How to clear the car dashboard wrench light on?

The small wrench light reminds you that it is time to maintain the car, in fact, it is not the meaning that the car needs to be repaired, this small wrench light is called the maintenance indicator, its function is to remind you to maintain the car after a certain mileage or time of the car.

Different models, the light time of the small wrench is different.

It should be noted that the maintenance time set by different manufacturers' models is different, so when the small wrench lights up, this is subject to the car user manual.

This small wrench is not a sign that all models have, if the car is set up with this function before leaving the factory, this sign will appear when the car needs maintenance, and after the maintenance, the staff will remove the small wrench light.

If the car is under normal maintenance and the small wrench light is on before the maintenance period is reached, or the small wrench light is on not long after maintenance, then you can remove the small wrench light by yourself at this time.

Of course, the manual removal method is different for different models, and it is best to check the instruction manual of your car. The picture above is the content on page 12 of the instruction manual of the JAC Refine S2 model.

Shanghai GM Buick and Regal car maintenance indicator removal method:

1. The ignition switch is on;

2. Press the accelerator pedal 3 times in a row within 5s.

Golf 6, Volkswagen Bora, Volkswagen Polo, Volkswagen Lavida and Volkswagen Tiguan and other maintenance lamp removal methods:

1. Turn off the ignition switch and press the "set" button on the side of the odometer;

2. Press and hold the button to turn on the ignition switch, and the maintenance cycle display area will enter the zero mode;

3. Release the button, then press the button in the lower left corner of the tachometer within 20 seconds, and the display will return to the normal display mode later.

JAC Refine S2 model maintenance indicator removal method:

1. Turn the key to the lock position, press and hold the set (clear) button and do not move;

2. Turn the ignition switch to the ON position again, and after 5 seconds, the indicator light will go out.

Audi A6, Audi Q5 maintenance indicator removal method:

1. Turn off the ignition switch and press and hold the button on the right side of the dashboard;

2. Turn on the ignition switch, the "Service" sign is displayed on the display, press and hold the button on the left side of the dashboard until the next maintenance mileage is displayed, and then release it.

If you remove the maintenance indicator by yourself, the premise must be to make sure that the car is indeed maintained on time, and you must not just remove the maintenance indicator and not maintain it on time, which will only damage your own car in the end.

When the small wrench lamp appears normally, it must be maintained in time

Therefore, when the small wrench light appears on a regular basis, it must be maintained in time, and then again, even if the car does not have a small wrench light prompt, you should also maintain the car regularly.

The purpose of car maintenance is to prolong the life cycle of the car, eliminate hidden dangers, prevent traffic accidents, slow down the deterioration process of auto parts, and ensure the safety of people in the car, so regular maintenance is necessary.

If the maintenance has not expired or just after maintenance, when the small wrench light on the instrument is on, it can be manually removed, if it is really impossible to remove, please go to the 4S shop to seek the staff to remove it with professional equipment.

Hope mine can help you, hope, thank you!

1. Prompt that it's time to go for maintenance. The presence of this sign indicates that the vehicle has traveled to the number of kilometers set by the system and requires routine maintenance of the vehicle.

2. The appearance of this sign has no impact on the normal driving of the vehicle, and after maintenance, this sign will disappear. Some common instrument cluster signs are also the following: Water temperature temperature indicator: This indicator light generally stays on when the car is first started, especially in winter.

1. The meaning of the car dashboard wrench indicator light is: the car has reached the maintenance period, and it is time to go to the 4S shop for maintenance. After the maintenance of the 4S shop, there will be no such sign. 2. If the maintenance is over, the small wrench is still displayed.

Different models. The method of elimination is not the same. There are probably two kinds, one is eliminated with a computer, and the other is a manual method that can be eliminated.

When the wrench lights up, it proves that the car should be maintained, as long as it is regularly maintained, cleared, and maintained. Reset it and you're good to go.

A wrench appears on the dashboard of the car, how to remove it quickly, professionals will tell you.

Whenever you finish the maintenance, the car repair master should reset the mileage of the maintenance time cycle, the general maintenance cycle of 5000 kilometers 180 days, you can use the diagnostic instrument of the car repair to modify these data, some car owners use a better fully synthetic oil, will let the repairman change to 7500 kilometers 180 days or even higher. The dashboard of the car can not only monitor the speed and rotation speed of the vehicle, but also reflect the driving condition of the vehicle, when the vehicle fails or needs to be adjusted, some icons will be displayed on the dashboard, and some high-end models will also have corresponding text prompts.

Why do many vehicles have a small wrench after driving for a period of time, and this small wrench is still flashing, what is the reason for this, this is actually no big problem, this is a reminder that your vehicle is to be maintained, to make it clear that it is necessary to change the oil of the vehicle. If you notice that the small wrench light of the meter is on while driving, please find a safe place to stop the car first. Then you can turn off the engine first, then start the car, set the car to factory settings, turn off the engine again and start again, and see if the indicator light is still displayed (because sometimes it is caused by driving for a long time and the driving computer will suddenly make mistakes by itself).

I believe that there are many car owners in the process of using the vehicle have encountered such a situation, the car condition is very good without any problems, and the maintenance is also done on time, but the instrument lights up a small wrench alarm light for no reason, which makes many car owners have some concerns about driving safety, and even some car owners believe that as long as the alarm light is lit, it means that the vehicle is out of order.

Small wrench lights, most of them are the maintenance cycle reminders set by the car manufacturer, prompting that it is time to maintain, and it is not excluded that there are other problems that will also be lit, such as continuing to light up after maintenance, you need to check whether there are problems in other aspects of the vehicle, and the vehicle is divided into three and seven points, so as to improve the performance and life of the vehicle.

There are two ways to eliminate the small wrench on the dashboard of the car, the first is to do car maintenance, and the second is to eliminate it by yourself, the methods are as follows: 1. Switch to instantaneous fuel consumption; 2. Turn off the ignition switch (completely close, lock the position of the car); 3. Before inserting the key, press and hold the mode switch (i.e., the switch that switches between instantaneous fuel consumption and small stroke) must not be released; 4. Turn on the ignition switch and other self-test (be sure not to ignite); 5. Release the mode switch, and at the same time touch the mode switch and the clock switch (touch time) within 30 seconds to reset to zero.

At this time, it should be that the vehicle is out of order, it may be that you did not wear a seat belt during driving, or the mileage of the vehicle is relatively large, and you need to do maintenance.

The vehicle should be inspected, and repairs should also be carried out, and the engine should be turned off, and the button next to the counter should also be held down, so that it will work.

It may be because there is a problem with your car's braking system, at this time you should drive the car to the repair shop for repair, and be sure to eliminate potential safety hazards in time.

The car must be maintained, and you can drive to the 4S shop for repair and maintenance, which can better protect the vehicle and prolong the use time of the vehicle.

1. The maintenance time set by different companies' models is also different, and the car manual shall prevail. When the maintenance is over, there is a program setting to reset the maintenance light from new zero, if it is not zero, even if the maintenance is done, the indicator light will still be lit;

2. If the small wrench is still displayed after maintenance, it can be solved in this way: turn the key to the vehicle power-on state, press and hold the button on the dashboard for 10-15 seconds without moving, and the small wrench can be eliminated;

3. The specific method of clearing: turn on the power switch, adjust the adjustment button in the combination dashboard to a single meter and clear the question, then turn off the power switch, press and hold the adjustment button at the same time, and finally turn on the power switch, and release the adjustment button in two seconds.

Extended Answer Information:

Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting or replacing certain parts of the relevant parts of the car, also known as car maintenance.

Modern car maintenance mainly includes the maintenance scope of engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.

The purpose of car maintenance is to keep the car clean and tidy, the technical condition is normal, eliminate hidden dangers, prevent failures, slow down the deterioration process, and prolong the service life.

Check to see if your car dashboard shows the wrench logo, and if so, don't worry, it doesn't mean your car is out of order. Instead, it is telling you that your car has reached the maintenance deadline and will go to a 4S shop for maintenance.

1. Press and hold the maintenance elimination shortcut key of the dashboard without releasing it. 2. Press the driver's brake pedal. 3. Rotate the car key to the ON gear.

4. When the instrument lights up, release the maintenance elimination shortcut key and then press it. 5. Press the OK button on the multi-function steering wheel to confirm the elimination.

When the small wrench is lit, it means that the car has reached the maintenance period and needs to be serviced. The maintenance light is the fault light on the car instrument, and when the fault light is on, the owner needs to troubleshoot the car according to the fault light that is lit, or go to the 4S shop for maintenance, so as not to affect the safe driving in the future. Here's why the engine failure light is on:

1. Sensors: including water temperature, crankshaft position, air flow, intake air temperature, oxygen sensor, etc., when these sensors are damaged, poor contact or signal interruption, the ECU of the car can not accurately obtain the engine data, which will cause the engine failure light to be bright;

2. Maintenance: Vehicles have a certain maintenance cycle, if the owner does not maintain on time, coupled with bad driving habits, then it will increase the burden of engine operation, and eventually lead to the engine state light on;

3. Oil quality: When buying a car, the manufacturer will recommend the owner to use which grade of fuel, which type of engine oil, if the owner does not add as required, it will cause wear and tear of the engine in the long run, resulting in the fault light on.

Photo by Q&A) Xpeng P7 Model Y Aion V Ideal One NIO EC6 Model X @2019

This little wrench is generally laughed at is a maintenance reminder is to remind you that it is time to protect the shirt Zhaoyang, if you have just done maintenance or friend rental, it may be that the four S store did not remind Li Chang to clear you zero.

Summary. 1.Insert your car keys.

2.Press and hold the maintenance elimination shortcut key on the dashboard without releasing it. 3. Press the driver's brake pedal.

4. Rotate the car key to the ON position. 5. When the instrument lights up, release the maintenance elimination shortcut button and press it again. 6. Press the OK button on the multi-function steering wheel to confirm the elimination.

1.Insert your car keys. 2.

Press and hold the maintenance elimination shortcut key on the dashboard without releasing it. 3. Press the driver's brake pedal. 4. Rotate the key to the ON gear.

5. When the instrument is bright, release the maintenance shortcut button to eliminate the shortcut button and press it again. 6. Press the OK button on the multi-function steering wheel to confirm the elimination.

Can you tell us more about that?

1. Insert the car key. 2. Press the shortcut key to eliminate the maintenance of the dashboard and do not release it. 3. Press the driver's brake pedal.

4. Rotate the car key to the ON position. 5. When the instrument lights up, release the maintenance elimination shortcut key and press it again. 6. Press the OK button of the multi-function steering wheel to confirm the elimination type.

The wrench light of the car is the maintenance prompt of the vehicle, when this jujube indicator light appears, it is not that the vehicle is faulty, but that the maintenance cycle is set, the oil should be changed, and the instrument button of the vehicle can be used to eliminate this indicator light, and the specific operation steps are as follows:

Tools: Volkswagen Sutar car, driver.

1. Press and hold the maintenance elimination shortcut key of the dashboard without releasing it.

2. Press the brake pedal of the driver trouser bucket.

3. Rotate the car key to the ON gear.

4. When the instrument lights up, release the shortcut key for maintenance and removal.

5. Press the OK button on the multi-function steering wheel to confirm the elimination.

Hello, dear. Punch Wheel will be happy to answer your <>

The elimination method of the small wrench is as follows: 1. Insert the key; 2. Press and hold the small black rod on the dashboard to adjust the time and mileage to zero; 3. Screw the car key to the ON position; 4. Press and hold the small clear button and don't let go, stop for a few seconds and then release it; 5. Press and hold the small button to the right and gently rotate it to the right to let go. The reason why the car shows a small wrench is:

The service period of the car has reached the end of the preventive work of inspecting, cleaning, replenishing, lubricating, adjusting or replacing certain parts of the car. The maintenance items of the steam disperser letter car are: 1. Replace the engine oil and oil filter element; 2. Check the braking system; 3. Check the tires; 4. Check the chassis; 5. Check the car lever; 6. Check the shock absorber shirt.