How do you assemble a computer? How do I assemble a computer?

It is recommended that you do not buy your own accessories and assemble them yourself, because assembling a computer is not that simple. You don't know what accessories you need to practice, which shows that your computer knowledge is very lacking.

Suggestion 1: Buy a branded computer, and now the branded computer seems to have door-to-door service. If something goes wrong with your computer, you don't have to worry about it.

Suggestion 2: If you want to buy an assembly machine, then go to the computer to find a big store to install, they will help you install the machine, the assembly machine is more cost-effective than the brand machine, but if there is a problem, it is very troublesome for the rookie, in fact, many problems are very simple but you just don't understand, I used to be like this.

In addition, it is necessary to enrich computer knowledge, and using a computer is not only about being able to play games on the Internet.

Will you have 100 points? Only to find someone in the market, depending on your level, it is definitely not good, it is recommended to buy a computer for the first time, or buy a brand, after all, you will have more problems in the future, then the assembly of people will not come to you to repair, at most let you take the machine to the store, or buy the brand is good, a ** door-to-door service.

Plug in the correct motherboard holes, in fact, it is relatively simple, because the holes are wrong and can't be plugged in, pay attention to static electricity, nothing else.

Motherboard,Cup,Memory,Graphics card,Hard disk,Optical drive,Chassis,It's OK to connect it after buying.,Of course,The specific options need experience.。。

Go to the computer city, you tell the boss what you think, the price, the configuration, and let him write you a price, but quote a price, let it copy it yourself, change a few stores, ask the price, find a few more, and finally find the **medium, don't look for the bottom, that is dangerous, and then cut the ultra-lowest price. If it's not cheap, let it be delivered.

As for wanting to match the machine:

Check it out.

If you don't understand computers, it's better to have a good brand, Lenovo is good,。。

Otherwise, something will go wrong with the assembly and you will die urgently

It's better for rookies to buy brands, and if you really want to have a problem, you will be dumbfounded.

The desktop computer assembly tutorial is as follows: Tools: CPU, motherboard, memory module, heat sink, SSD or HDD, graphics card, power switch, case, monitor, keyboard and mouse.

1. First, put the motherboard on the motherboard box. When the motherboard leaves the factory, the CPU base has a plastic protective cover and a metal clip snapped. 2. Now there is a protective cover design on the motherboard, pay attention to the words on the cover, "Please install the processor first, and then remove this cover and keep it properly".

3. Open the metal clip of the CPU base. Open the metal clip completely. And check the needle angle of the base, do not rule out that the motherboard has a needle bent out of the factory, and don't "abuse" the needle with your hands, otherwise it will hang the motherboard CPU and other hardware.

4. When installing the CPU, pay attention to the alignment of the CPU notch and the base protrusion. In addition, pay attention to the green arrow in the example below, the CPU is not indented, after putting it in for a new one, put the clip under the cover and snap the buckle. After the clip is snapped, the plastic protective cover will automatically pop down, and then pull down the lever.

6. The CPU is installed. Speaking of which, it is normal for the metal clip to have a "creaking" sound when it is rotated. 7. The radiator base has the words 1150, and the buckle is buckled into the direction of 1150.

Install the heatsink base on the motherboard.

Bilibili can pay attention to the anchors of the lower installation, and there is a lot of installation knowledge.

Required tools: screwdriver, tweezers, wire pliers, radiator.

The steps are as follows1First, open the computer case and install the motherboard on the motherboard bracket.

2.To install the memory module, insert the memory module into the corresponding slot on the motherboard, and note that the thumb that needs to be inserted after the memory module is plugged in.

3.To install the CPU, first insert the CPU into the CPU socket of the motherboard, and then install the accessories of the CPU fan to the CPU socket on the motherboard.

4.Connect the power supply, connect the power cord to the plug between the motherboard and the power supply, pay attention to the connection order and the position corresponding to the plug.

5.Install the graphics card and hard drive, plug the graphics card into the appropriate socket on the motherboard, and then install the hard drive on the hard drive shelf in the main chassis box.

6.Install the case fan and ensure that the ventilation in the case is good.

7.Connect the necessary cables, including motherboard power supplies, hard disk power supplies, graphics card power supplies, and case fan power supplies.

8.Finally, close the main box again, plug in the power cable, and you can start the slide group to use the computer.

Summary: Assembling a computer requires a certain amount of skill and patience, and requires the correct installation of hardware, connection of wires, and testing to ensure the compatibility and stability of the hardware and the system.

The basic steps to assemble a PC are as follows:

1.Choose the right computer accessories, including CPU, or lead motherboard, memory, hard drive, graphics card, power supply, chassis, etc.

2.Follow the diagram on the motherboard's manual to find the appropriate slot, insert the CPU into the CPU slot on the motherboard, and install the heatsink.

3.Insert the memory into the memory plug on the motherboard, and install the hard disk and optical drive in the appropriate location according to the motherboard's requirements.

4.Plug in the graphics card and secure it to the appropriate slot on the chassis.

5.Connect all wires and data cables on the power supply and chassis and follow the wiring instructions on the power supply manual.

6.Finally, close the lid of the case, plug in peripherals such as a monitor, mouse, and keyboard, and turn it on.

It should be noted that when assembling the computer, it is necessary to follow the operating specifications such as safe electricity use and anti-static to ensure the stability and safety of the computer. At the same time, it is best to choose the appropriate hardware configuration according to your own needs to get better good core performance and user experience.

You shouldn't ask that, woman, right?

The eyes are high and the hands are low, and assembling a computer is not as simple as eating dumplings and dipping them in vinegar.

It's just going to be written for you, you can't read it, in fact, you don't want to read it. Carryable.

It's like decades ago, a stupid buddy typed a lot of words, but was sent away by the other party.