Under wifi, why can t Apple 6 receive MMS

Turn off the wifi and receive MMS messages with cellular data acceptance.

1. Select "Settings" to enter the settings interface;

2. After entering the settings interface, select "General";

3. Select "Network" in the general menu;

4. Enable "Cellular Data" in the network menu;

5. Find the MMS item and fill in all the MMS data. Note here, ** inside". "Don't write a full stop. The capacity here refers to the capacity of the largest MMS packet;

1. MMS is opened with mobile phone cellular data to receive not wifi reception.

2. There is also the MMS setting in the cellular data, and if you don't have it, you can't receive it.

3, If the iPhone does not crack CMWAP, the APN of the cellular is CMNET

The APN for MMS is CMWAP

MMSC is.

MMS**. The maximum message size for MMS is 5000.

Because MMS is a service provided by the operator, the tariff should be borne by the operator.

The data connection is not opened, so the destroyer can't receive it**, and you can receive it by turning on the cellular data.

<> also take a look at Mobile MMS Settings, on your phone, Settings - General - Network.

Data Cellular APN CMNET

MMS APN CMWAP

MMSC Dashan Ri : 80

The maximum MMS volume is 102400

The rest of the whole family burns empty, and restarts the phone after setting.

It is recommended to try again after setting it again, and the recommended steps are as follows:

1) Find the Internet switch position: enter the "Settings" - "General" - "Network" menu.

2) Turn on the "Cellular Data" switch: (Operation method: click the switch icon and slide to the ON state), otherwise you will not be able to access the Internet or send and receive MMS messages after the setting is successful.

3) How to set up Internet and MMS: Go to "Cellular Data Network" and enter the parameters of Internet and MMS.

Parameter content. Internet Parameters (Above): APN: CMNET Username: Null Password: Null MMS Parameters (Below): APN: CMWAP Client Name: Null Password: Null MMS**::80

Maximum MMS message size: 102400

mmsc ua prof url: null.

Hello, the solution to this problem that you said is as follows:

One. For new Apple phones, you need to manually set up the MMS data connection to accept MMS.

The steps are as follows;

On the home screen, tap to go to "Settings".

Click on the "Cellular Data Network" option.

Enter CMNet in the APN option with the username and password left blank.

Set mmsc to; MMS** is; The maximum MMS size can be filled in at will, and it is recommended to be greater than 1000.

Go back to the main interface of Settings and find and select the "Info" option.

Turn on the [Send and receive MMS] option switch.

Two. For mobile phones that have already sent and received MMS messages.

In the settings, toggle the airplane mode.

Press the power button to power on and off again.

Supplement; Stopping or turning off the GPRS function will result in the inability to receive text messages.

Hope it helps!

The first step is to tap [Settings] in your iPhone.

Step 2: Find [Info] under Settings and click on it

Note: Cellular should be turned on.

This is because the iPhone needs to be set up to use MMS, and the setup steps are as follows:

1.Find [Settings] on the main interface and enter.

2.Find [Cellular] in [Settings] and click to enter.

3.Turn on the switch after entering the [Cellular Network].

4.Go back to the [Settings] drop-down and go to [Info];

5.In [Messages], find [Send and receive MMS] and turn on the switch.

6. ps.After completing all the above steps, restart the network, and if the network does not solve the MMS problem, restart the phone.

Maybe you forgot to turn on your mobile data, and the acceptance of MMS messages requires data.

The MMS option is not turned on.

Steps:

Step 1: Open Settings.

Step 2: Find the Info option.

Step 3: Click on the message and click the MMS button (turn green to turn on).

Here's how:

1. Tap "Settings" in iPhone6 to find "Cellular" under Settings, turn on "Cellular" it, and then go down.

2. Turn on the "Cellular Network" and then go back to the "Settings" of the phone, find a "Message" button here, click to enter, and click "Send and receive MMS" in the "Message Settings" interface to open it.

3.Finally, restart the network, if you don't know how to restart the network, you can restart the phone.

Start by determining if the settings are correct:

Settings > General > Network > Cellular Data Network.

Format: APN: CMNET (CMWAP can also be written here, but the Internet speed is very slow in this way, this is the network prepared by mobile for low-bandwidth mobile phones, if it is a monthly user, it is recommended to choose CMNET mode).

Username: Password:

The above three lines are used to set up Internet access.

The following lines are set up for MMS messaging.

APN: CMWAP (here it can only be CMWAP) Username: Password:

MMS**: The maximum message size of MMS: 50,000

Then turn it off and restart it (you can also turn it on without turning it off, just turn on the airplane mode, and then turn off the airplane mode).

Turn on MMS in text messages.

It's a mobile card that needs to be set.

Open Settings - General - Network - Cellular Data Settings - The top is the Internet Access Point and the bottom is MMS.

MMS access point writes CMWAP MMSC writes.

MMSC (forgot what it called) writes.

The maximum write size for MMS messages is 50,000