How to assemble the newly bought computer is how to wiring it and put it completely on the table

After the assembly machine is assembled and running normally, the technician will partition and format the hard disk of the computer, and then install the system, hardware driver and common software, when it is handed over to the customer, the computer may be used normally, and the customer should carry out the following checks and tests after receiving the computer to ensure that the computer is suitable for the customer's use

1. Check the appearance of the computer to see if it meets your own requirements;

2. Install test software (such as: Master Lu) to test the hardware, check whether the CPU, memory, motherboard, hard disk, etc. meet your own requirements, and test the performance of the whole machine;

3. Check whether the connected device used by the computer is normal; Such as: speakers, cameras, printers, handwriting tablets, etc.

4. Install the software you need and delete the software you don't use;

5. Finally, test the stability of the computer by baking the computer (it is recommended to run the software without interruption for about a week) to test the stability of the computer.

Once everything is in order, the computer is ready to use.

1: Don't rush to plug in the power supply, first determine the position of the monitor, the main unit, and the subwoofer.

3: The subwoofer wiring is inserted into the green interface hole (normal red, green and blue) at the back of the chassis 4: Finally, connect each power supply.

The monitor is connected to the data cable of the host,Plug in the wrong way is not plugged in,The wire connected to the host is plugged into the green hole (back panel),There are generally icons,Take a closer look at yourself。

Where are you? After-sales service is so poor? Call the computer seller to come home and you're done. Plug it in yourself, in case you buy a board with poor quality, it will be broken in two clicks, and it can't be guaranteed.

Learn to assemble a necessary course for computers, and explain in detail all the wiring in the host.

Hello, these questions need to be described at length, and the easiest way is to suggest that you find someone to help you out.

Motherboard, CPU, memory, power supply, graphics card, hard drive, chassis, display.

Now the installation system basically does not use the optical drive, most of them use a USB flash drive, 1The first thing to do is to partition the system.

According to your question, I guess you have never installed a computer, if this is indeed the case, it is recommended that you send it to a professional computer store and ask them to help you install it, which is not only time-saving and labor-saving, but also safe and reliable. For people who have a little basic knowledge of the computer, this is much simpler, as long as you buy an installation disk (CD, U disk, you can do it), plug it into the computer, start it and install it according to the prompts.

1. Spend money to solve the problem.

2. Ask someone to do it (find a friend to install the system).

3. Solve it yourself (you need to buy a system disk and an optical drive, or directly make a boot U disk) These things can generally be found on the Internet, and the system disk can also be installed using a recorder.

Being able to ask like this proves that it is Xiaobai, or it is installed in a computer store outside, and it is easy to spend some money.

The seller should put it on for you. You can now take it to the store and ask the merchant to put it up for you.

It is best to get a regular place to load, and be sure

Didn't the seller install the system?The installation system should be mounted on a system tray or U disk.

If you don't know how to do it, just find someone to pretend!50 yuan only, saving trouble and worry.

This is to find a professional person to come to your home decoration, which is generally not expensive.

The computer city can be installed for 50 yuan.

Go to Jingdong**Buy the system U disk and install it yourself, it is generally easy to install.

Find a nearby computer installation service shop, install it, and if you have any problems in the future, you can help you in time, and leave professional things to professional people to do, if you are not familiar with it, you should not get it, and it is not very expensive dozens of yuan, I hope to help you.

Click the Start menu, select My Computer, My Documents, Online Neighbors, etc., respectively, and then right-click and select Send to--desktop shortcut, and you're OK

ICO then tap to show or hide the generic icons on the desktop.

Right-click on the desktop, select Properties, and then select "Desktop" in the window that appears--Custom Desktop", and under the "Desktop Icon", put a checkmark in front of "My Documents", "My Computer" and "Online Neighbors".

Win7 desktop icon.

Right-click on the desktop and select Personalize to change the desktop icon, and see the options on the desktop in it, check and press OK.

If it's a home version.

Click Start

XP system. Right-click on the desktop and select the properties of Desktop Customize the desktop, check the options in it and press OK.

That's great, but I don't know where to get this article.

Yes, the chassis is just good-looking, and some ideals are not wanted, but the two pins connected to the start button should be connected with something that can be overpowered.

It's okay to just move in.

If you know how to do it, it's okay, isn't it normal to bring a computer in college.

It's okay not to buy a case, and it's good to dissipate heat, but it's dusty, so you have to dust it often. That's what the cow people do!

This is not okay and can be easily damaged. It is easy to get into the dust, too. It is recommended to get a case. It doesn't cost a lot of money. Dozens of pieces.

If this appears, it means that it is assembled, the computer is fine, and it is normal!

You want to install the system, now your hard drive should still be empty, and the computer can't find the system to boot!

You can use a disc or a USB flash drive to install the system, there are many tutorials on the Internet, and it is basically a fool's operation, and you can follow it step by step.

Reboot and then do what you want.