Is the dashcam s loop recording set to time, or is it off?

Generally, the loop recording time is 3 minutes, 5 minutes, 10 minutes, it is best to set 5 minutes, which is convenient for later search, and in addition, in case of special circumstances, the lockable clip will not be covered by the loop recording, and the best evidence can be completely retained, so be sure to set the time clip. Hope, thank you.

The dash cam sets the time for each segment, such as a minute segment. Or three minutes, five minutes, whatever you want, for example, now that your memory card is full, the latest recording will automatically overwrite your first one, and so on.

The dash cam recommends not turning it off even after parking. It will automatically loop the recording. Typical recordings are kept for 3-7 days, depending on the size of your memory card.

The following is the basic information about the dash cam:

1. The storage time depends on the size of the memory card and the storage file format, the larger the capacity, the longer the recording time.

2. Dash cams are all cyclic recording, for example, C600 can record almost 2 hours with an 8G card**, and after the storage is full, it will automatically delete the first stored**Continue recording, and so on.

3. If you don't export the image, it will be automatically overwritten when the card is full, and you can generally determine the file you want to record according to the memory size of your card.

4. The requirement of the dash cam for the SD card is that the high-speed memory card of CLASS10 must be used, CLASS10 represents only the reading speed, and the recorder needs the write speed of the card. However, the recording speed of the recorder is not so fast, and the writing speed of general class10 products can already meet the needs, if you are not at ease, you can use the atto disk benchmark tool to test the writing speed.

3 or 5 minutes is most appropriate.

Dash cam loop recording setting options generally have 1 minute, 2 minutes, 3 minutes, 5 minutes, 10 minutes and other different time options, when setting the cycle time, do not set too short, not too long, because if the recording time is too short, the more segments are split, it will increase the probability of losing frames, and the time is too long, the number of stored ** will be very small, and it will soon be overwritten, it is recommended to set it to 3 or 5 minutes is the most appropriate.

Dashcam loop recording means that you can loop recording inside a memory card that is large enough (currently at least 8G).

Looping means that when the memory is full or the song is finished, the previously saved videos will be deleted. As long as the memory card is relatively large, it will be stored for a long time.

The recorder loop recording function mainly includes:

At this time, the loop recording function will automatically delete the part of the video file that is the longest away from the current time to make some space, so that the recording can continue. In addition, some of the dash cams can also set their own cycle time.

I am happy to answer for you, dear, there is a loop recording function, the dash cam setting option does not have a loop recording function for the following reasons: 1. First of all, if you want to use the loop recording function of the dash cam, you need to turn on this function to achieve loop recording, so if the dash cam can not loop video, the owner can check whether the loop recording function is turned off. 2. Generally speaking, whether the quality of the memory card in the dash cam is qualified, it will also affect the function of the dash cam loop recording, if the transfer speed of the memory card is low or the memory card is not **, it is easy to make the dash cam unable to loop the video, so the owner must choose a regular place to buy when buying a memory card.

3. If the dash cam turns on the video lock function, at this time, when the locked ** is too long and there is no way to delete it, it will cause the car's dash cam to be unable to loop the video, at this time, as long as the video lock function of the dash cam is turned off.

3 or 5 minutes is most appropriate.

Dash cam.

Loop recording setting options generally have 1 minute, 2 minutes, 3 minutes, 5 minutes, 10 minutes and other different time options, when setting the cycle time, do not set too short, and do not too long, because if the recording time is too short, the more segments are split, which will increase the probability of losing frames, and if the time is too long, the number of stored ** will be very small, and it will be overwritten soon, it is recommended to set it to 3 or 5 minutes is the most appropriate.

3 or 5 minutes is most appropriate.

Dash cam loop recording setting options generally have 1 minute, 2 minutes, 3 minutes, 5 minutes, 10 minutes and other different time options, when setting the cycle time, do not set too short, not too long, because if the recording time is too short, the more segments are split, it will increase the probability of losing frames, and the time is too long, the number of stored ** will be very small, and it will soon be overwritten, it is recommended to set it to 3 or 5 minutes is the most appropriate.

It refers to how long the video you shoot is stored in your card, usually 1 minute, 3 minutes, 5 minutes, 10 minutes, etc., so that when the card is full, it will overwrite the previous video clip from the front.