How to clean the freshly laid tiles at home when they are dirty, what kind of cleaner is used for ti

I bought that kind of cleaner casually outside, and I was afraid of hurting the tiles. I'm afraid of losing big because of a small thing. What kind of cleaner is good for tile cleaning?

Shenzhen Langjiefu cleaning **** can help you. The company recommends several kinds of care solutions for cleaning ceramic tiles, which are known as the legends of cleaning and care. There are surface cleaners, there are deep cleaners.

There is a rust remover, a cleaner to remove stubborn stains. 1.Tile surface oil stains, tea stains, coffee stains, ink pollution.

"Porcelain Pick" can be used. "Porcelain Jiebao" has good friction and hydrolysis resistance; It has a good decontamination effect on particle dirt, protein dirt, oily dirt, tea stains, coffee stains and dust, which can significantly brighten the surface of the article and not scratch the surface of the article. 2.

Stubborn stains such as tea stains, ink stains, oil paint pen stains, drink stains, paper and wood water stains on the surface of the tile or have penetrated into the deep layer. Use the deep cleanser "CleanClean".

"Prickis" deep cleaning products are suitable for removing stubborn stains such as tea stains, ink stains, oil paint pen stains, beverage stains, paper and wood water stains on the surface of various ceramic polished tiles (vitrified tiles) or those that have penetrated into the deep layer. The product has the characteristics of rapid and thorough decontamination, no damage to the tile surface, no pollution to the environment, no injury, green environmental protection, etc., and is deeply liked by the majority of users.

If the stain is too stubborn, it can be used with "Dirt Clean". "Dirt and clean" neutral products, can quickly and thoroughly remove all kinds of polishing, marble, granite, terrazzo, antique bricks, exterior wall tiles, plastic floors and other basic materials on the surface of all kinds of oil, wax stains, coffee stains, juice stains, markers and other stubborn stains. What kind of cleaner is good for tile cleaning, of course, choose the legend of cleaning care, tile cleaner ** have to buy, of course, the first choice is Shenzhen Lang Shenzhen Lang Lang Clean ****.

**Appropriate. Works best. Detergents** are available.

The Chinese New Year is coming soon, and many families have begun to carry out cleaning, which must include scrubbing the tiles, but what about the accumulation of a lot of plaster in the gaps of the tiles? Today I will teach you a little trick for cleaning tiles, the cleaned tiles are as clean as the new ones, I hope it can help you!

Kitchens and bathrooms at home are basically tiled because they are not only beautiful but also easy to clean. Moreover, the kitchen and bathroom are very dirty places, and it is easy to clean with tiles. However, the tiles will be yellowed after a long time, and like the kitchen tiles, there will be a lot of oil stains on them, which is very difficult to clean.

How to clean the tiles correctly? Today, I will share with you a few tips for cleaning up.

The material used to wipe the wall tiles is very important, and many people think of dish soap at the first time, but sometimes the effect of dish soap is not good. We can make our own dish soap, first prepare a container and pour some liquor first. Baijiu can not only remove oil stains, but also have the effect of sterilization, and the effect is very good.

Then pour in some white vinegar, dish soap and flour in turn, and stir the liquid well after pouring.

The stains on the tiles are generally stubborn, and if you use a rag, it may not be clean, so it is recommended to use steel wool balls to clean them. Wipe the wall directly with a steel wool ball dipped in the adjusted solution, whether it is oil or stains, it can be effectively cleaned.

After brushing with a steel wool ball, remember to wipe it again with a damp towel, and the tiles will be very clean.

The tiles at home are cleaned with water! Then the ceramic tiles cleaned with a green umbrella are clean and bright. It's good to clean up.

We generally use filial piety laundry detergent. I think the laundry detergent works very well to remove stains.

This should be a special autobiographical body that is also clear and better.

The tiles in the home are very easy to clean, put some baking soda in the water, squeeze a little toothpaste, drop a few drops of dish soap to open the water and wipe the tiles clean and bright!

<>1. Daily cleaning of floor tiles can be cleaned with detergent, soap, etc.

2. Use soap and a little ammonia and turpentine to clean the floor tiles to make the floor tiles more shiny and surplus.

3. The polished tile should be waxed regularly, and the time interval should be 2-3 months.

4. If there are scratches on the brick surface, you can apply toothpaste to the scratches, and wipe them with a dry cloth to repair them. Celery sleepy.

5. The gaps between bricks and bricks can be removed from time to time with detergent, and then a layer of waterproof agent can be brushed on the gaps to prevent the growth of mold.

6. Sodium hydroxide or potassium bicarbonate solution is used for pollutants such as tea, coffee, beer, ice cream, and oil.

7. Ink, cement and other pollutants use hydrochloric acid, nitric acid and other dilute solutions.

8. Use special cleaners for paints, coatings and other pollutants.

Floor tiles are a common floor decoration material, they are mainly pressed by the clay process, therefore, in the later practice, in order to give full play to the product performance and extend the service life of the floor tiles, you might as well learn some floor tile cleaning tips. Floor tiles are a common floor decoration material, they are mainly pressed by the clay process, therefore, in the later practice, in order to give full play to the product performance and extend the service life of the floor tiles, you might as well learn some floor tile cleaning tips.

Routine maintenance

There is no large area of stains, just for daily cleaning, you can choose dish soap, soapy water, or soapy water with a little ammonia and turpentine mixture, soak the mop, wash the tile, can make the tile clean and translucent, to achieve a neat and refreshing effect.

Removal of all kinds of stains

1) Removal of lacquer and glue.

After the renovation is completed, the paint and chemical glue attached to the surface of the floor tiles can be removed with banana water, which is slightly soluble in water, soluble in various organic solvents, flammable, and mainly used as a solvent and thinner for painting.

2) Oily stain removal.

For daily contaminants such as tea, coffee, beer, ice cream, grease and other contaminants, alkaline detergents or organic solvents can be used, and sometimes sodium hydroxide or potassium bicarbonate solutions can be used to remove contaminants.

3) Severe water damage.

Take an appropriate amount of acidic solution and water and mix it in a certain proportion, dip it with a brush, and then brush it again, brush it back and forth several times, and then rinse it with water. The acidic solutions on the market now include oxalic acid, hydrochloric acid, phosphoric acid and other solutions, and gloves should be worn before cleaning the scale, because the acidic solution will be more or less corrosive.

Repair and maintenance of scratches

1) If there are a few slight scratches on the brick surface, you can apply toothpaste to the scratches and wipe them vigorously with a soft dry cloth to repair them. If the damage is serious, it should be replaced in time or repaired by professionals to avoid personal injury.

2) Polished tiles should be waxed regularly, and it is advisable to wax them once every 2-3 months. The gaps between the bricks can be cleaned with stain remover from time to time, and then brush a layer of waterproofing agent on the gaps with a brush to prevent mold growth.

3) To prevent mildew every day, the surface of the tile needs daily maintenance, and the joints also need to be carefully maintained to prevent the whole brick surface from being damaged due to the reproduction of mold.

Well, I'll cover some of the above tips for cleaning floor tiles. After reading the above content, I believe that everyone knows more about several methods of cleaning. The above tips are recommended to everyone after trying and are still very effective.

I hope that for everyone to clean the floor tiles, they can be more or less helpful.

We all know that the decoration of the use of materials is more, is one of them, and is also a necessary one, when people in the purchase of ceramic tiles must pay attention to its quality, at the same time, now the market is the best ceramic tile brand models are a lot, people must pay attention to the purchase, in addition to do a good job of tile cleaning, the following is for you to introduce the ceramic tile with what cleaning? How to clean tiles?

What to clean tiles with?

1. Borrow a toothbrush and brush to remove stains.

Toothbrushes and brushes are common, but they are also useful tools for cleaning dirt from crevices in tiles. The specific operation of this method is to use a toothbrush dipped in a small amount of stain remover to remove the dirt in the gaps in the tiles, and then use a brush to dip the waterproof agent and apply a strip on the gaps, "This method can not only prevent water seepage, but also prevent mold growth."

2. Waxing and cleaning.

Floor waxing can effectively maintain the floor, and waxing tiles also has the effect of keeping the tiles bright and clean. Thoroughly clean the stains on the tiles, and if there is glue or stains, you can use a neutral detergent or scouring pad to wipe them off. Sprinkle the floor cleaner on the tiles first, then pour the water-based wax onto a clean dry mop and evenly coat the tiles.

After waxing, let the surface of the tile air dry naturally, and wait until it is dry before stepping on it.

How to clean tiles?

1. When the surface of the tile is polluted by cement, a thin layer of concrete cleaning agent can be used, which is suitable for cleaning the gray matter, lime residue and cement thin layer on the interior and exterior wall tiles (glazed tiles, full-body bricks, vitrified tiles, polished tiles), fair-faced tiles, clay products and natural stones.

2. With multi-functional stain remover, ceramic tiles are often stained by greasy, rust, soap stains, etc., especially at the joints of ceramic tiles. In order to keep the porcelain surface clean and not damage the glossy porcelain surface, you can use a multi-purpose stain remover to clean it. In the gaps of the tiles, you should first use a toothbrush dipped in a little detergent to remove the dirt, and then use a brush brush to brush a waterproof agent in the gaps, which can not only prevent water seepage but also prevent mold growth.

3. The surface antifouling of vitrified bricks is the key, and the only defect of vitrified bricks is that after grinding, the pores are exposed, and oil stains and dust are easy to penetrate. According to industry insiders, this is a problem recognized by the industry, but some manufacturers have solved this problem through new technologies after research. Many brands of products can be sold as qualified products without anti-fouling treatment, and consumers do not understand the situation and do not care when paving is used, and staining will occur.

Consumers should ask clearly when purchasing, and the vitrified tiles that have not been treated with antifouling treatment should be waxed in use, and general floor wax can be. In order to avoid damage to the brick surface during construction before paving, the brick surface should be covered with woven bags and other items that are not easy to decolorize.

After reading the text content of a chapter, people must have understood what to clean tiles? How to clean tiles? For the cleaning of ceramic tiles, we must adopt the correct method, only in this way can we achieve better cleaning, and when people use ceramic tiles, we must do a good job in its maintenance, because only in this way can it be glossy as new, prolong the service life.