Audi Q5 power steering faulty light elimination steps

<> Steering System: Fault! Please park.

If the light is on and the driving guide appears, the steering assistance may be out of order.

Please park in a safe place as soon as possible. Do not continue driving. Please seek professional help.

<> Steering System: Fault! You can continue driving.

If the indicator lights up and driving instructions appear, then the steering system may react heavier or more sensitive than usual. In addition, when driving in a straight line, the steering wheel may be off-center.

Please reduce your speed and drive to a professional business to eliminate distractions.

Dynamic steering: Corrects the steering wheel position.

If the indicator lights up and the driving guide appears, the dynamic steering system is re-initialized. At this point, after starting the engine, the steering wheel will move slightly. If the steering wheel has previously been moved with the engine turned off, the initialization must be re-initialized.

After initialization is complete, the display is off.

It is important to note that:

If the indicator light (see image below) is only on briefly, you will be able to continue driving.

<> in the event of a system failure, the stabilization function of the dynamic steering system does not work.

The specific operation steps for the elimination of the Audi Q5 power steering faulty lamp are as follows:

1. Open the door on the cab side of the Audi Q5.

2. Pull the hood switch on the left side of the driver's leg of the Audi Q5.

3. Lift the hood of the Audi Q5 engine upwards.

4. Use a support rod to support the hood of the Audi Q5 engine, and ensure that the support is firm to avoid danger during operation.

Fifth, the supplementary provisions of the steering power oil to the max position.

6. Press the button located on the left side of the multi-function steering wheel to eliminate it.

It can be matched by connecting the trip computer. 1. After the Audi Q5 replaces the electric steering machine and steering angle sensor, the dashboard will show that the rotation system needs to be rematched.

2. After connecting the vehicle's driving computer through the laptop, it can be operated through the software.

3. After connecting, select the Power Steering menu.

4. After entering, select the safe access function menu.

5. After clicking on the security access in the picture above, the security anti-counterfeiting identification code will pop up and enter 40168.

6. After that, you need to enter the channel number, and enter 060 for the channel number.

7. After that, modify the value of the angle sensor to the normal value, and you can choose it here.

8. In this way, the electric steering machine and the steering angle sensor are successfully matched.

Hello, I have seen your question and am sorting out the answer, please wait a while

This can only be eliminated by a computer.

FAW Audi Q5 bulb fault indicator.

If the indicator light is on, then the bulb is damaged. The driver's guide indicates the location of the light bulb. Warning There is pressure in the bulb, and it may be replaced when it is replaced, and there is a risk of personal injury!

Gas discharge bulbs * high-grade xenon headlights) must be handled correctly for high-voltage components - life-threatening!

All the lights in my Q5 are on, but the faulty lights can't be eliminated.

Summary. Hello friends, Audi Q5 steering failure common problem, this has the following several? The first is the problem of the vehicle's electronic power steering system program, which leads to this phenomenon and needs to be re-matched with the electronic power steering system program.

The third is the failure of the related electronic power steering motor, which is the need to replace the electronic power steering motor assembly.

Hello friends, Audi Q5 steering failure common problem, this has the following several? The first is the problem of the vehicle's electronic power steering system program, which leads to this coarse Li phenomenon, and Chongyan He Chixin needs to do the matching of the electronic power steering system program. The third is the failure of the related electronic power steering motor, which is the need to replace the electronic power steering motor assembly.

The 12 Audi Q5 feels a little shaky when playing in place.

Check this, shock absorber top rubber, the top rubber of this car is also easy to damage, top rubber and plane bearings are generally replaced on it.

After changing the cross-shaft high-pressure oil pipe and booster pump, I still have the feeling of shaking my hands.

What the car repairman said has something to do with the top glue.

The car is unknown.

It's a little shaky when you play in place.

What is the reason for this, exactly.

Problems with the top glue and flat bearings can also cause jitter.

Moreover, the plane bearing of this car is prone to problems, and it can be solved by replacing it.

Summary. Step 1: First, click the one-button start button in the central control position of the Audi Q5 to start the vehicle engine, otherwise the tire pressure cannot be cleared.

Step 1: First, click the one-button start button in the central control position of the Audi Q5 to start the vehicle engine, otherwise the tire pressure cannot be cleared.

Step 2: After starting the Audi Q5 engine, click the icon button on the steering wheel to roll left and prepare the ear on the side of the steering wheel to enter the tire pressure setting interface, and select the corresponding button on the central instrument panel.

Step 3: After selecting the corresponding content button, press and hold the custom button on the right side of the steering wheel. Stop when you hear a ticking sound.

Step 4: Observe the vehicle dashboard and you can see that the tire pressure fault light has been cleared.

Have a great day!