How to deal with the water ingress of the all in one mobile phone, and how to deal with the water in

If you are using a Huawei phone.

It is recommended that you proceed as follows:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not use a hair dryer to blow or bake at high temperature (including microwave heating) after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone is made of precision electronic components.

There is a potential risk after water ingress, so please keep your phone turned off.

4. If you don't have a backup of your data.

There may be a risk of data loss when repairing.

Next, let's take a look at how to deal with the water after the mobile phone is in water.

1. First of all, when you accidentally find that your mobile phone is in water, you should pick it up immediately, the longer the mobile phone is soaked in water, the greater the damage, so you should not hesitate to pick it up if you find that your mobile phone is in water.

2. After picking up your mobile phone, you must not perform any key operations on the mobile phone, especially if it is a touchscreen smartphone. You should carefully remove the back cover of the mobile phone battery, peel off the mobile phone battery, and power off the mobile phone.

3. After the power is off, you can carefully wipe it with a dry cloth, and then you can move on to the next step after wiping off the external water droplets. Please note that you should never use a hair dryer to dry your phone, otherwise, the high temperature and scorching heat may cause devastating damage to the sensitive components inside the phone.

4. Next, put the external dried mobile phone into a sealed container, wrap some plastic bags on the outside, and use rice to fill all the containers, so that the mobile phone is submerged in the container, and it is better to leave it for 1 2 months. In general, if possible, put in desiccant for better results.

5. After one month, take out your mobile phone, install the battery, and try to turn it on. If it can be turned on successfully, then the phone can be used normally, if it can't be turned on, then it is very sad and can only consider buying a new phone.

How to deal with water ingress into the all-in-one mobile phone? If the phone is connected to the water. Immediately remove the phone. Shake off moisture. Turn it off and don't turn it on again. Get a professional to deal with it.

If the mobile phone gets into the water, don't turn it on again, and send it to a professional repair shop for processing.

Mobile phone liquid inlet treatment method:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing.

Try to place the mobile phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of the mobile phone, if the mobile phone is turned on, press the power button to turn it off, if the mobile phone has been turned off, do not try to turn it on, take out the SIM card and microSD card, and bring the mobile phone to the customer service center as soon as possible to test and deal with it, so as not to cause unnecessary losses.