How to check the real capacity of the battery after the battery of the Apple mobile phone was replac

Here's how to check the actual battery capacity of your iPhone:

1. Open Settings. This version is ios10, the rest of the versions may be slightly different. Then find [Privacy] and click to enter.

2. After entering the [Privacy] page, we swipe up and see [Diagnosis and Dosage]. Click to enter.

3. After entering the [Diagnosis and Usage] page, you need to set it to "Automatic Sending". The default is "Auto Send".

4. If the previous setting is "Automatic Sending", then we click "Diagnosis and Usage".

5. With so many pieces of data, which one should we look at? Don't worry, just swipe up and find [log-aggregated-latest date] in the data list. For example, and then open it.

6. At this time, we saw that there were a lot of data, and we couldn't understand it at all. Don't worry, the data is not useful to us. We keep swiping up.

7. Go all the way to the position where the scroll bar is about "circled", slide slowly, and find [

At this time, we know the actual capacity of the battery, 2100 is the actual capacity of your mobile phone battery, and the data of each mobile phone will be different, here is just an example.

Extend. iOS is developed by Apple.

Development of a mobile operating system. Apple first announced the system at MacWorld on January 9, 2007, and was originally designed for the iPhone and later applied to the iPod touch

and other products. iOS vs. Apple's Mac OS X

The operating system is the same as that of a Unix-like commercial operating system. Originally, this system was called iPhone OS

Because iPad, iPhone, and iPod touch all use iPhone OS, it was announced at the 2010 WWDC conference that it would be renamed iOS (iOS is a registered trademark of the network equipment operating system of Cisco in the United States.

Apple's name change has been authorized by Cisco).

In January 2016, with the release of the version, Apple fixed a vulnerability that had been there for 3 years. This vulnerability allows an iPhone or iPad user to access a network with a captive portal, such as in a hotel or airport, where the login page displays the network terms of use over an unencrypted HTTP connection. Once the user accepts the terms, they can surf the Internet normally, but embedding the browser will share the unencrypted cookie with Safari.

Using this shared resource, hackers can create autonomous fake captive portals and link them to the WiFi network to steal any unencrypted cookies saved on the device.

After using the Apple phone for a period of time, sometimes it feels that it is not durable, and there is no evidence if it is suspected that it is a problem with the phone's battery. So how to detect the true capacity of the Apple mobile phone battery to be more accurate?

The most common way to do this is to look at battery health. The health of the new mobile phone battery is 100%, and with the increase of use time and charging times, the mobile phone battery will have some attenuation, which means that the health will decline.

How do you calculate the true capacity of a battery based on its health? In fact, it is very simple, multiply the initial design capacity of the battery by the health of the battery. For example, the design capacity of the Apple 7 mobile phone battery is 1960mAh, and the current health level shows that there is still 85%, so the remaining capacity of the mobile phone battery is 1960*85%=1666mAh.

This method is not only suitable for Apple's original batteries, but also for mobile phone batteries of third-party brands that can display the health level normally, but the disadvantage is that it cannot detect high-capacity batteries of third-party brands.

So how can we accurately detect the true capacity of high-capacity batteries of third-party brands? Professional maintenance technicians will have special testing equipment, but for the general public, that is not suitable.

We can use third-party software to detect, and the recommended one here is the PC version of AISI Assistant. When the Apple phone is turned on, connect it to the computer with a data cable, open the computer version of AISI Assistant, and you can check the real capacity of the high-capacity battery of the third-party brand. Whether the capacity is false or not, whether it is a brand new battery with 0 cycles, will not escape your eyes.

Summary. 1.Open the phone, check the label on the battery, if you are afraid that the label is not accurate, you can also remove it and put it on a special battery testing equipment for testing.

1.Open the mobile phone, check the label on the battery, if you are afraid that the label is not accurate, you can also remove it and put it on the battery testing equipment of the special chain rubber door next to the shed for detection. 2.

Apple mobile phone to replace the new battery can go to the **battery doctor this app, you can find the real capacity of the battery inside, it is recommended that the mobile phone battery should be replaced with the original. 3.Generally**an Aisi assistant, in the computer**a, the data cable is connected to the computer, and how much is displayed in the Aistool Shensi assistant.

You've done a great job! Can you elaborate on that?

1.Open the mobile phone, check the label on the battery, if you are afraid that the label is not accurate, you can also remove it and put it on the battery testing equipment of the special chain rubber door next to the shed for detection. 2.

Apple mobile phone to replace the new battery can go to the **battery doctor this app, you can find the real capacity of the battery inside, it is recommended that the mobile phone battery should be replaced with the original. 3.Generally**an Aisi assistant, in the computer**a, the data cable is connected to the computer, and how much is displayed in the Aistool Shensi assistant.

Summary. Hello, dear, it's a pleasure to serve you How to check the battery percentage after the battery of the iPhone has been replaced: to check it in the "settings" of the phone.

1. Open "Settings" and find "Battery". 2. After entering, find "Battery Health". 3. In "Battery Health", see "Maximum Capacity", and the following percentage value represents the health of the battery.

Because it's not an original battery. In fact, when a non-original battery is used, the system will be able to detect it, and then this prompt will be displayed, indicating that you need to go to Apple to replace the battery. If the phone does not have the problems of not being able to charge and consuming power too quickly, then there is no need to change the battery of the phone, and you can continue to use it.

However, if the maximum capacity and peak performance of the battery cannot be detected, it means that the battery may be underclocked.

How to check the battery percentage after the battery has been replaced.

Dear, hello, it's a pleasure to serve you How to check the battery percentage after the battery has been replaced: to check it in the "settings" of the phone. 1. Open "Settings" and find "Battery".

2. After entering, find "Battery Health". 3. In "Battery Health", see "Maximum Capacity", and the following percentage value represents the health of the battery. Because it is not the original Chop Chunzi battery.

In fact, when a non-original battery is used, the system will be able to detect it, and then this prompt will be displayed, indicating that you need to go to Apple to replace the battery. If the phone does not have the problems of not being able to charge and consuming power too quickly, then there is no need to change the battery of the phone, and you can continue to use it. However, if the maximum capacity and peak performance of the battery cannot be detected, it means that the battery will have the possibility of frequency reduction.

If you just change the unofficial battery, it doesn't show that the battery is healthy, if it's an official battery, you can see it by opening the battery in the settings.

What does battery health display one mean.

Kiss because you are not replacing the official battery, so it can't be displayed.

So how do you see the percentages.

If you want to display the percentage in the upper right corner of the mobile phone screen: 1. SettingsClick the "Tooth Xun Wheel" icon on the mobile phone desktop to enter the "Settings". 2. After the battery enters the "Settings" option, find "Battery" in the pop-up interface.

3. Set the "percentage", click on Bi to enter the "battery" option, and find the "Mu Huifu battery percentage" option in the pop-up interface, if you want to check the battery health, you can only change the official battery.

Summary. Hello dear! <>

I'm glad to answer for you: the way to check the battery percentage after <>the battery has been changed is the same as before the battery has been replaced

1. First, tap Settings in your phone; 2. Then click on Battery; 3. Open it to see the battery health status; 4. Swipe down the screen to see the battery consumption. I hope mine can help you, <>

How to check the battery percentage after the battery has been replaced.

Hello dear! Youkai <> stupidly

I'm glad to answer for you: the way to check the battery percentage after <>the battery has been changed is the same as before the battery has been replaced

1. First, tap Settings in your phone; 2. Then click on Battery; 3. Open it to see the battery health status; 4. Swipe down the screen to see the consumption of the battery. I hope mine can help you <>

Here's how to check your phone's battery percentage <>

1. Turn on the phone, find and enter the mobile phone settings interface. 2. After entering the settings, slide the screen to find the "Battery" option menu. 3. Click to enter the "Battery" option, click the slider button of battery percentage, and slide to the right.

4. Check whether the battery percentage icon appears in the status bar above the phone. I hope mine can help you, <>

Method.

1. Open "Settings" - "Privacy" - "Diagnosis and Usage" - "Select Automatic Sending" (Note: If you choose to send automatically on the same day, you will only see it the next day) - "Diagnosis and Usage Data" - find the option of "log-aggregated-latest date" in it, and then open it (such as today, June 21) - turn the page to the very bottom, and then slowly turn up to find one".

1200 here is the amount of power left on my iphone 4s.

Method. Second, some users may feel that the above method is very troublesome, in fact, it is also very convenient to use "Aisi Assistant" to view.

Connect your iPhone, click "Battery Details" to see the actual capacity of the battery, here is 1195mAh, and the above method is not much different from 1200mAh. Isn't this a much simpler method?

Open [Settings] - [General] on your phone. There are slight differences in different versions, for the above systems, you need to find [Settings] - [Privacy]. On the Privacy page, scroll down to the end and select Diagnosis & Dosage.

On the Diagnostics & Dosage page, click Auto Send. If the phone has been set up with Automatic Sending, tap Diagnosis and Usage Data to display the data table. In the data list, find the option of [log-aggregated-latest date], for example, [log-aggregated-2016-03-10......Then open it and open a new page, I guess many friends are scared - full screen of data!

Don't be afraid, scroll down to the end, then look up to find [. Note that 1399 is the actual capacity of your phone's battery, and the data of each mobile phone will be different, here is just an example.

Hello, in the settings, you can view.