the roof decoration material: the roof decoration material and the roof tile are also the roof tile. Roof shingles include asphalt, wood, etc., during construction, if the asphalt is sealed, then when laying it will be lower than the slope of the roof 2 12.

3. Roof membrane roof: For example, the roof decoration in Europe generally uses the membrane system, which is very conducive to waterproofing, and secondly, asphalt waterproofing membrane will be used, which has the same function and effect.

1. When decorating the roof, the first thing to consider is the thermal insulation performance of the roof, so the roof must be laid with insulation materials. Secondly, this moisture-proof work should also be done well, so as to ensure that the house can achieve the effect of warm in winter and cool in summer.

2. The roof can also be decorated with a skylight, which not only increases the air circulation, but also extends the use of space, which will make the whole house more usable and further enhance the size of the living space.

To sum up, it is about several common roof decoration materials introduced, as you are struggling how to decorate the roof, I hope that the orange sedan chair these information can be helpful.

You can get it for free

The keel is the first major ceiling auxiliary material, which is divided into light steel keel and wooden keel; The light steel keel has high stability and excellent fire performance, which is suitable for uncomplicated ceilings, such as modern style, simple style, etc.; After the traditional ceiling has been suspended for a long time, after the water in the wood evaporates, the gap between the ceiling and the wall will be large. This is also the common reason why when the decoration is almost completed, the painter comes to fill the paint again.

<> theoretically, you can hang anything from the ceiling if you like it. However, for practicality, aesthetics, construction convenience, safety, and other considerations, there are only six kinds of ceiling materials that often appear in home decoration - I will talk about the difference between the six materials separately. The suspended ceiling here refers to the suspended ceiling in the living room and dining room.

Suspended ceilings are related to the choice of ceiling materials. So now a friend asks such a question: what kind of board is better for the living room ceiling?

Personally, I think that we should not only look at the board, but also look at what material is used for the ceiling?

Ceiling is one of the most commonly used materials in decoration, it not only plays a beautifying role, but also has the role of heat preservation, heat insulation, sound insulation, sound absorption, and can also hide and protect various pipelines and equipment. First of all, gypsum board gypsum board purchase should also pay attention to brand and environmental protection. Inferior gypsum board has poor strength, is easy to deform, and contains harmful components such as asbestos.

What material to use depends on the decoration budget, such as simple, you can make a simple and generous effect, delicate, you can make a magnificent and high-end effect, the key is to see how to choose, the following will introduce several commonly used decoration ceiling materials! There are two construction methods for this kind of wooden beam ceiling, the first is the imitation wooden beam construction method, gypsum board to make shape, and then carry out wood grain veneer, the cost is lower and the construction is simple, but the overall decoration effect may not be so good, after all, it is imitation.

PVC plastic panels may be more common in daily life, it is mainly used in the kitchen or bathroom, but it can also be used as a living room ceiling material. It is a bit waterproof, moisture-proof, etc. However, when purchasing, you need to pay attention to whether there are scratches, cracks, some chips, etc. on the surface.